Eesyy JY-6-D Electronic Mosquito Killer User Manual

Eesyy JY-6-D Electronic Mosquito Killer

Dear users: Thanks for your using our electronic mosquito killer; the product is high efficient modern family mosquito eradication product, which is designed with lightweight, low power consumption, safely and environmentally, there are not side effect, and could be use whole year.

Shape and part name

Specification

• Power: AC 85-265V~ 50/60HZ: Net voltage; More than 600V DC
• Resistance: Less than 50052; Leakage AMP: 0.1A 85-265V~ 50/60HZ

Unique Advantage

1. Environmental friendly, no need to add any pesticide, clean, no poisonous, no stink, which changed the situation of polluting the environment by using traditional mosquito eradication product.
2. Attract the mosquitos, flies etc insects by the special light of the tube, and kill them by the electric shock once the flied into the metal net.
3. Mild light color, lower consumption lighting, good decoration, it can be used in whole inner house, and very convenient.
4. Long lifespan, can be used continuously in a long time.

Best using method and scope of application

1. Please turn on the switch before use.
2. The products can be used in the bedroom, living room, hotel, restaurant, and office etc. where the products are allowed to be used indoor.
3. The products can be used only indoors, not outdoors, but not including the stack, stable etc.
4. The product is designed with energy saving, decoration, and sleepy mild lighting, so it shall avoid being used under the strong lighting environment; otherwise it will effect the mosquito killing. The right method are below, for example, keep the house lighting off, and use the products before sleeping, or turn off all strong lighting for 10-20 minutes, or keep the products in the dark place while working or learning.
5. Suggested height of hanging, keep the products hanged in height of 1.2m, and 0.3m against the wall.
6. it can help to kill the flies if add some bait into the metal net while in daytime.
7. To increase the killing rate, please clean the dead mosquitos stick in the metal net. Please keep the power off, open the base, and use the metal bar with insulation to discharge the net, and after that, use soft brush clean it.

Attention

1. Please keep the gap of the net edge sealed.
2. Do not touch the net by fingers or conductive things.
3. Forbid to use the products in explosive place
4. Keep it power off before replace the tube, After power off, the net will remain a little of electricity, use the insulated metal bar to discharge the high voltage net, and then disassemble the plastic base to replace the tube.
5. If use the lengthened wire, please keep the power away from the wet environment, and avoid damaging the wire.
6. Do not pull the wire roughly, once find the wire damaged, please stop using the products, and please send them to the professional repair center to repair them.
7. Keep the products away from the kids.
8. If the water of the garden sprays to the product, it will be in danger of electric shock.
9. The product is not waterproof (IPXO)

Common failures & Treatment methods

1. Tube shinning: Voltage below level or the tube is working beyond the lifespan, which need balance the voltage or change new tube
2. The gird is without high voltage: The metal net connected with each other or the components broken, which need to have it repaired by professional service center.

Maintenance

1. Users shall wash the metal net in a frequently period, and shall keep the lamp powered off while washing, and use the metal bar with insulation to discharge the net, and after that, use soft brush clean it. Do not keep the product in the water
2. Do not crash the metal net to avoid them connected and lose the function of mosquito eradication.
3. Shall keep them carefully, avoid shake them roughly, which may damage the tube or components.

Warning

1. Check the local grid voltage if meet the products working voltage before using the products.
2. High voltage dangerous.
3. The products only suit inner use.
4. The products could not be used in the garage, tank farm, stable, stack or some other place where there are explosive things, and animals.
5. Keep the plug out before clean the net, use the brush clean the high voltage net, and clean the dead mosquito on the lamp every week.
6. Ensure power off before clean or repair the lamp.
7. Do not touch the high voltage net while the products are working, and keep them in the place where the kids could not reach.
8. Do not wash the products by water, and keep them avoid of the rain.
9. To avoid the dangerous, please give the products to the manufacturer or the professional repair center for the maintenance once they are broken or need change the tube.

Product Model: JY-6-D; POWER: 4W; input Voltage : 85-265V ~ 50/60HZ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>