kogan com KAMN15CPA 15.6 Inch FHD IPS USB-C Portable Monitor User Guide

kogan com KAMN15CPA 15.6 Inch FHD IPS USB-C Portable Monitor

COMPONENTS

• Portable monitor

• USB-C to USB-C cable

• USB-C to USB-A cable

• Mini HDMI to HDMI cable

• Power adapter

• Cover case

• User guide

OVERVIEW

A 3.5mm headphone port
B Power button
C Function selection button
D Power port
E Mini HDMI port
F Secondary USB-C port
G Primary USB-C port

Ports Introduction

transmit audio, image at same time.
Mini HDMI port| Transmit audio and image only.
3.5mm headphone port| Connect to speakers and headphones.

USING COVER CASE

The cover case is attached to the monitor via two small screws. It has a built-in magnet and sits in place over the screen when used as a cover and can also be folded back to use as an upright stand.

Backside (with one line)

The monitor comes with the cover case already attached, but can be removed or reattached with the screws.

Fold the LED side of the cover case over the LED display.

By using the cover case as a stand, the main unit can be used at an angle as shown below:
ٖٖٖFallow the path of the arrow shown here to position the cover case \ as an upright stand.

CONNECTIVITY

Computer (Via USB-C)

This portable monitor can be connected to a compatible computer using the supplied USBC cable. This must be connected to the primary USB-C port on the right side of the monitor.
The computer will provide power and signal to the monitor and can be used to mirror or extend the computer screen.

Note :

When connecting the portable monitor and computer via USB-C, the brightness of the monitor will automatically be set to low when connected to a computer that supports reverse power supply.
It is recommended to use a power adopter with this portable monitor to achieve optimal brightness and extended usage duration.

Mobile Phone (Via USB-C)

1. Connect the supplied power adapter to the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
2. Connect one end of the supplied USB-C to USB-C cable to the primary USB-C port on the right side of the monitor, and the other end to the mobile phone or tablet.
   

Note:
When connecting the portable monitor and mobile phone via USB-C, the brightness of the monitor will automatically be set to low when connected to a mobile phone that supports reverse power supply.
It is recommended to use a power adapter with this portable monitor to achieve optimal brightness and extended usage duration.

Computer (Via HDMI & Power Adapter)

1. Connect the supplied power adapter to the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
2. Connect the HDMI end of the supplied mini HDMI to HDMI cable to the computer and the other end to the mini HDMI port on the right side of the portable monitor.
   

Note:

The power adopter is always required when the monitor is connected via a mini- HDMI to HDMI cable.

Other Devices (Via HDMI & USB-A to USB-C)

1. Connect the supplied power adapter ta the power port on the left side of the monitor and plug the power adapter into an electrical outlet.
2. Connect the HDMI end of the supplied mini HDMI to HDMI coble to the device and the other end to the mini HDMI port on the right side of t he portable monitor.
3. Powering the monitor using the device (optional): Connect the USB-C end of the provided USB-C to USB-A coble to the primary USB port on the right side of the portable monitor. Then, connect the USB-A end to the device.
   Note: When using this configuration, the power adapter is not required.
   

Note:

The power adopter is always required when the monitor is connected via a mini HDMI to HDMI cable.

OPERATION

Turn the Monitor On/Off

• Press the power button to turn the portable monitor on.
• Press and hold the power button for 3 seconds to turn the portable monitor off.

On-Screen Display (O5D)

• Press the function selection button to enter the OSD menu.
• Roll the function selection button upward or downward to navigate the OSD menu and press it to confirm the selection.
• Press the power button to return to the previous menu.

Adjust The Brightness

1. On the main menu, roll the function selection button upward to enter the brightness menu.
2. Roll the function selection button upward or downward to adjust the brightness.
3. Press the function selection button to confirm the selection.

Adjust The Volume

1. On the main menu, roll the function selection button downward to enter the volume menu.
2. Roll the function selection button upward or downward to adjust the volume.
3. Press the function selection button to confirm the selection.

Compatible Computers

Compatible Mobile Devices

Huawei| Mate10, Mate10Pro, Mate20, Mate20Pro, Mate20X, P20, P20Pro, HonorNote10
---|---
Samsung| SB, SB+, S9, Note8, Note9
Smartisan| R1, Pro2S
OPPO| R17 Pro

Note:

This list of compatible devices is not comprehensive and intended only as a guide.
Always refer to the device’s user manual to ensure it is compatible with an external display.

SPECIFICATIONS

USB-C video output capability

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>