mti MBIS6036 Soaking Heated Whirlpool and Air Bathtub Instructions
- June 9, 2024
- MTI
Table of Contents
mti MBIS6036 Soaking Heated Whirlpool and Air Bathtub
INTRODUCTION
- Model: MBIS6036
- 59.875” x 36” x 20”
- Installation: Alcove
- Material: Acrylic
- Plumbed Weight: 135 lbs / 61 kg
- Soaker Weight: 115 lbs / 52 kg
- Average Fill: 31 gal to above jet level
- Maximum Fill: 61 gal to overflow
Package Content
Package Content Part #
Soaker
| Soaking bath – No jets. Integral front skirt, 3-sided integral tile flange and textured bottom.| MBSIS6036
Air Bath
| 12 air jets, heated air blower, pre-leveled foam base, textured bottom, integral front skirt and 3-sided tile flange. pre-leveled foam base increases overall tub height 2”-3”|
MBAIS6036
Whirlpool
| 6 point-massage jets, 1-bhp pump, integral front skirt, 3-sided integral tile flange and textured bottom.|
MBWIS6036
DIMENSION
Shown with Whirlpool Package
Important Ordering and Installation Information
- Before ordering or installing, consider access to equipment.
- Must specify left- or right-hand drain when ordering.
- Tubs equipped with hydrotherapy components have a removable front panel.
- Use proper bedding compound to fully level and support the tub.
- Tubs equipped with an air system or factory installed pre-leveled foam base are designed to install directly onto a flat level subfloor.
- Location of all therapy components is predetermined and cannot be changed.
- Suction and control locations may vary.
- Options listed cannot be combined with Designer Collection options.
- Before discarding tub crate, check for accessories that may be packaged inside.
- All product measurements are +1/2”.
- Specifications and configurations are subject to change without notice.
- Measurements herein supersede all others published prior to publication date below.
Options Must be ordered at time of purchase
- Standard: White (no charge)
- Color Upgrade: Biscuit (MTISCOLOR)
- Quick Ship / Priority
- Soaker & Whirlpool (QSHIPMTIS)
- Airbath (QSHIPMTISA)
- Inline Heater
- For Whirlpool (HTRMTIS) uses existing pump
- For Soaker & Air Bath (MBHTI SOAK) heater with recirculating pump
Accessories
- Lift and Turn Drain & Overflow
- Chrome (MBWOC), White (MBWOW),
- Brushed Nickel (MBWOBN)
- Pillows
- Soft Pillow
- White (MBPSW) Black (MBPSB)
- Roll-Up Pilow
- Light Aqua (MBPRUC) Black (MBRUB)
| Hydrotherapy Package | Components Included | GFCI / 110V |
|---|---|---|
| Soaker with Optional Inline Heater | ½-bhp pump, inline heater | 1-15 amp |
| Whirlpool or Air Bath | 1-bhp pump | 1-15 amp |
| Whirlpool with Optional Inline Heater | 1-bhp pump, inline heater | 1-20 amp |
| Air Bath with Optional Inline Heater | heated blower, ½-bhp pump, inline | |
| heater | 2-15 amp |
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
NOTE: Filling this tub to the maximum may require an above-average size or dedicated water heater.
©2021 by MTI Baths, Inc. Modification Rights Reserved.
CSA # MTIS-IS6036
Rev. 12 10 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>