cudy AX3000 Wi-Fi 6 Mesh Router Installation Guide
- June 15, 2024
- cudy
Table of Contents
Quick Installation Guide
AX3000 Wi-Fi 6 Mesh Router
If your internet source is an Ethernet cable coming from the wall directly
instead of a DSL/Cable/Satellite modem, connect the Ethernet cable to the
router’s WAN port and skip steps 1, 2 ,3. 
- Turn off the modem and remove the battery if it has one.
- Connect router’s WAN Port to DSL/Cable/Satellite Modem.
- Turn on the modem and then wait about 2 minutes for it to restart.
- Connect the power adapter to the router and wait 1 minute until the system LED changes from flashing to solid on (red or blue) , which means the system startup is completed.
- Connect your computer to the router (Wired or Wireless).
Wired
Turn off the Wi-Fi on your computer and connect it to router’s LAN port via an Ethernet cable.
Wireless
Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router.
- Launch a web browser, and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for password to log in.
- The window below will pop up, please follow the step-by-step instructions to set up the internet connection.
- Launch a web browser, and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for password to log in.
LED and Button
| Name | Status | Indication |
|---|---|---|
| OFF | Not powered on | |
| Flashing | System start-up process | |
| ON | System startup complete | |
| OFF | Not connected to the Internet | |
| ON | Connected to the Internet | |
| OFF | No connection at WAN port | |
| ON | WAN port has connection | |
| OFF | LAN port is not connected | |
| ON | LAN port is connected | |
| Off | 2.4GHz Wi-Fi off | |
| Flashing | WPS in process | |
| ON | 2.4GHz Wi-Fi On | |
| Off | 5GHz Wi-Fi off | |
| Flashing | WPS in progress | |
| ON | 5GHz Wi-Fi On | |
| Button | WPS | Press and hold 1 second to enable the WPS function. |
| Reset | Press and hold 2 seconds to reset the router to its factory default |
settings.
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU, directive 2011/65/EU, directive (EU) 2015/863. The original EU declaration of conformity can be found at http://www.cudy.com/ce.
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU), this product must not be disposed of as normal
household waste.
Instead, they should be returned to the place of purchase or taken to a public
collection point for recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more information, please
contact your local authority or the nearest collection point. Improper
disposal of this type of waste may result in penalties according to national
regulations.
FCC Statements:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
GNU General Public License Notice
The software code in this product was created by third parties and is licensed
under the GNU General Public License (“GPL”). If applicable, Cudy (“Cudy” in
this context refers to the Cudy entity offering respective software for
download or being in charge of the distribution of products that contain
respective code) makes the corresponding GPL source code available upon
request via the official website, either independently or with the assistance
of third parties (such as Shenzhen Cudy Technology Co., Ltd.).
For GPL-related questions, email support@cudy.com.
In addition, Cudy offers a GPL-Code-Centre under
https://www.cudy.com/gplcodecenterdownload where users can get the GPL
source codes used in Cudy products for free. Please note, that the GPL-Code-
Centre is only provided as a courtesy to Cudy’s customers but may neither
offer a full set of source codes used in all products nor always provide the
latest or actual version of such source codes.
The GPL code used in this product is subject to the copyrights of one or more
authors and is supplied WITHOUT ANY WARRANTY.
NEED TECH HELP?
Website:
www.cudy.com
Email:
support@cudy.com
Driver & Manual:
www.cudy.com/download
Support
For technical support, the user guide and more information, please visit:
https://www.cudy.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>