FRANKE FHNE 604 3G TC Gas Hob User Manual

FRANKE FHNE 604 3G TC Gas Hob

Specifications

• Model Numbers: FHNE 604 3G TC, FHNE 755 4G TC, FHNE 805 4G TC, FHNE 805 4G TC FM, FHNE 1204 3G TC, FHNE 1204 3G TC FM, FHNE COR4 3G TC
• Country: UK
• Product Type: Gas Hob

Product Information

The Neptune Gas Hob is designed for non-professional, domestic use in households. It comes in various models with different features. Please refer to the user manual for specific details based on your model.

Facility

1. Installation Procedure: Follow the detailed installation instructions provided in the manual. Ensure compatibility with gas type and supply specified on the dataplate.
2. Intended Use: Use the device only for its intended purpose as specified in the manual.

Usage Instructions

1. Safety: Always read and follow the safety information provided in the manual. Keep children and pets away from the device during use.
2. Cleaning and Care: Regularly clean the appliance following the recommended cleaning instructions to maintain its performance.
3. Maintenance and Repair: Contact customer service for maintenance and repair needs to ensure safety and proper functioning of the appliance.
4. Disposal: Follow local regulations for proper disposal of the appliance when necessary.

FAQ

• Can children use this appliance?
  This appliance can be used by children aged 8 years and above under supervision. Children should not play with the appliance unsupervised.

• What should I do if the appliance becomes hot during use?
  Take caution to avoid touching the hot surfaces of the hob. Keep young children away from hot surfaces to prevent burns.

ABOUT THIS MANUAL

• This user manual applies to several models of the device. Thus it may be possible that some of the described features and functions are not available on your specific model.
• The explanatory images and figures, described in the various sections, are available at the end of the manual.
  • Carefully read the user manual before using the device.
  • Keep the user manual.
  • Use the device described in this user manual only according to the intended use.
• Franke reserves the right to make modifications to the product without prior notice.
• All information correct at time of issuance.

SAFETY INFORMATION

• In this manual and on your appliance we have provided many important safety messages. Always read and obey all safety messages.
• Franke reserves the right to make modifications to the product without prior notice. All information correct at time of issuance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.

Risk of injury!

• This device is not a toy.
• Keep children and pets away from the device and the packaging material e.g. plastic film and polystyrene; it can be dangerous, dispose of it in a proper way.
• Do not leave children near the device unattended.
• Do not let children play with the device.

Risk of burns!
During use the appliance becomes hot. Care should be taken to avoid touching the hob.
WARNING: Accessible parts may become hot during use. Young children should be kept away. Children less than 8 years of age shall be kept away unless continuously supervised.

• Ensure the gas type and supply is compatible with appliance specifications. The hob was developed exclusively for non-professional, domestic use in the household only.
• The type of gas for which the appliance is arranged is specified on the data plate on the bottom of the tray.
• Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.
• This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.
• The adjustment conditions for this appliance are stated on the label (or data plate).
• Pay particular attention to the applicable regulations on ventilation.
• After use, switch o° the hob by its controls.
• Make sure the burners are cold before closing the lid, if the appliance has one.

Risk of electric shock due to entering liquid!
The device contains electrical components.

• Make sure that no liquid enters the interior of the device.
• Do not use pressurised steam to clean the device.
• In the event of the burner flames accidentally extinguished, turn o° the burner control and do not attempt to reignite the burner for at least 1 min.
• The device shall not be operated for more than 15 seconds if after 15 seconds the burner has not lit, stop operating the device and open the compartment door and/or wait at least 1 minute before attempting a further ignition of the burner.
• Ensure that the device is installed in a way that allows to disconnect it from the power supply, with a contact opening distance (3˝mm) that ensures complete disconnection in category III overvoltage conditions.
• Ensure that the appliance is connected to an earthing system in compliance with the current regulations.

CAUTION: The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the room in which it is installed.

• Ensure that the kitchen is well ventilated especially when the appliance is in use: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
• Do not operate the appliance with an external time switch or a separate remote control system.

CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.

• Do not use steam cleaners or direct jets of water.
• Never use scouring pads, steel wool, muriatic acid or other products which could scratch or mark the surface.
• Never use sharp objects, as they could damage the seals between the trim and worktop.
• Ensure the gas outlet zones are perfectly clean.
• These instructions are only valid if the country symbol appears on the appliance. If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide the necessary instructions concerning modification of the appliance to the conditions of use of the country.

Risk of fire!
Do not store items on the cooking surfaces.
WARNING: Unattended or automatic cooking on a hob with fat or oil can be dangerous and may result in fire. Hot oil ignites readily.

TECHNICAL DATA

MODELS‘ CONFIGURATION

INSTALLATION

• Installation and electrical/gas connection must only be carried out by specialized and licensed personnel. The manufacturer declines any liability for injury to persons or damage to things due to failure noncompliance with these provisions.
• The gas connection must comply with the regulations in force in the country at the time of installation.
• Ensure that the device is connected directly to the mains socket. Ensure that no adapters, no multi-sockets and no extension cables are used to connect the device.

Cabinet requirements

• This handbook refers to a class 3 built-in gas hob and type Y for electric part.

• The gas pipe must not come into contact with the sides of any oven under the hob.

• For fitted units, the components (plastic materials and veneered wood) must be assembled with heat-resistant adhesives (min. 100°C). Unsuitable materials and adhesives can result in warping and detachment.

• The ventilation of rooms must be in compliance with local regulation.

• The kitchen element must allow sufficient room for the electrical connections of the appliance.
  Important: These devices are „Y“ type with respect to the degree of protection against the dangers of fire. The minimum distance from the edge appliance is 150 mm for the side wall, 50 mm for the rear and 700 mm for any cabinets above it. The appliance is recommended to be built into 40 mm thick worktops.
  In case the dimensions are different, eventual modifications have to be managed by the technician.
  Note: if a hood is installed above the hob, for the distance to be respected refer to the assembly instructions of the hood.

• If the appliance is not installed above an oven: arrange a separator baffle.

Installation procedure
The appliance is fixed to the unit by means of the brackets and accessories provided.

• Make sure that there is free access to the fixing elements in front and in the rear after the installation of the appliance.

• Prepare the hole in the worktop according to the dimensions indicated. Be sure to comply with the dimensions indicated.

• Flush fitting around top hole

Model FHNE COR 4 3G TC

• Apply the sealing strip around the hole and position the hob.
• Fix the appliance with the screws and brackets.
• Remove any excess sealing strip.

Connection to gas supply

• Connect the appliance to the gas supply in compliance with the current regulations, only after making sure it is arranged for the type of gas to be used. Otherwise, carry out the operations described in the paragraph „Replacing injectors“.
• For liquid gas use pressure regulators complying with the current regulations.

Connection to the gas supply can be made in two ways:

• Connect the gas hob using a 12 mm diameter rigid copper pipe (3). To ensure a good seal, use the elastomer gasket supplied as an accessory (1).

• Connect the hob using a continuous-surface flexible steel tube (2). Also in this case, to ensure a good seal use the gasket supplied as an accessory (1). The maximum length of the hose is 2 linear metres.
  Important: if a stainless steel hose is used, it must be installed so as not to touch any mobile part of the furniture. It must pass through an area where there are no obstructions and where it is possible to inspect it on all its length.

  • After connection to the gas supply light up the burners and turn the knobs from max position to minimum position to check flame stability.
  • After carrying out the connection use soapy water to check for any leaks.

• For United Kingdom, Northern Ireland and Republic of Ireland.

Electrical connection
The FRANKE cooking hob comes with a 3-core power cable with free terminals.

• Ensure the following:
  • The characteristics of your household electrical power supply (voltage, maximum output and current) are compatible with those of your FRANKE hob.
  • The plug and the socket can be easily reached and are positioned so that no live part is accessible when inserting or removing the plug.
  • A 3 x 0.75 mm2 H05RR-F type cable for completely gas hobs is used when replacing the power cable.
  • The terminals of two appliances are not connected to the same plug.
  • The polarities of the free terminals (Blue = Neutral = (1) /Yellow and Green = Earth =(2) / Brown = Live = (3)) are respected.

Adjustment to different types of gas
WARNING: This operation must be performed by a qualified technician.

Minimum flame adjustment

• Remove the knob.

• Adjust the minimum flame by turning the screw clockwise to decrease the flame and anticlockwise to increase it. The screwdriver for adjustment is supplied with the accessories.

  • Remove the grids, burner caps and flamespreaders;
  • Unscrew the injectors and replace them with those provided and suitable for the gas supply, making sure the marking matches that given in the table;
  • Refit the flame-spreaders, burner caps and grids.
    These burners do not require air adjustment.

Accessing the hob
To access the tray containing the functional parts, proceed as follows:

• Remove the grids, burner caps and flame-spreaders;
• Remove the knobs, sliding them off their pins;
• Remove the screws that fix the burners to the hob;
• Lift the hob.
  Important: When converting the appliance to a different type of gas, place the corresponding sticker (supplied as an accessory) in the special space on the data plate. For operation with LPG (G30 or G31), the minimum flame adjustment screw must be fully screwed down. These appliances are supplied in cat. II 2H3+.

INTENDED USE

CAUTION: This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

• Do not pull the appliance or the power cable to unplug it.

• Close the general gas supply cock when the hob is not in use.
  Risk of burns!

  • Do not touch the pot grids during use.
  • Do not touch the appliance with wet parts of the body.

Lighting the burners
The hob is lit with the control knobs. To light the burners, proceed as follows:

• Press and turn the required knob to the lighting and max delivery position.

• Keep the knob pressed down for 3-4 seconds to allow the sparks to ignite the gas coming out the burner and to allow the thermocouple to heat up.
  Then release the knob and, turning it anticlockwise, adjust the flame as required. If the flame does not stay lit, repeat the operation from step 1.

• **FHNE 604 3G TC, FHNE 755 4G TC, FHNE 805 4G TC, FHNE 805 4G TC FM, FHNE COR4 3G TC

**

• **FHNE 1204 3G TC, FHNE 1204 3G TC FM

**

• The hob is an item for daily use: signs of usage such as scratches or visible material abrasion from pots or cookware are normal. Intensive use leads to more distinctive signs of usage. In such cases, the appliance continues to function perfectly and a complaint is not justified. Safety is always guaranteed.
  Do not use the appliance as support top.

• To avoid damaging the appliance:

  • In the case of thermal failure, switch the solid plate off and allow to cool down completely.
  • Do not put any dishes on it. Do not cool with cold water under any circumstances.
  • Do not climb onto the appliance.
    The appliance is manufactured in compliance with the relevant effective safety standard an safety requirements of Gas Directive.

Automatic Safety Valve
These hobs have a safety device that automatically closes the gas flow if the flame accidentally goes out due to draughts, pot spilling, or a temporary interruption of the gas supply. This device is activated approx. 30 seconds after the flame goes out.

Burner use
For lower gas consumption and better efficiency use pots of widths suitable for the burners, making sure the flame does not go beyond the edges (comply with the following table):

The use of larger pots than those specified can cause excessive overheating of the knobs and top and, in case of prolonged use, yellowing of the cover (if in stainless steel). Franke declines any liability for damage due to such use (Fig. 1).

• Do not put the same pan on two burners (Fig. 1).
• Do not use two burners working at the same time with a single container, like a saucepan or a fish pan (Fig. 1).
• Improper use of the grids can damage the hob: do not position the grids upside down or slide them across the hob.
• In case of use of cast iron griddles, ollar stones, terracotta pots and pans, use them for no more than 20 minutes and, in case of prolonged cooking, adjust the burner to the minimum.
• Heat diffusers such as metal mesh, or any other types are not recommended.
  CAUTION: The use of particular pans or pots may cause a light temporary deformation of the steel cooking surface. This is normal and does not affect the operation of the appliance.

CLEANING AND CARE

Risk of burns!

• Do not clean the appliance and its accessories until they are cold.
• Do not use flammable liquids near the appliance. Before performing any cleaning and care:
• Turn the appliance off.
  Foods that accidentally fall or settle on the surface, on the functional or aesthetic elements of the hob must not be eaten.

Cleaning the appliance

• Clean the hob after every use in order to prevent food residues from burning on.
• To clean food residues, use a soft cloth or sponge with water. We recommend using protective cleaning agents.
• Immediately remove any foods with high sugar content that spill onto the hob.
• To prevent limescale stains from forming, always thoroughly dry the appliance after going over it with a damp cloth.
• Clean the grids, burner caps and flame-spreaders with hot soapy water, making sure to carefully dry them. Do not clean in a dishwasher. Make sure the gas outlet zones are perfectly clean.
• The natural colour of the pot grids in the pot placing section may alter over time due to the heat.

MAINTENANCE AND REPAIR

Before any maintenance operations disconnect the appliance from the mains power supply. In case of any operation problems, contact the Franke Technical Service Centre.

• Make sure that maintenance on electrical components is carried out only by the manufacturer or the customer service. Use original spare parts only.

• Make sure that damaged cables are changed only by the manufacturer or the customer service.

• When contacting the customer service, please provide the following information:

  • type of fault
  • appliance model (Art. / Cod.)
  • serial number (S.N.)
    This information is given on the data plate on the booklet or under the hob.

• If the hob doesn‘t operate correctly, before calling the Franke Technical Service Centre, refer to the Troubleshooting Guide to determine the problem:

DISPOSAL

Packaging
All packaging materials (cardboard, plastic film (PE) and polystyrene (EPS)) are marked and should, if possible, be collected for recycling and disposed of in an environmentally friendly way.

Disconnection
Disconnect the appliance from the mains. With a fixed appliance, this must be carried out by a qualified electrician.

Disposal
The symbol on the product or on the packaging indicates that the device must not be disposed of in the domestic waste.

• Dispose of the device, which is to be discarded, via a specialised waste collection point for electronic and electrical devices.
• In accordance with the Directive 2012/19/EU, regarding the reduction of the hazardous substances used in electrical and electronic appliances, and waste disposal.
• Proper separate waste collection of the scrapped appliance for subsequent recycling, treatment and environmentally-friendly disposal helps prevent a potentially negative impact on the environment and health and facilitates recycling of the materials usedin appliance construction.

CUSTOMER SERVICE

Refer to the contact address for your country on the back page or on our website: www.franke.com

References

• Home
• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>