kogan com KAACAM35MMA Retro 35mm Reusable Film Camera User Guide
- June 15, 2024
- Kogan com
Table of Contents
kogan com KAACAM35MMA Retro 35mm Reusable Film Camera
Product Usage Instructions
Installing the Battery
- Open the battery cover (I) in the direction of the arrow.
- Insert one AA alkaline battery into the battery chamber, ensuring correct polarity.
- Make sure the battery is inserted according to the correct polarity (the + and – ends of the battery), as indicated inside the battery compartment.
- Switch the flash button (P) to the “ON” position.
- Wait for the Flash Ready Light (O) to glow. Once the light is on, the flash is ready for taking pictures.
Loading Film
- Press the latch (A) in the direction of the arrow and open the camera back door (B).
- Lift up the film rewind crank (C) and place a new roll of film into the film chamber (J).
- Push the rewind crank (C) back into place.
- Pull out the film from the film canister and hook the 2nd hole onto the film take-up spool (D).
- Slightly advance the film by turning the film advance wheel (E).
- Ensure that the film lays flat against the center of the camera and close the camera’s back door.
- Continue to advance the film by turning the film advance wheel (E) until it stops.
Taking Pictures
- Press the shutter release button (N) to take a picture.
- Repeat this procedure one more time to advance the film to the next frame.
- The Film Counter (F) will now show number 1, indicating that the camera is ready for taking pictures.
- For best results, stand at least 1 meter (3 feet) from the subject and take photos in sunny weather. Keep the sun at your back when taking pictures.
Rewinding and Film Processing
- After all the pictures are taken, press the rewind button (G) located at the bottom of the camera.
- Turn the film rewind crank (C) clockwise until all film is rewound back into the film canister.
- Open the camera back door (B).
- Lift up the film rewind crank (C) and remove the film for processing.
OVERVIEW
A | Latch |
---|---|
B | Back Door |
C | Film Rewind Crank |
D | Film take-up Spool |
E | Advance Wheel |
F | Film Counter |
G | Rewind Button |
H | Hand Strap Hole |
I | Battery Cover |
J | Film Chamber |
K | Flash |
L | Viewfinder |
M | Lens |
N | Shutter Release |
O | Flash Ready Light |
P | Flash Button |
OPERATION
Open the battery door in the direction of the arrow. Insert one “AA “alkaline battery into the battery chamber. Make sure the battery is inserted according to the correct polarity. The correct polarity (the “+” and “- “ends of the battery) is indicated inside the battery compartment.
Switch the flash button to the “ ” position. Wait for the Flash Ready LED to glow. Once the Flash Ready Light glows, the flash is ready for taking pictures.
|
---|---
Press the latch A in the direction of the arrow and open the camera back
door B. Lift up the film rewind crank C and place a new roll of film
into the film chamber.|
Push the rewind crank C back into place. Pull out the film from the film
canister and hook the 2nd hole onto the film take- up spool D. Slightly
advance the film by turning the film advance wheel E.|
Ensure that the film lays flat against the centre of the camera and close the
camera’s back door.| ****
---|---
Continue to advance the film by turning the film advance wheel E until it
stops. Press the shutter button. Repeat this procedure one more time. The Film
Counter F will now show number “1” and the camera is ready for taking
pictures.|
For best results, stand at least 1 meter (3feet) from the subject and take
photos in sunny weather. When taking pictures, keep the sun at your back.|
After all the pictures are taken, press the rewind button G located at the
bottom of the camera. Turn the film rewind crank C clockwise until all
film is re-wound back into the film canister.|
Open the camera back door B. Lift up the film rewind crank C and
remove the film for processing.|
SPECIFICATIONS
- Film Format: 135 Film (24x36mm)
- ISO: 200/400
- Optics Lens: 28mm, F=8, 1 element
- Focusing: Focus Free, 1m~∞
- Shutter Speed: 1/120s
- Film Transport: Manual wind and rewind
- View Finder: Field=70%
- Power Source: 1AA -Alkaline Battery
- Dimensions: 118(W) x 66(H) x 42(D) mm
- Weight: 110gram
- Main Plastic Material: ABS
Need more information?
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>