meross MSS110(US) Smart Plug 4 Pack User Manual

meross MSS110(US) Smart Plug 4 Pack

Safety Information

• It is recommended that this device is used indoors in a dry location only.
• The device shall be used within its rated power included in the product specifications on the package.
• Make sure the device is fully plugged in and kept out of reach of children for safety concern.

Package Contents

• 1 x Smart Plug
• 1 x User Manual

LED and Button Rules

1. Power Button
   • Press the button to turn the smart plug ON or OFF.
   • To factory reset the smart plug, press and hold the button for 5 seconds until the LED flashes between amber and green.
2. Status LED
   • Solid amber: Initializing/ Firmware upgrading
   • Rapidly flashing green: Wi-Fi connecting
   • Slowly alternating between amber and green: Ready to pair
   • Solid green: Connected to home Wi-Fi/ Successfully paired
   • Solid red: No internet connection
   • OFF: Your receptacle is not powered on/ The smart plug is not turned on.

Installation Guide

1. Make sure your smart device is powered on and covered by strong Wi-Fi signal.
2. Download the Meross app. (P4)
3. Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.
4. Tap the “+” icon, Meross app will find nearby smart device automatically. Click “Add” and follow the setup wizard to finish configuration.(P5)
5. Relocation of the smart device does not require additional operations provided that it is on the same network with strong Wi-Fi signal.

NOTE:

1. This smart device needs to be set up via Bluetooth(Bluetooth 4.0 or later). Please make sure Meross app is granted to access required system permissions and the Bluetooth of your smart phone has been enabled.
2. If this is not the first time you’ve added this smart device, you’ll have to reset it before going any further.
3. Find more at https://www.meross.com/support/.

Link to Google Assistant or Amazon Alexa

• Set up the device in the Meross app first, then link it to voice assistants.

Link to Amazon Alexa

• Go to User-> Amazon Alexa and allow Meross to link with Alexa.

Link to Google Assistant

• Go to User-> Google Assistant and allow Meross to link with Google Assistant.

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non- exhaustive list of questions that users are mostly concerned about.

1. What devices can I control with Meross smart plug?
   • You can control lights, fans, humidifiers, portable heaters, and other small appliances that are in conformity with the specifications of the smart plug (up to 15A output).
2. What should I do when the LED turns solid red?
   • You can troubleshoot the following:
   • Check if your home Wi-Fi is working properly.
   • Make sure that you have disabled access control in your router and that the smart plug is not blocked by the router’s firmware.
   • Factory reset your Meross smart plug and try to add it again.

Warranty

• Meross products are covered by a 12-month limited warranty from the date of purchase.
• Please visit https://www.meross.com/support/warranty. for detailed warranty policy and product registration.

Disclaimer

1. The function of this smart device is tested under a typical circumstance described in our specifications. Meross does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
2. By using third-party services including but not limitted to Amazon Alexa, Google Assistant, Apple HomeKit and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what is expressly covered in its Privacy Policy.
3. Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross aftersales service, nor does Meross take any legal responsibility therefrom.

Customers acknowledge understanding of these articles clearly by reading this manual.

FCC Statement

FCC Compliance Information Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against hart-nful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/re- ceiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation Of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 Of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance Of 20 centimeters between the radiator and your body.

CONTACT

• SIMPLE DEVICE
• SIMPLIFY YOUR LIFE
• Email: support@meross.com.
• Website: www.meross.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>