DENSO TN0036B Car Audio Instruction Manual

DENSO TN0036B Car Audio Instruction Manual

Ratin

Button Function Spec

voice recognition
④| VOL DOWN| Short Push: Decrease Volume Down 1 step Long Push: Decrease Volume Down continuously
⑤| VOL UP| Short Push: Increase Volume Up 1 step Long Push: Increase Volume Up continuously

Radio operation procedure

Operation procedure

1. (ACC-ON)
   After the ACC-ON, confirm that Toyota screen is displayed.
   

2. The screen is changed to “CAUTION” screen after a few seconds.
   Note: It takes a little longer for the first time of ACC-ON.
   

3. Press the “Continue” button on the face panel after a few seconds to move MENU screen.
   

4. Press the POWER button.
   When the Radio Mode Window on the screen is pressed,”FM1″ screen is displayed.
   

5. Confirm that the screen is changed as below,
   Please push down the ”<”button or ”>”button.
   This will start to SEEK.
   
   ※Same as AM/DAB mode.

Operating manual (Bluetooth/Handsfree)

1. After the ACC-ON, confirm that Toyota screen is displayed.

2. The screen is changed to “CAUTION” screen after a few seconds.
   
   Note: It takes a little longer for the first time of ACC-ON.

3. Press the “Continue” button on the face panel after a few seconds to move MENU screen.
   

4. Please press the “Setting” button on the face panel to move to Settings screen

5. Confirm if ”Settings” screen is displayed, select the ”Bluetooth” button on the display.
   

6. Please press the ”Add Device” button of the screen
   

7. Please press the ”Search   Device” button of the screen
   

8. Confirm if screen is changed as below,
   
   Please set iPhone or iPod in pairing mode.
   ※Displays when you have more than one pairing equipment

9. Select the iPhone or iPod to connect.
   
   ※ Operate the phone after the message on the screen

10. ”Connection Completed” is displayed if completed.
    

Operating manual (Wi-Fi/Carplay)

1. After the ACC-ON, confirm that Toyota screen is displayed.
   

2. The screen is changed to “CAUTION” screen after a few seconds.
   Note: It takes a little longer for the first time of ACC-ON.
   

3. Press the “Continue” button on the face panel after a few seconds to move MENU screen.
   

4. Please press the “Setting” button on the face panel to move to Settings screen
   

5. Confirm that the screen will change to the “Settings” screen, slide it down and select the “Seach Apple CarPlay Device” button on the screen.
   

6. Please press the ”Search” button of the screen At this time, turn on Bluetooth on the iPhone to be connected.
   

7. Please Select the connected iPhone.

8. If the display looks like the one below, press the [OK] button on the product side and press [Pairing] on the iPhone side.
   

9. Connection is completed when the screen automatically transitions to the CarPlay screen.
   

FCC Operating manual Requirement

Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION: Radio Frequency Radiation Exposure

This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>