CO-Z V20221214 Salon Chair for Hairdressing Classic Barber Chair User Manual
- May 15, 2024
- CO-Z
Table of Contents
CO-Z V20221214 Salon Chair for Hairdressing Classic Barber Chair
Specifications
- Height Range: Adjustable
- Seat Area: Standard
- Weight Capacity: Not specified
- Net Weight: Not specified
Safety Information
Warning
- ALWAYS ensure all fasteners and components are intact and securely tightened before each use.
- DO NOT use this chair if it is damaged or malfunctions. Repair or replace worn or broken parts before further use.
- DO NOT load this chair with more than 200 kg (440 pounds).
- DO NOT leave children or persons with compromised physical or mental capabilities using this chair without close supervision.
- Store this product out of the reach of children after use.
Product Diagram
Package List
No. | Part | Qty. |
---|---|---|
1 | Seat | 1 |
2 | Backrest | 1 |
3 | Footrest | 1 |
4 | Hydraulic Pump | 1 |
5 | Pedal | 1 |
6 | Base | 1 |
7 | M5×25 Bolts | 6 |
8 | M5×20 Bolts | 6 |
9 | Metal Washers | 2 |
10 | Plastic Washers | 4 |
11 | Caps | 4 |
12 | M5 Hex Wrench | 1 |
13 | M4 Hex Wrench | 1 |
Specifications
Height Range | 84–94 cm (33.1–37 in.) |
---|---|
Seat Area | 50 × 50 cm. (19.6 × 19.6 in) |
Weight Capacity | 200 kg (440 lb.) |
Net Weight | 22 kg (48.5 lb.) |
Assembly
- Place the hydraulic pump onto the base, aligning its bottom holes with those of the base. Secure the pump using the M5×20 bolts and tighten them with the M5 allen key.
- Loosen the pre-installed set screws on the pump using the M4 allen key. Fit the pedal onto the pump and secure it by retightening the screws.
- Place the backrest between the armrests, aligning its holes with those in the connecting plates of the armrests. Secure the backrest using the four plastic washers and four M5×25 bolts. Attach the provided caps to the bolts and press them into place.
- Fit the footrest onto the bottom of the seat. Secure it using the remaining two M5×25 bolts together with the metal washers. Tighten the bolts with the M5 allen key.
- Insert the top of the hydraulic pump into the central hole underneath the seat. Place the chair on a level surface and press down on both armrests until the seat is secure.
Adjustment
- To raise the chair, press the pedal lightly, quickly and repeatedly until your desired height is reached.
- To lower the chair, hold the pedal while someone is sitting in it or while pushing down on it.
Maintenance
- The exterior of this chair should be cleaned periodically with a soft damp cloth. Do not use abrasive cleaners or caustic chemicals.
- Check the parts for any looseness, wear, or damage after prolonged use. Tighten, repair, or replace any problematic parts before further use.
- If this chair will not be used for a long period of time, store it in a cool, dry, and safe place.
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and
we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
FAQ
- Q: How do I adjust the footrest?
- A: The footrest is adjustable by manually moving it into a comfortable position while seated in the chair.
HBC-LK52-BK Rev. 14 Dec. 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>