ONECONCEPT 10030788 Ecowash Pico Mini Washing Machine User Manual

: June 17, 2024
: ONECONCEPT

Table of Contents

Ecowash-Pico
- Washing Machine
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ecowash-Pico

Washing Machine

10030788
10030789
10030791

Dear customer,

Congratulations on the purchase of your device. Please read the following instructions carefully and follow them to prevent potential damage. We accept no liability for damage caused by disregarding the instructions and improper use. Please scan the QR code to access the latest operating instructions and further information about the product.

TECHNICAL INFORMATION

Product code	10030788, 10030789, 10030791
Power supply	220-240 V ~ 50/60 Hz

SAFETY INSTRUCTIONS

Read all instructions carefully and keep the manual in a safe place for future reference.
To reduce the risk of electric shock in the event of a fault or malfunction, the unit must be connected to a grounded outlet. If you are not sure whether your outlet meets the requirements, seek advice from an electrician. Only connect the appliance to sockets that correspond to the specified voltage of the appliance.
Place the unit near a power socket. Please make sure that the socket is always accessible so that you can unplug the appliance before you move it, clean it or if you are not going to use it for a long time.
Do not bend, pull or twist the power cord and make sure that no one steps on it.
If the power cord is damaged, it must be replaced by the manufacturer, an authorised specialist company or a similarly qualified person.
Do not place the unit in damp rooms such as bathrooms. Make sure that no water drips onto the unit.
Do not use water hotter than 50 °C.
If you place the appliance on a carpet, make sure that the carpet does not block the air inlet at the bottom of the appliance.
Do not wash garments with down, mackintoshes or other waterproof garments to avoid strong vibrations during washing.
Never put your hands into the washing machine or spin dryer while the appliance is in operation. Make sure that children do not lean over the laundry drum.
Do not try to repair the device yourself.
Do not place hot, heavy or fragile objects on the appliance.
Do not wash clothes that are contaminated with highly flammable substances such as petrol or varnish.
Children over 8 years as well as mentally, sensory and physically impaired persons may only use the device if they have been informed in detail about the functions and safety precautions by a supervisor responsible for them beforehand and understand the associated risks.
Do not expose the unit to direct sunlight and do not place it near heaters.
Only plug the unit into sockets where no other electronic devices are connected.
The distance between the drain hose and the drain should not be greater than 10 cm, otherwise the water cannot drain completely from inside the machine.
Do not step on the drain hose.

COMMISSIONING AND OPERATION

Getting Started

The socket must be earthed.
Lay out the drain hose so that the water can drain off easily.
Plug the power plug into the mains socket.
Connect the water supply: Insert the hose into the opening provided until you hear a click.

Overview washing process

1

| 2|

3

---|---|---
| |

Washing

| Pump out half|

Rinsing

Caution: If the water level is too high, the water will spill out of the drum.

To avoid deformation of clothes, fold them and close zips (e.g. on trousers).
Prepare the clothes as shown in the picture. All pockets must be emptied.
Remove coins, nails, etc. Fur trim or other ornaments must be pulled inside out. Bold colours should be washed individually.

Washing

Fill with water: Fill with water to the desired level.
Add detergent and select the washing time.
Load laundry: Load the laundry. Decrease the amount of water if necessary.
Adjust the water flow: Adjust the water flow appropriately. Drain the water after washing.
Disconnect the unit from the mains. Observe the safety instructions when doing so. After you have drained the water from the washing drum, set the control from “Pump out” back to “Standard”.

Spin function

1. After the washing process is finished, drain the water and empty the washing drum.
2. Place the spin basket on the appliance and turn it counter-clockwise. Make sure it is firmly in place.
3. Place the laundry in the spin basket and press down the pressure cover to prevent the clothes from falling out during spinning. Close the top cover and set the programme selector switch to the “Spin” position. Select the time according to the type of clothes and start spinning. If the time setting is too long or you want to stop halfway, turn the timer counter-clockwise to the “off” position. Wait until the basket has stopped.

Note: The clothes should be evenly flat and covered with a pressure cover to avoid unintentional displacement of the machine due to spinning.

4. When the spin time is up, open the cover, remove the pressure cover and take out the clothes to dry.
5. Turn the spin basket clockwise and pull it out of the drum.

Note: Remove the basket when washing. The spin basket is only used to drain the clothes. The appliance does not dry the clothes.

Laundry holding plate
Switches
Spinning basket

WASHING RECOMMENDATIONS

Standard washing times

Load| Hardness level| Water quantity| Laundry| Washing time
---|---|---|---|---
3 kg| normal| Medium (18 L)
High (22 L)| Synthetic fibre| 4-6 min
Hemp, kapok| 5-8 min
Dirty laundry| 6-10 min
Bed sheets| 8-10 min
3 kg| soft| Medium (15 L)
High (20 L)| Thin synthetic fibre| 3-4- min
Synthetic fibre| 4-6 min
Hemp, kapok| 9-15 min

Amount of washing powder for a woollen pullover

Load| Water quantity|

Detergent type

---|---|---
Concentrate|

Normal

3 kg| High (24 l)|

6 ml

|

17 ml

2-2.5 kg| Medium (18 l)|

5 ml

|

14 ml

2 kg| Low (10 l)|

4.5 ml

|

12 ml

Washing powder

Dissolve the washing powder directly.

Add the washing powder directly when the water level is still low.
Turn the switch to the regular position.
Start the machine and keep stirring the water for 1 minute.
After the washing powder has dissolved, add water to the respective maximum level.
Select the correct wash load.

MAINTENANCE AND CLEANING

Pull the power plug out of the socket.
Drain the water completely.
Open the cover to allow the washing drum to dry. Remove the lint filter and clean it.
After you have drained the water from the washing drum, set the control from “Pump out” back to “Standard”.
Clean the fluff filter: Remove the lint filter and disassemble it by pressing the bottom from the inside. Clean the lint filter in warm water. Reassemble the outer screen after cleaning, set it back in place. Once it is seated properly, you will hear a click.
Disconnect the appliance from the water inlet and attach the drain hose to the appliance.
Rub down the casing. Use only mild cleaning agents for this. Close the cover and place the washing machine in a well-ventilated place. Disconnect the power cord from the socket before cleaning. Do not use harsh cleaning agents. Do not use steel brushes or abrasive cleaners.

Note: The electrical components of the appliance must not come into contact with water during maintenance. If the power cord is damaged, it must be replaced immediately by a specialist workshop authorised for this purpose.

DISPOSAL CONSIDERATIONS

If there is a legal regulation in your country regarding the disposal of electrical and electronic equipment, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of this product in accordance with the regulations, you protect the environment and the health of those around you from negative consequences. For information on recycling and disposal of this product, contact your local government or household waste disposal service.