kogan com KASTTVPB55A Portable TV Mount Stand Cart User Guide
- June 15, 2024
- Kogan com
Table of Contents
kogan com KASTTVPB55A Portable TV Mount Stand Cart
Product Information
The Portable TV Mount Stand Cart is a versatile and sturdy stand designed to hold TVs ranging from 32 to 55 inches. With its durable construction and adjustable features, it provides a convenient solution for displaying your TV in various locations.
Specifications
- VESA compatibility: 100×100, 200×100, 200×200, 300×200, 300×300, 400×200, 400×300, 400×400
- Weight limit for shelf: 5 kg
Components
The following components are included in the package:
- Stand assembly: A, B, C, E, F, D, G, H, I, J, K, L, M, N, O, Q M6x35 (x4), R M6x50 (x4), S (x8), T (x1), P M6x16 (x11), U (x1)
- Adapters (Depends on TV): M-A M5x14 (x4), M-B M6x14 (x4), M-C M6x30 (x4), M-D M8x30 (x4), M-E M8x50 (x4), M-F (x4), M-G (x8), M-H (x8)
Product Usage Instructions
Step 1: Assembling the base
- Attach the cross-beam (C) to the two base beams (B) using the Allen key (T).
- Tighten the M6x16mm (P) and M6x35mm (Q) screws to secure the cross-beam in place.
- If the casters cannot touch the ground, adjust the caster position by loosening the nut and then tightening it after adjustment.
- Install the locking caster wheels (J) and tighten them with the spanner (U).
- Clamp the locks down to ensure the stand does not move during assembly.
- Place the joint left and right joint covers (K, L) into position.
Step 2: Attaching the stand
- Place the stand (A) and joint cover (I) onto the cross-beam.
- Secure them with x4 washers (Q) and M6x50mm screws (N) using the Allen key (S).
- To adjust the height, pull the safety spring lock outwards while pulling the column upward. Ensure that the spring lock aligns with the keyhole to prevent sudden drops.
- Never go beyond the MAX line marking on the column, which indicates the highest position.
Step 3: Inserting the supporting screw
- Insert the supporting M6x16mm screw (P) into the extended stand and tighten it with the Allen key.
- Insert the hole covers (N, M) in place.
Step 4: Attaching the mounting plate
- Attach the mounting plate (D) to the front of the stand.
- Secure it with x4 washers (S) and M6x16mm screws (P) using the Allen key.
Step 5: Attaching the shelf
- Attach the shelf (G) to the stand.
- Secure it to the shelf mount (H) with M6x16mm screws (P).
- Ensure that the weight limit of 5 kg is not exceeded.
Step 6: Attaching the mounting brackets
- Attach the mounting brackets to your TV.
- Use the appropriate combination of spacers (M-G, M-H) to create the correct amount of space for the brackets.
- Make sure the screws are fitted correctly into your TV’s VESA mount holes and are of the appropriate length.
- Use the M-F adapter for small screws (M-A, M-B) or large screws (M-C, M-D, M-E) depending on its orientation.
Step 7: Mounting the TV
- Ensure that the locking caster wheels (J) are locked before attempting to mount the TV.
- With the help of another person, lift the TV and position it above the mounting plate.
- Gently lower the TV into place, ensuring it is evenly positioned in the middle of the stand.
- Secure the brackets to the bottom of the mount using the vertical screws.
FAQ
-
Q: What is the weight limit for the shelf?
The weight limit for the shelf is 5 kg. Do not exceed this limit to ensure the stability of the stand. -
Q: Can I adjust the height of the stand?
Yes, you can adjust the height of the stand by pulling the safety spring lock outwards while pulling the column upward. Ensure that the spring lock aligns with the keyhole for proper adjustment. -
Q: What TVs are compatible with this stand?
This stand is compatible with TVs ranging from 32 to 55 inches. Ensure that your TV’s VESA mount holes match the provided compatibility specifications. -
Q: Can I use the shelf for other devices?
Yes, the shelf is suitable for use with laptops, DVD and Blu-ray players, hard drives, gaming consoles, or any other devices as long as the weight limit of 5 kg is not exceeded.
SAFETY & WARNINGS
CAUTION: Rated weight for the TV stand is 33kg (77 lbs). The rated weight for the storage shelf is 5kg (11 lbs). Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and quality tools must be used.
- When in use, make sure the stand is on a flat level surface and the caster wheels are locked.
- Do not allow children to play near this stand.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- A minimum of two people are recommended for this installation. Failure to use safety gear and safe working methods may result in property damage, serious injury or death.
IMPORTANT: Ensure that you have received all parts according to the
component checklist prior to installation. If any parts are missing or faulty,
contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular
intervals (at least every three months).
VESA compatibility: 100×100, 200×100, 200×200, 300×200, 300×300, 400×200, 400×300, 400×400
COMPONENTS
Stand assembly:
Adapters (Depends on TV):
ASSEMBLY
Step 1: Assembling the base
Attach the cross-beam (C) to the two base beams (B), using the Allen key (T)
to tighten the M6x16mm (P) and M6x35mm (Q) screws in place as shown below
.
After the cross-beam is secured, attach the locking caster wheels (J), using the spanner (U) to tighten. Once the casters are installed, clamp the locks down to ensure the stand does not move suddenly during the remainder of the assembly. Place the joint left and right joint covers (K, L) into position as shown below.
Step 2: Attaching the stand
Place the stand (A) and joint cover (I) into position on the cross-beam,
securing it with x4 washers (Q) and M6x50mm screws (N). Use the Allen key (S)
to tighten.
Step 3:
Insert the supporting M6x16mm screw (P) into the extended stand, tightening it
with the Allen key. Insert the hole covers (N, M) in place.
Step 4:
Attach the mounting plate (D) to the front of the stand, securing it with x4
washers (S) and M6x16mm screws (P), using the Allen key to tighten.
Step 5:
Attach the shelf (G) to the stand, securing it to the shelf mount (H) with
M6x16mm screws (P). The shelf is suitable for use with laptops, DVD and Blu-
ray players, hard drives, gaming consoles, or anything else as long as the
weight limit (5 kg) is not exceeded.
Step 6:
Attach the mounting brackets to your TV. Depending on your TV, a combination
of spacers (M-G, M-H) may be required to help create the correct amount of
space for the brackets. Ensure the screws are fitted correctly into your TV’s
VESA mount holes, and are not too long or too short in the back of the TV.
Also note that the M-F adapter is used for both small screws (M-A, M-B) and
large screws (M-C, M-D, M-E) depending on its orientation.
Step 7:
Note: Ensure the locking caster wheels (J) are locked before attempting
to mount the TV.
With two people, lift the TV up and above the mounting plate and gently lower
down into place, ensuring the TV is evenly positioned in the middle of the
stand. The brackets each feature a vertical screw to secure to the bottom of
the mount. Hook this screw underneath the mount and tighten to secure.
A minimum of two people are recommended for this installation. Failure to use safety gear and safe working methods may result in property damage, serious injury, or death.
OPERATION
Cable Management:
The stand features built-in cable management functionality, as per the below
image:
Tilting:
CAUTION: Loosen the knobs as shown and adjust the display to the desired angle, then tighten the knobs.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com.