MTI Baths MBIS6030 Integral-Skirted Rectangular Tub Instructions
- June 9, 2024
- MTI Baths
Table of Contents
Baths MBIS6030 Integral-Skirted
Rectangular Tub
Instructions
MBIS6030
59.75” x 30” x 19.25”
Installation: Alcove
Material: Acrylic
Plumbed Weight: 117 lbs / 55 kg
Soaker Weight: 90 lbs / 41 kg
Average Fill: 40 gal to above jet level
Maximum Fill: 48 gal to overflow
| Package | Package Content | Part # |
|---|---|---|
| Soaker | Soaking bath – No jets. Integral front skirt, 3-sided integral tile | |
| flange and textured bottom. | MBSIS6030 | |
| Air Bath | 12 air jets, heated air blower, pre-leveled foam base, |
textured bottom, integral front skirt and 3-sided tile flange.pre-leveled foam
base increases overall tub height 2”-3”| MBAIS6030
Whirlpool| 6 point-massage jets, 1-bhp pump, integral front skirt,
3-sided integral tile flange and textured bottom.| MBWIS6030
Shown with Whirlpool Package
Important Ordering and Installation Information
- Before ordering or installing, consider access to equipment.
- Must specify left- or right-hand drain when ordering.
- Tubs equipped with hydrotherapy components have a removable front panel.
- Use proper bedding compound to fully level and support the tub.
- Tubs equipped with an air system or factory installed pre-leveled foam base are designed to install directly onto a flat level subfloor.
- Location of all therapy components is predetermined and cannot be changed.
- Suction and control locations may vary.
- Options listed cannot be combined with Designer Collection options.
- Before discarding tub crate, check for accessories that may be packaged inside.
- All product measurements are +1/2”.
- Specifications and configurations are subject to change without notice.
- Measurements herein supersede all others published prior to publication date below.
Options Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump
For Soaker & Air Bath (MBHTI SOAK) heater with recirculating pump
Accessories.
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MBWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB) 
| Hydrotherapy Package | Components Included | GFCI / 110V |
|---|---|---|
| Soaker with Optional Inline Heater | 1/2-bhp pump, inline heater | 1-15 amp |
| Whirlpool or Air Bath | 1-bhp pump | 1-15 amp |
| Whirlpool with Optional Inline Heater | 1-bhp pump, inline heater | 1-20 amp |
| Air Bath with Optional Inline Heater | heated blower, 1/2-bhp pump, inline | |
| heater | 2-15 amp |
NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater.
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
©2021 by MTI Baths, Inc. Modification Rights Reserved.
Rev. 03 15 2022
CSA # MTIS-IS6030
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>