mti 93 Designer Collection Tubs Instruction Manual

mti 93 Designer Collection Tubs

Specifications

• Model: 93
• Dimensions: 71.5″ x 35.75″ x 20.25″
• Installation: DROP-IN or undermount
• Water Capacity: 100 gallons to overflow
• Weight: 110 lbs / 50 kg, 124 lbs / 56 kg, 135 lbs / 61 kg, 152
  lbs / 69 kg (depending on configuration)

Product Usage Instructions

Installation

To install the Designer Collection Tub, follow these steps:

1. Choose whether you want to install the tub as a DROP-IN or UNDERMOUNT.
2. Ensure that the tub is properly supported and level.
3. If installing optional integral armrests, attach them to the tub.

Optional Fixtures

The numbered areas on the tub deck represent possible locations to install cleaning systems, faucets, and other fixtures. You can customize your tub by adding Air Massage, Ultra Whirlpool Package, or other optional features according to your preferences.

Note: The pump and/or blower may extend out 2″ beyond the tub deck.

Electrical Requirements

The electrical requirements for the tub may vary depending on the selected hydrotherapy package. Please refer to the specific option details or installation information for accurate electrical requirements.

Product Overview

model 93

71.5″ x 35.75″ x 20.25″
DROP-IN or undermount

100 gal to overflow

Acrylic CXL®| DoloMatte®
110 lbs / 50 kg       124 lbs / 56 kg

135 lbs / 61 kg      152 lbs / 69 kg

Filling this tub to the maximum may require an above-average size or dedicated water heater.

IMPORTANT ORDERING & INSTALLATION INFORMATION

• Before ordering or installing, please consider future access to equipment.
• Add proper bedding compound to fully level and support the bottom of the tub.
• When equipped with an air bath package, pre-leveled foam base, or frame system, overall tub height is increased by approx. 2-3” and is designed to be installed on a flat, level subfloor.
• Radiance placed on air bath floor will affect the placement of air jets.
• System components may extend beyond the perimeter of the deck.
• Please measure tub on-site before building tub decking.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
• Suction and control locations may vary.
• All tubs are compliant with ASTM C 1028-07 coefficient of friction. DoloMatte meets ANSI A137.1/A326.3 coefficient of friction and AS HB198:2014 slip tests.

ELECTRICAL COMPONENTS & SPECIFICATIONS

Electrical requirements may change with the addition of optional therapy components. See specific option details or installation information.

CSA Certified C/US; B45.5/IAPMO ANSI Z124.1 and ANSI 112.19.7

amp
Air Elite with Ultra Whirlpool| 2-bhp pump, inline heater, heated blower, chromotherapy, ozone| 2-20 amp

See the Installation & Operation Manual for more details. MTI’s Customer Service Monday-Friday 8 am-6 pm EST 800-783-8827 or service@mtibaths.com

• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to the publication date below.
• Aromatherapy is eliminated for undermount applications
• Air Baths, Pre-Leveled Foam Base or Frame Systems increase overall height by 2-3″.

RECOMMENDED SENSORY THERAPIES

Chromatherapy

• (LE) $800 underwater lighting
• 2 LED lights included

Audiotherapy

• (STEREOBT) $1,390 2 transducers with Bluetooth and amplifier
• (BTREMOTE) $600 Bluetooth remote

(STEREOH202) $1,575 4 transducers amplifier not included

Thermotherapy

• (RAD100) $1,595 Radiance®
• 2 heated zones included
• (HTISOAK) $825

Installation Options Must be ordered at the time of purchase.

• Pre-Leveled Foam Base (PLFOAM) $295 All air baths include a pre-leveled foam base.
• Pre-Leveled Frame and Foam Base (PLF) $740
• Pre-Leveled Frame and Foam Base with Skirting (Acrylic CXL® tubs only) For pricing and details go to mtibaths.com

Tile Flange

• Factory-Installed on 3 sides – rigid ABS (TFK3) $200
• Field Install Kit – includes rigid ABS & adhesive (TFKNI) $185

IMPORTANT: Must specify flange location(s) on the order of Factory- Installed Flange. Not available with optional Low-Profile Rim.

Drains & Overflow Kits

Cable Driven

Drain Finishes – PVC Drain Kit

• White/Biscuit (WOCDW) $440
• Chrome (WOCD) $410
• Brushed Nickel (WOCDBN) $490
• polished Nickel (WOCDPN) $540 Oil-Rubbed Bronze† (WOCDOR) $550
• Polished Brass (WOCDBR) $690
• Special Finishes* (WOCDSF) $1,135

Toe Tap

Round Overflow – PVC Drain Kit

• Chrome (WOTTC) $380
• Brushed Nickel (WOTTBN) $385
• polished Nickel (WOTTPN) $385
• Special Finishes* (WOTTSF) $1,145

Round Overflow – Solid Brass Drain

• Chrome (WOTTSBC) $810
• Brushed Nickel (WOTTSBBN) $810
• polished Nickel (WOTTSBPN) $810

Toe Tap

Rectangular Overflow – PVC Drain Kit

• Chrome (WOTRC) $470
• Brushed Nickel (WOTRBN) $430
• White (WOTRW) $525

Lift & Turn

Drain Finishes – PVC Drain Kit

• Chrome (WOC) $185
• White (WOW) $245
• Brushed Nickel (WOBN) $305

Slim-Line Overflow with Toe Tap Drain Must be ordered at the time of purchase.

• Low profile overflow is factory-installed
• Overflow measures 4.5” x 1”
• Provides a deeper soak
• Not available for commercial applications

Slim-Line Overflow with Toe Tap Drain PVC Drain

• Chrome (SLOTC) $500
• Brushed Nickel (SLOTBN) $530
• Polished Nickel (SLOTPN) $555
• White (SLOTW) $430

Slim-Line Overflow with Toe Tap Drain

Solid Brass Drain

• Chrome (SLOTSBC) $930
• Brushed Nickel (SLOTSBBN) $935
• Polished Nickel (SLOTSBPN) $935
• White (SLOTSBW) $965

MTI has selected an oil-rubbed bronze finish that is compatible with Delta and many other manufacturers.  To ensure the best match, order as a Special Finish and submit a sample.

For more information on options and accessories go to Acrylic Tub Options at mtibaths.com

References

• MTI Baths | Luxury Bathtubs, Counter-Sinks, Vanity Sinks & Shower Bases

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>