kogan com KAWLCGIWATA MFI Apple Watch Wireless Charger User Guide
- June 15, 2024
- Kogan com
Table of Contents
kogan com KAWLCGIWATA MFI Apple Watch Wireless Charger
Product Information
Specifications:
- Product Name: MFI Apple Watch Wireless Charger (with Silicone Stand)
- Model: KAWLCGIWATA
- Components: Watch Charger, Silicone Stand, User Guide
- Power Input: 5V/1A
- Power Output: 5V/1A PD 3.0
- Physical Specifications: Main body – 35(L) x 35(W) x 12(H)mm
- Environmental Conditions:
- Temperature: Not specified
- Humidity: Not specified
Product Usage Instructions
Operation:
- Connect the Charger to a USB-C 5V/1A power adaptor or USB-C port in a computer.
- Place your Apple Watch on the charging base to begin charging.
- For added stability, you can place the charging base into the silicone stand.
-
Cleaning & Care:
Wipe the surface with a soft, clean cloth. Do not use solvents, benzene alcohol, or harsh detergents. -
Energy Consumption:
When the adapter is in the standby state, it is still consuming electricity. When not in use, it is recommended to remove the USB-C connector from the power supply. -
Avoid Heat, Damp, Water, and Dust:
Do not expose the charger to water, rain, sand, dirt, direct sunlight, or extreme temperature environments. When the charger is suddenly moved from a cold to a warm environment, some condensation may occur. Dry the charger thoroughly before connecting it to a power supply or placing the watch onto it.
Don’t Obstruct Ventilation:
Don’t operate the charger inside a closed box or cabinet. Ensure there is at
least 10cm of clearance to allow for adequate ventilation.
FAQ:
- Q: Where can I find more information about the product?
A: For the most up-to-date guide for your product and any additional assistance you may require, head online to help.kogan.com.
COMPONENTS
- Watch Charger
- Silicon stand
- User Guide
OVERVIEW
OPERATION
- Connect the Charger to a USB-C 5V/1A power adaptor or USB-C port in a computer.
- Place your Apple Watch on the charging base to begin charging.
- For added stability, you can place the charging base into the silicone stand.
CLEANING & CARE
Wipe the surface with a soft, clean cloth. Do not use solvents, benzene alcohol, or harsh detergents.
-
Energy consumption
When the adapter is in the standby state, it is still consuming electricity. When not in use it is recommended to remove the USB-C connector from the power supply. -
Avoid heat, dampness, water, and dust
- Do not expose the charger to water, rain, sand, dirt, direct sunlight, or extreme temperature environments.
- When the charger is suddenly moved from a cold to a warm environment, some condensation may occur. Dry the charger thoroughly before connecting it to a power supply or placing the watch onto it.
-
Don’t obstruct ventilation
Don`t operate the charger inside a closed box or cabinet. Ensure there is 10cm of clearance to allow for adequate ventilation.
SPECIFICATIONS
Technical Specification
Watch Magnetic Charging
| 5V/1A for Apple Watch
Support Over Current Protection Support Over Voltage Protection
Power Input| 5V/1A PD 3.0
Power Output| 5V/1A
Physical Specifications
Dimensions| Main body: 35(L) x 35(W) x 12(H)mm
Environmental Conditions
Temperature
| Operating Temperature：0°C – 40°C
Storage Temperature：-20°C – 80°C
Humidity
| Operating Humidity：10% – 70% RH
Storage Humidity：10% – 80% RH
Need more information
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.