Eesyy H7426 Bug Zapper Electric Mosquito Killer User Guide
- June 15, 2024
- Eesyy
Table of Contents
Eesyy H7426 Bug Zapper Electric Mosquito Killer User Guide
Please read the following instruction carefully
Please check the condition of the device before use. If the device has obviously been damaged, do not use the device. The device is environmentally, saves space and is hygienic (without pesticides, smoke free and is non toxic). The built in light is harmless to people, pets or plants. The highly effective fitting tube sends out special UV waves and draw in insects. The insects flies to the UV light and receives an electrical shock when in comes into contact with the electrified grid. The device is highly efficient and save energy.
Best using method and scope of application
The products can be used indoor or outdoors.
Super bright 20W Ultraviolet Light. 4200V High voltage electric shock for killing mosquitoes.
Switch ON to turn on the intelligent light sensor. The intelligent light sensor control can save your time and power. The light will turn on automatically in the dark night, and turn off in bright day. Switch OFF to turn off the intelligent light sensor. The light will stay ON to trap the mosquito.
The product is designed with dusk to dawn sensor. When the sensor is turned ON, it shall avoid being used under the strong lighting environment, otherwise, the light will not turn on. The right method are: keep the product in the dark place to let it working.
It is suggested that keep the products hanged In height of 1.2m, and 0.3m against the wall, it can help to kill the flies if add some bait into the metal net.
Removable base for easy cleaning. Easy installation for outdoor, garden, farm and restaurant etc..
To Increase the killing rate, please clean the dead mosquitoes stick In the metal net. Please keep the power off, open tie base, and use the metal bar with insulation to discharge the net, and after that, use soft brush clean It.
To Increase the killing rate, please clean the dead mosquitoes stick In the metal net. Please keep the power off, open tie base, and use the metal bar with insulation to discharge the net, and after that, use soft brush clean It.
It is sold with a brush. You can remove the base to clean it with the brush.
OPERATION
This Insect Zapper Lantern is button control.
a. By pushing the switch to the side with “I” , the unit will operate
in Bug Zapping mode, working with the insect zapping UV bulb. The UV light
will always being on.
b. By pushing the switch to the side with “o” , the unit will turn
off
C. By pushing the switch to the side with “II” , the machine realizes
the light control mode and automatically switches day and night.
Attention
- Check the local voltage before working. Do not intend to touch the internal high voltage grids using because of electric shock danger.
- Never put metal objects inside the girds while working
- The appliance is outdoor use only. It is not suitable for use in barns, stables and similar location
- The appliance is not to be used in locations where nameable vapors or explosive dust is likely to exist. Hang or mount the appliance on place where children can’t reach.
- Turn on the switch after plugging in. Pay attention not to block the light on the light sensor.
- Never remove any fixed part of the appliance to make any internal adjustment avoiding electric shock. If the lamp starters or other part of appliance is damaged, the manufacturer, its service agent or similarly qualified person must replace it in order to avoid a hazard.
- Unplug the appliance before cleaning. Use suitable brush to clean the high voltage metal and throw away the bodies of insects on the ,collection tray every week. Be sure to cut off electricity when cleaning the machine.
- No touching the high-voltage grid by fingers or metal
- No washing by water, no placing in rain
- No use in inflammable or explosive locales and alike -Repair should be carried out by the manufacturer or qualifies electricians.
- Make sure that your local voltage and frequency should be suitable for the machine. Ensure earthing-connection to prevent damage or danger. This high voltage insect killer must to be kept away and out of reach from children.
Maintenance
Users shall wash the metal net In a frequently period, and shall keep the lamp
powered off tile washing, and use the metal bar flutist. Insulation to
discharge the net, and after that, use soft brush clean it.
Do not keep the product in the water.
Do not crash fire metal net to avoid them connected and lose the function of
mosquito eradication.
Shall keep them carefully, avoid to shake them roughly which may damage the
tube or components.
Technical information
Model NO.: IN10-E007
Input voltage: 90-130V 60Hz or 220-240V 50Hz
Light source: 20W UV tube
High voltage metal grid: 4200V
Level waterproof: IPX4 (Splash proof, not against heavy rain)
Warning
- Check the local grid voltage if meet the products working voltage before using the products.
- High voltage dangerous.
- The products only suit inner use.
- The products could not be used in the garage, tank farm, stable, stack or some other place where there are explosive things, and animals
- Keep the plug out before clean the net, use the brush clean he voltage net, and clean t tie dead mosquito on the lamp every week.
- Ensure power off before clean or repair the lamp.
- Do not touch the high voltage net tiller the products are wording, and keep item In the place where the kids could not reach.
- Do not wash the products by water, and keep them avoid of the rain.
- To avoid the dangerous, please give the products to the manufacturer or the professional repair center for the maintenance once they are broken.
Email: support@ieesyy.com
Website: www.ieesyy.com
EPA Est No.: 99305-CHN-1
MADE IN CHINA / IN CHINA HERGESTELLT/FABRIQUE EN CHINE FATTO IN CINA/HECHO EN
CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>