CO-Z V20221214 Automatic Watch Winder User Manual
- June 14, 2024
- CO-Z
Table of Contents
Watch Winder
User Manual
Read Carefully Before Use
Keep for Future Reference
Disclaimer
This mechanical watch winder maintains the service of active watches but
CANNOT by itself restart completely stopped ones. Manually wind any such
stopped watches before placing them on the winder.
Similarly, this winder’s turntable is bidirectional, alternating between
clockwise and anti-clockwise rotation. It is unsuited for use with watches
with a unidirectional bezel, such as most premier diving watches.
Safety Information
Warning!
- ONLY use this device with a stable compatible power source.
- ONLY use this device on stable level surfaces.
- DO NOT place this device near any flammables or explosives.
- DO NOT let children or persons with compromised physical or mental capabilities use this device without close supervision.
- Disconnect this device from its power source when not in use. Store out of the reach of children.
Specifications
| Dimensions | 12.2 × 13 × 16.5 cm (4.9 × 5.2 × 6.5 in.) |
|---|---|
| Input Power | Standard USB |
| Watch Capacity | 1 |
| Net Weight | 0.9 kg (2 lb.) |
Package List
| No. | Part | Qty. |
|---|---|---|
| 1 | Watch Winder | 1 |
| 2 | USB Cable | 1 |
| 3 | DC Cable | 1 |
| 4 | Cleaning Cloth | 1 |
Product Diagram
Control Panel
Operation
-
Open the cover and take out the cushion. Loosen your watch strap, place the watch on the cushion, wrap the strap around it, and refasten the band. Fit the cushion back into place on the turntable and close the cover.
-
Connect the input port on the control panel to any standard USB port using the provided USB cable. To run another winder together with this device, you can connect it to the output port using the provided DC cable.
-
Move the switch to Brief (B). The turntable will rotate clockwise for 2 minutes, pause for 6 minutes, rotate anti-clockwise for 2 minutes, and pause for 6 minutes again before beginning the cycle again. For best results, rotate your watch at least 3 hours each time.
You can also move the switch to Long (L). The turntable will rotate clockwise for 5 minutes and then anti-clockwise for 5 minutes, alternating for 3 hours before pausing for 9 hours and then beginning the cycle again. -
When finished, turn your winder off by moving the switch back to OFF. For best results, unplug this device between uses.
Maintenance
- Clean the exterior of your watch winder with the provided cloth as needed. DO NOT use abrasive or caustic chemicals.
- If any part of the winder is damaged or worn, have it repaired or replaced before further use.
- If the winder will not be used for a long period of time, disconnect it from its power source and store it in a cool, dry, and safe place away from direct sunlight and inaccessible to children.
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at [email protected] and
we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
WWA-W125-BK Rev. 14 Dec. 2022