CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User Manual

May 15, 2024
CO-Z

CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User Manual

CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User
Manual

Safety Information

⚠ Warning!

  • ONLY assemble and use this device in accordance with these instructions and for its intended purpose. Do not allow unsupervised use by children, by anyone who has not read these instructions, or by any person whose mental or physical condition precludes safe use.
  • ALWAYS keep your work area clean and well lit. Cluttered and dark areas invite accidents.
  • Make sure your worksite is well ventilated. For work in confined spaces, ALWAYS connect this device to the outdoors using the exhaust hose and wear proper breathing protection such as a respirator to prevent accidental inhalation of carcinogenic paint particles or other debris. If becoming nauseous or disoriented, stop work, turn off this device and any other electrical appliances for your work, and leave the area. Also don appropriate hand protection during assembly and eye protection during work.
  • ONLY place this device on even, stable, and nonslip surfaces. Never use this device in the presence of any flammable, explosive, or corrosive liquids, gases, or dust.
  • ONLY use this device with stable and compatible power sources. Do not modify the power plug or move this device by pulling on its power cord. In case of power loss during operation, unplug this device IMMEDIATELY until power is restored.
  • DO NOT allow any electrical components to become wet or operate this device with wet hands or in highly humid environments. If any electrical component becomes wet accidentally, disconnect this device from power and allow time for it to dry completely before further use.
  • DO NOT leave this device unattended while it is in operation.
  • ALWAYS disconnect this device from power before performing any inspection, cleaning, maintenance, or repair.
  • DO NOT operate this device if it is damaged or shows signs of malfunction. Repair or replace problematic components before further use. Never replace any parts with nonidentical ones.

Specifications

CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Specifications

Product Diagram

CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User Manual - Product
Diagram

Package List

CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User Manual - Package
List

Assembly

CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Assembly CO-Z
V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Assembly CO-Z
V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Assembly CO-Z
V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Assembly CO-Z
V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Assembly CO-Z
V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Assembly

Operation

CO-Z V20230508 Airbrush Spray Booth with Exhaust Fan User Manual -
Operation

Maintenance

  • Turn off and unplug this device between uses and before undertaking any inspection, cleaning, maintenance, or repair.
  • After each use, remove the turntable, rinse away the remaining paint, and dry it completely with a soft cloth. Clean the boards, filter, and other external surfaces of this device with a soft damp cloth. Do not use harsh abrasives or caustic chemicals.
  • Periodically check the exhaust system of this device for any obstructions, clearing the vent, exhaust hose, nozzle, etc. using a dry brush or other similar tools as needed. Also inspect the other components for any wear, breakage, or malfunction between uses, repairing or replacing any problematic parts before further use. Only use identical parts and always fully replace any damaged electrical connections.
  •  If this device will not be used for an extended period of time, unplug, clean, and fully dry it before storing in a cool dry location away from direct sunlight and inaccessible to children.

Disposal

Electrical products should not be disposed of with household products. In the EU and UK, according to the European Directive 2012/19/EU for the disposal of electrical and electronic equipment and its implementation in national laws, used electrical products must be collected separately and disposed of at the collection points provided for this purpose. Locations in Australia, Canada, and the United States may have similar regulations. Contact your local authorities or dealer for disposal and recycling advice.

Contact Us

Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.https://sp9c.com/GFgmW

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals