STARTUP A11 2000A Jump Starter Battery Pack Instruction Manual

User Manual
MULTI-FUNCTIONR
Jump Starter

DANGER
Please read the user manual careuly before using this product, thervise the following consequences may occur eectic shock, explosin, fre,resling in personal inury or propery loss.
Get an eectric Shock._The product s an slectical devie that shocks and causes, serous nury. Dortt cut the poer cords Donit get mmersed in water or wet.

Functional diagram

1. Display Screen
2. USB Output Port
3. Type-C Charginigport
4. Main Switch
5. FUNC Key
6. Start Port
7. Emergency Lights

Technical Parameters

Car start steps

1. Please clean the battery positive and negative poles of dirt first!
2. The cable plug should be firmly inserted into the start port.
3. Do not mistake positive and negative!
4. The metal surface that the clip engages is as large as possible.

Function key introduction

Discription of charge and discharge

When charging, e sure to use a regular charger that matches its parameters. Do not use inferior charger o charge, otherwise safety Secidents may occur. Please do not connect the over power products when outputing USE.

Toxic and Harmful Substances

O:indicates all homogeneous materials’hazardous substance content are below the MCV limit specified in the standard (EU)2015/863.

Warning

1. The emergency starting operation steps of the car cannot be reversed.
2. in case of failure, please contact the dealer for handling, It is forbidden to disassemble the main machine without authorization; otherwise safety accidents may be caused.
3. The positive and negative poles of the power supply are prohibited from butt joint, reverse connection or indirect short circuit; otherwise safety accidents will be caused.
4. When using or charging, please stop using and consult customer service if any abnormal situation is found.
5. Please keep away from high temperature or humid environment, and do not place it in direct sunlight.
6. Children are prohibited from contacting this product to avoid safety accidents.
7. When charging the product, please put it in an empty place and have an adult look after it.
8. Please be sure to read the instructions and follow them. If you have any questions, please contact customer service at any time.
9. It is strictly prohibited to disassemble, puncture, refit, short-circuit the product or put it into water, fire or expose it to an environment with a temperature higher than 65°Cto avoid damage to the product or other hazards.
10. Do not clamp battery clamps or connect the positive and negative electrodes directly or indirectly with conductors to avoid safety accidents.

Maintenance tips

1. This product can effectively deal with the car start-up failure caused by sporadic problems of car battery such as insufficient electricity and low temperature. However, it can only be used as emergency equipment and cannot replace the frequent use of car batteries or professional rescue. If the battery is aged, please replace the new battery in time after starting the car. After the car starts, please replenish the electricity in time for the next use.

2. Do not start the car at less than 60% of the power,otherwise it will easily lead to over discharge of the battery and damage to the battery core.

3. The best way to maintain the emergency starting power supply for automobiles is to use it ligntly and charge it quickly. The greater the frequency and number of times it is used, the faster the battery will lose.
   The smaller the degree of deep discharge of the starting power supply, the longer the use time. If possible, avoid frequent full charge and discharge.

4. The start pot is the direct output portofthe battery. It i ot protected wand must not be irectly connected toproducts without voltage protection.
   Otherwise, the products and power supply may be damaged.

5. When not n use or along period of tme{more than 15days), the battery has slf.consumption, which requires regular check to maintain a certain amount of electicty and charge and discharge at least once a month. Otherwise, the power supply may be damaged.

Warranty statement

Within 12 months from the day aftr you sign for the product within 1 months for accessories, f there s any product quality problem caused by non-human factors you can enjoy free maintenance service upon confirmation by the manufacturer
Main switch instructions:

1. Unauthorized maintenance, misuse, colision, negligence, abuse, ‘excessive discharge,liquid ntake, accident,alteration,incorrectuse of non-product accessories or accessories that do nat confor to parameters, or tearing up, alterng labels and production dates.
2. The validity priod o thee guarantees has expired,
3. Damage caused by force majeure.
4. Performance failue of this product and accessores caused by human factors,
5. D0 not operate or maintain according to nstructions,
6. Normal battery loss and perfomance degradation caused by power slpply usage.

Warranty Card
For warranty service,please show this warranty card and fillin the relevant contents in detail. The manufacturer provides warranty service to the purchasing customer for 12 months from the next day when the product is received, and 1 months for accessories. For products that are not covered by the warranty, our company can provide maintenance services, but the maintenance expenses and round-trip freight shall be borme by the customer.
Note: This product s for commercial use and only provides ‘one-month warranty service.

Model| | Serial NO.|
---|---|---|---
Name| | Tel.
DATE OF Purchased|
DATE OF Repair|
Address|
Purchasde From|
Description defects

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>