kogan com KASPS30WACA Smarterhome Smart Power Board User Guide
- June 15, 2024
- Kogan com
Table of Contents
KOGAN SMARTERHOME™
SMART POWER BOARD
4 USB PORTS 30W PD CHARGING)
KASPS30WACA
USER GUIDE
SAFETY & WARNINGS
- Indoor use only.
- Always use the socket in a dry place. Do not use in a bathrooms or other locations where it will be exposed to water or high humidity.
- Ensure the smart socket is not overloaded, working power cannot be higher than the rated current. Refer to the power rating in the “Specification” section.
OVERVIEW
- Circuit breaker
- AC outlet (x4)
- Manual control button
- USB-A 30W fast charging
- USB-C 30W fast charging
- Indicator for USB
- USB-A & USB-C (5V 2.4A each)
- Power cord
CONNECT TO SMARTERHOME™ APP
Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App
Store (iOS).
https://play.google.com/store/apps/details?id=com.kogan.smarterhome|
https://apps.apple.com/au/app/kogan-smarter-home/id1394930704
---|---
To register:
- If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
- The system will automatically recognise your country. If needed, you can manually select your country from the drop-down box. Enter your email address and tap ‘Get Verification Code’ to continue.
- A 6-digit code will be sent to the submitted email address. Enter this code before the one-minute timer expires.
- Continue to the next page and complete your SmarterHome profile.
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode
(indicator light rapidly flashing). If not automatically in pairing mode when
powered on, you can manually set the device in pairing mode by first
unplugging the device from the power supply.
Reconnect the power board back to electrical outlet and hold the button for
5-10 seconds until the indicator light is flashing rapidly.
Add device through network
-
Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper right corner, to add a new device through the network.
-
Select the product type from the list of options in the app (Electrical > Power Strips).
-
Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order. -
Ensure that the device is in pairing mode, with the indicator flashing rapidly, and tap “Confirm light is rapidly flashing”.
-
The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
-
After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.
Note:
Once connected, you can select Create Scene from the “+” in the upper right
corner (or from the Scene tab) to group connected SmarterHome™ products and
automate their functions.
GOOGLE HOME CONTROL
Note:
You will need to have set up a Google Home account prior to linking your Kogan
SmarterHome™ device.
Adding “SmarterHome” to the Google Home app
-
From the home page of the Google Home app, select the “+” icon (top left corner, see arrow in the below screenshot) to access the ‘Add and manage’ page.
-
Select ‘Set up device’, then select the ‘Works with Google’ option.
-
Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
-
From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
-
Select “Kogan SmarterHome™” from the app options.
-
Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices.
-
Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines. Tap on any of the devices to view a list of available commands.
Note:
Please note that Google Home can only control the base/core functions of any
compatible SmarterHome™ devices. To make full use of this product’s smart
functionality, please use the Kogan SmarterHome™ app.
AMAZON ALEXA CONTROL
Note:
You will need to have set up an Alexa account prior to linking your Kogan
SmarterHome™ device.
Adding “SmarterHome” to the Alexa app
-
From the home page of the Alexa app, select the “ ” icon in the bottom-right and select “Skills & Games” from the sidebar.
-
Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ skill.
-
Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
-
From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
-
Select “Kogan SmarterHome™” from the app options.
-
Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and your devices.
-
Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands.
Note:
Please note that Alexa can only control the base/core functions of any
compatible SmarterHome™ devices. To make full use of this product’s smart
functionality, please use the Kogan SmarterHome™ app.
SPECIFICATIONS
| Power rating | 240VAC, 50/60Hz 10A |
|---|---|
| 4 USB | 2 x USB-A & 2 x USB-C |
Refer to the “Overview” section to identify the two
30W PD fast charging USB ports.
1 x USB-A and 1 x USB-C| 5V 2.4A Each (Total output: 5V 2.4A)
Total power| 30W Max.
Wi-Fi standard| 802.11 b/g/n
Radio frequency| ISM BAND, 2.412-2.484GHz
Security| Mac Encryption; WEP/WAPI/TKIP/AES
Operation temperature| -20°C ~ 50°C
Rated maximum ambient temperature (ta) is 50°C.
The maximum height above sea level is 2000m
The equipment is general purpose switching power supply and intended for use
with information technology equipment.
FAQ
Q. How do I remove devices from the app?
A. From the home screen, click the “…” button in top right corner and select “Device Management”. Select the device(s) you wish delete and then click “Remove Device” on the bottom of the screen.
Q. I cannot connect the device with our App.
A. Unplug the device from the power supply. Plug it in again and hold the button for 5-10 seconds until the indicator is flashing rapidly.
Q. I cannot link my device to Google Home or Amazon Alexa.
A. Remove the device and follow the steps in this user guide to reconnect it to the app.
Q. What devices can I control with the Smart socket?
A. You can control light, fans, humidifiers, portable heaters and any small home appliances.
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com 
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>