Eesyy JY-6-D Electric Mosquito Killer Instruction Manual

June 5, 2024
Eesyy

Easy JY-6-D Electric Mosquito Killer

Instruction Manual

Product Name: Mosquito Killer;
Product Model: JY-6-D;
Please read the user manual carefully before using it.
Dear users:
Thanks for your using our electronic mosquito killer; the product is a highly efficient modern family mosquito eradication product, which is designed with lightweight, low power consumption, safe, and environmentally; there is no side effect, and could be used the whole year.

Shape and part name.


  • Cover
  • The front
  • Cover
  • PCB
  • Lamp
  • Storage Cover
  • On-off
  • The Back
  • High Voltage Grid

Specification

Input Voltage: AC 85-265V~ 50/60Hz;
Power: 4W
Net Voltage: More than 600V DC
Resistance: Less than 500Q;
Leakage AMP: 0.1A

Unique Advantage

  1. Environmental friendly; no need to add any pesticide, clean, no poisonous, no stink, which changed the situation of polluting the environment by using traditional mosquito eradication products.
  2. Attract the mosquito, flies, etc insects by the special light of the tube, and kill them by the electric shock once they flew into the metal net.
  3. Mild light color, lower consumption lighting, good decoration, it can be used in the whole inner house, and very convenient.
  4. Long lifespan, can be used continuously for a long time.

Best using method and scope of application

  1. Please turn on the switch before use.
  2. The products can be used in the bedroom, living room, hotel, restaurant, office, etc. where the products are allowed to be used indoors.
  3. The products can be used only indoors, not outdoors, but not including the stack, stable, etc.
  4. The product is designed with energy-saving, decoration, and sleepy mild lighting, so it shall avoid being used in the strong lighting environment; otherwise, it will affect the mosquito killing. The right method is below, for example, keep the house lighting off, and use the products before sleeping, turn off all strong lighting for 10-20 minutes, or keep the products in the dark place while working or learning.
  5. Suggested height of hanging, keep the products hanged at height of 1.2m, and 0.3m against the wall.
  6. It can help to kill the flies if add some bait into the metal net in the daytime.
  7. To increase the killing rate, please clean the dead mosquito stick in the metal net. Please keep the power off, open the base, and use the metal bar with insulation to discharge the net, and after that, use a soft brush clean it.

Attentions

  1. Please keep the gap of the net edge sealed.
  2. Do not touch the net with fingers or conductive things.
  3. Forbid to use the products in explosive place
  4. Keep it power off before replacing the tube. After the power is off, the net will retain a little electricity use the insulated metal bar to discharge the high voltage net, and then disassemble the plastic base to replace the tube.
  5. If using the lengthened wire, please keep the power away from the wet environment, and avoid damaging the wire.
  6. Do not pull the wire roughly; once find the wire is damaged, please stop using the products, and please send them to the professional repair center to repair them.
  7. Keep the products away from the kids.
  8. If the water of the garden sprays on the product, it will be in danger of electric shock.
  9. The product is not waterproof (IPX0)

Common failures & Treatment methods

  1. Tube shinning: Voltage below level or the tube is working beyond the lifespan, which needs to balance the voltage or change new tube
  2. The gird is without high voltage: The metal net connected with each other or the components broken, which need to have it repaired by the professional service center.

Maintenance

  1. Users shall wash the metal net in a frequent period, shall keep the lamp powered off while washing, and use the metal bar with insulation to discharge the net, and after that, use a soft brush clean it. Do not keep the product in the water.
  2. Do not crash the metal net to avoid them being connected and losing the function of mosquito eradication.
  3. Shall keep them carefully and avoid shaking them roughly; which may damage the tube or components.

Warning

  1. Check the local grid voltage if meet the products working voltage before using the products.
  2. High voltage is dangerous.
  3. The products only suit inner use.
  4. The products could not be used in the garage, tank farm, stable, stack, or some other place where there are explosive things, and animals.
  5. Keep the plug out before cleaning the net, use the brush clean the high voltage net and clean the dead mosquito on the lamp every week.
  6. Ensure power is off before cleaning or repairing the lamp.
  7. Do not touch the high voltage net while the products are working, and keep them in a place where the kids could not reach.
  8. Do not wash the products with water, and keep them to avoid the rain.
  9. To avoid the danger, please give the products to the manufacturer or the professional repair center for maintenance once they are broken or need to change the tube.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals