Pulsar 79187 LPS 7i Battery Pack Instruction Manual

Pulsar 79187 LPS 7i Battery Pack Instruction Manual

Specifications

LPS 7i

• SKU: 79187

• Type: Li-Ion

• Nominal capacity at +22°С (72°F), mAh: 6400

• Rated output voltage, V: 3.7

• Input voltage/charge rate (wired charging): PPS 6-8.5 V ⎓ 3 A; 5 V ⎓ 3 A

• *Charge/discharge cycles, minimum:** 300

• Charge/discharge ambient: 0…+35/- 25…+50

• temperature, °С (°F): (+32…+95/- 13…+122)

• Dimensions, mm / inch: 79х31х43 / 3.11×1.22×1.69

• Weight, kg / oz: 0.13 / 4.59

• Once reached the specified limit, the battery capacity may drop to 80%. This is normal and not a defect.

Description

LPS 7i rechargeable lithium-ion power supplies are designed for use with Pulsar Telos thermal imaging devices. Batteries support USB Power Delivery fast charging technology when using a standard charging set from Pulsar (USB Type-C cable, power adapter). LPS 7i batteries also support wireless charging.

Package Contents

• Battery
• Protective cover
• Operating Manual
• Warranty card

Precautions

• It is not recommended to charge the battery with the USB cable and wireless charger at the same time. This will not increase the charge rate and may damage the battery.

• Use the USB Type-C cable and power adapter supplied with the device (or purchased separately) to charge the LPS 7i batteries.

• Follow the safety precautions described in its Manual when using the wireless charger.

• Do not place any foreign objects between the battery and wireless charger platform.

• Do not charge the battery immediately after brining it from cold to warm. Wait at least 30 minutes for the battery to warm up.

• Do not leave the battery unattended while charging.

• Do not use the power adapter and wireless charger if they have been modified or damaged.

• Do not leave the battery plugged in after charging is complete.

• Do not expose the battery to high temperatures and naked flame.
  Do not use the battery as a power source for devices that do not support

• LPS 7i batteries.

• Do not disassemble or deform the battery.

• Do not drop or strike the battery.

• Do not submerge the battery.

• Keep the battery out of the reach of children.

Recommendations for Use

• The battery should be partially charged for long-term storage – 50 to 80 %.
• The battery should be charged at an ambient temperature of 0°C…+35°C (+32°F…+95°F). Otherwise, lifespan of the battery will decrease significantly.
• When using the battery at sub-zero temperatures, the battery capacity decreases, this is normal and not a defect.
• Do not use the battery at temperatures outside the range of – 25°С…+50°С (-13°F…+122°F) – this may reduce battery’s life.
• The battery has a short-circuit protection. However, any situation that may cause short-circuiting should be avoided.

Battery Charging

1. Remove the protective cover(6).
2. Connect the plug of the USB Type-C* cable (4) to the USB Type-C connector (1) of the battery.
3. For fast charging, connect the second end of the USB Type-C cable (4) to the Type-C connector of the power adapter* (3) by removing the Type-A adapter from the plug. When connected to a computer or a Type-A power adapter, the battery will charge at normal speed.
4. Plug the power adapter (3) into a 100-240 V socket.
5. LED (2) will display battery charge level (see Table)

can be disconnected.

Wireless Charging

1. Place the battery with the sign side on the wireless charger (5) For more efficient wireless charging, align the lightning bolt icon on the battery with the canter of the charger platform (5).**
2. Turn on the wireless charger according to its instruction manual.
3. LED (2) will display battery charge level (see Table).

• Purchased separately or supplied as package contents of a device.

** Third party-purchasing. The LPS7i battery works with all QI standard wireless chargers.

Note: Charging with a USB cable is significantly faster than using a wireless charger.

Legal Compliances and Disclaimers

The manufacturer reserves the right at any time, without mandatory notice, to make changes to the package contents, design and characteristics that do not impair the quality of the product.

Warranty for the Battery Pack is one year. For technical support please contact [email protected].

Answers to frequently asked questions about the devices can also be found in the FAQ section.

References

• Home | Vision

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>