CO-Z WWA-W114-UK Automatic Watch Winder Box User Manual
- June 15, 2024
- CO-Z
Table of Contents
4-Watch Winder
User Manual
Read Carefully Before Use
Keep for Future Reference
Disclaimer
This mechanical watch winder maintains the service of active watches but
CANNOT by itself restart completely stopped ones. Manually wind any such
stopped watches before placing them on the winder.
Similarly, this winder’s turntables are bidirectional, alternating between
clockwise and anti-clockwise rotation. It is unsuited for use with watches
with a unidirectional bezel, such as most premier diving watches.
Safety Information
Warning!
- ONLY use this device with a stable compatible power source.
- ONLY use this device on stable level surfaces.
- DO NOT place this device near any flammables or explosives.
- DO NOT let children or persons with compromised physical or mental capabilities use this device without close supervision.
- Disconnect this device from its power source when not in use. Store out of the reach of children.
Specifications
| Input Power | 220V/50Hz |
|---|---|
| Dimensions | 34 × 18 × 20 cm (13.5 × 7 × 7.9 in.) |
| Watch Capacity | 4 |
| Net Weight | 3 kg (6.6 lb.) |
Package List
| No. | Part | Qty. |
|---|---|---|
| 1 | Watch Winder | 1 |
| 2 | Power Cord | 1 |
| 3 | Cloth | 1 |
Product Diagram
Control Panel
Operation
- Open the cover of your watch winder and take out one of the cushions. Loosen your watch strap, place the watch on the cushion wrapping the strap around it, and refasten the strap. Fit the cushion back into place on its turntable.
- Repeat as needed, using only one watch per cushion. Close the cover.
- Connect the power cord to the port on the back of the winder and a stable compatible power source.
- Flip both or either power switch(es). The corresponding turntable(s) will rotate anti-clockwise for 2 minutes, pause for 6 minutes, rotate clockwise for 2 minutes, and pause for 6 minutes again before beginning the cycle again. For best results, rotate your watches at least 3 hours each time.
- When finished, turn off the turntables. For best results, unplug the winder between uses.
Maintenance
- Clean the exterior of your watch winder with the provided cloth as needed. DO NOT use abrasive or caustic chemicals.
- If any part of the winder is damaged or worn, have it repaired or replaced before further use.
- If the winder will not be used for a long period of time, disconnect it from its power source and store it in a cool, dry, and safe place away from direct sunlight and inaccessible to children.
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at [email protected] and
we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
https://sp9c.com/dRJbp
WWA-W114-UK Rev. 18 Aug. 2022