LKT DB-1 Pro Bike Motorcycle Helmet Camera User Manual

: June 15, 2024
: LKT

Table of Contents

LKT DB-1 Pro Bike Motorcycle Helmet Camera
Product Specification
Product Features
Product Structure
Operations
Set up
Using the Remote Control
Use the APP via WIFI
Common Questions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LKT DB-1 Pro Bike Motorcycle Helmet Camera

Product Specification

Aperture : F/1.8
Lens Angle: Front 140 ° I Rear 140 °
Photo : JPG Max. 2M
Video : MP4 H.265
Resolution:
- QHD 2K Single-Channel
- FHD 1920 x 1080P 30fps Dual-Channel
- HD 1280 x 720P 60fps Dual-Channel
Battery : 1600 mAh ( Note : 3.5 – 4 hours )
Size / Weight: 110 x 40 x 33 (mm)/ 104g
Memory Card: TF card Max. 128G
Wi-Fi : Built-in
MIC : Built-in
Controller : Optional wireless controller can take a photo/lock the file

Product Features

Unique patented design in the market
Portable design, easy DIV installation can be used for various activities
Energy-efficient detection to maximize battery duration
Dual-channel FHD 1080P / Single-channel 2K recording
Storage capacity: max. 128G
Wi-Fi connectivity to smartphone

Product Structure

$LKT-'DB-1-Pro-Bike-Motorcycle-Helmet-Camera-fig- $1$$

Key button
TF card slot
MIC
USB charging port
Reset

Key button commands

To power on / off : Press and hold the button for 3 seconds, and the camera will vibrate.
To start/ stop recording : Press the button ONCE.
To turn the Wi-Fi on / off : (Stop recording first.) Press the button TWICE. To format the TF card : (First, stop recording and turn off the Wi-Fi.) Press the button 5 times and the camera will vibrate 5 times.

Note : If the camera detects there is no TF card inside or can’t read the new card, the 3 lights will flash quickly and it’s a warning (an error) or no card.

Operations

Charge the Battery

Please charge the camera before use.
Please use the USB cable included to charge the camera.
While charging, the charging light (red light) will remain on, and it will automatically shut off at full charge.

Note : During use, the GREEN light will flash quickly if battery is LOW. If the battery reaches 0%, the camera will automatically turn off.

Insert the TF card

Open the cover of the TF card slot.
Insert a Class 10 or above TF card. Max. storage is 128G. Please make sure to insert the TF card in the right direction and cover the card slot.
Don’t remove the TF card while the camera is recording.
Please format the TF card when using it for the first time. Format the TF card by pressing the camera’s key button 5 times.

Note : When using a new 64GB / 128GB TF card, make sure to format it first or the camera might not be able to detect it (you will see 3 lights flashing quickly).

Format the TF card

By pressing the camera’s key button:

Step 1: Press the key button TWICE to turn off the Wi-Fi.
Step 2 : Press the key button 5 times and the camera will vibrate 5 times to format the card.

When the format is done, the camera will automatically start recording and the white light is slow flashing.

Using the Camera

Before use, make sure that the camera is fully charged and the TF card is inserted.
Note : The TF card must be formatted when using it with the camera for the first time.
Long press the key button 3 seconds to turn on the camera, and it will vibrate once.
Once the camera is turned on, the recording light (white light) remains on (meaning, it’s not recording), then it will automatically start recording. The white light will flash during recording. To STOP recording, press the key button. The camera will vibrate once, and the white light will remain on (not flashing). To start recording again, press the key button and the camera will vibrate. The white light will start flashing indicating that the camera is recording.
Turn on the camera’s Wi-Fi by pressing the key button TWICE. The blue Wi-Fi light will flash indicating that the camera’s Wi-Fi is turned on. If it is not connected to the phone’s Wi-Fi within 1 minute, the camera’s Wi-Fi will automatically turn off. If the camera is connected to the phone’s Wi-Fi, the blue light will remain on (it will not be flashing).
Note : If you turn off the camera without turning off the camera’s Wi-Fi, the next time when the camera is turned on, the Wi-Fi will automatically be on.
Long press the key button 3 seconds to turn off the camera, and it will vibrate twice.
If the camera can’t detect a memory card or if there’s an error in reading the card, the camera will vibrate 3 times and 3 lights will flash as a warning.

Low-power Alarm
The battery light (green light) shows the camera’s battery power.

Green light remains on : battery power is more than 50%.
Green light slow flashes : battery power 30%-50%.
Green light quick flashes : battery power is less than 30%.

Note : During use, the GREEN light will flash quickly if the battery is LOW. If the battery reaches 0%, the camera will automatically turn off.

Intelligent Energy-saving System

When the camera does not detect any motion for 3 minutes, it will automatically turn off.
When an external power supply is connected, the energy-saving system will be disabled.
This feature can be turned on/off in the APP’s setting page.

Set up

Please check the video of how to set up the camera.

Open the main camera holder and put the camera in.
Screw up the camera holder.
Stick the mount on the helmet.
Assemble the quick release clip with the mount.
Remember to press the rubber pad tightly to avoid any vibration.

Using the Remote Control

The remote control is optional. The camera and remote control will be automatically connected within 3 meters.

$LKT-'DB-1-Pro-Bike-Motorcycle-Helmet-Camera-fig- $8$$

Use the APP via WIFI

Please scan the QR code to download the APP, or search LOOKING CAM on Google play/APP store.

Download the LOOKING CAM APP to your phone.
After turning on the camera, press the key button TWICE to turn on its Wi-Fi. Once the Wi-Fi is on, the blue Wi-Fi indicator light will flash.
Note : If the camera is not connected to the phone within 1 minute, the camera’s Wi-Fi will automatically turn off. If the camera successfully connects to your phone, the camera’s blue Wi-Fi indicator light will remain on (not flashing).
Go to your phone’s Wi-Fi setting page, click the camera’s Wi-Fi and enter the password to connect to it. The camera’s Wi-Fi name is DB1+SSID NO. and the password is 12345678.
Note : Please DON’T change the Wi-Fi name nor password to avoid connection errors.
Once the camera’s Wi-Fi is connected to your phone’s Wi-Fi, open the LOOKING CAM APP and follow the on screen instructions to add the camera to the APP.
If successful, you’ll see the camera in the LOOKING CAM app. Click ACCESS CAMERA, you can now use the app to control the camera, start/ stop recording, take photos, view and download your videos, and more.
When the camera is connected to the APP (blue light is ON but NOT flashing), all operation (such as start/ stop recording) should be done through the APP because the key button on the camera will be disabled.
To change the camera’s settings, go to the APP then press the Settings icon.
Note : The camera will STOP recording when you’re in the Settings page (the white light is on, but NOT flashing). Remember to go back to the main page, so the camera can continue recording (indicated by the flashing white light).

Condensation Notice

Due to the good sealing of LOOKING camera, there is no leakage for air to flow in or out. It is normal the condensation forms on the lens case when drastic changes in temperature or humidity occurs. You may twist open one side of the lens case to let the condensation dissipate.
Remember to fasten the case back to avoid any future moisture damage.
This camera has completed internal moisture removal before being shipped out from the factory. Condensation won’t affect the camera’s functions.

If you need any further assistance, please email to sales@lookingtaiwan.com

THANK YOU!

Common Questions

I can't connect the APP.

Please check if you've turned on your phone and camera's Wi-Fi. Is the camera's blue light flashing? If the blue light doesn't appear, it means that the camera's Wi-Fi is not turned on. Stop recording first, then turn on the Wi-Fi by pressing the key button twice (the blue light will be flashing). Find the camera in your phone's Wi-Fi settings page and connect to the camera. Please check that you're connected to Wi-Fi, and not Bluetooth. Please check the flashing of the lights, if you see 3 lights flashing quickly, this means that the camera can't detect the memory card. Format the memory card by pressing the key button 5 times, then connect it again.

The camera turns off automatically.

Please check if the memory card is inserted properly? The camera has a 3 minute energy saving detection feature. If the camera detects no movement for 3 minutes, it will automatically turn off to save power.

Updating the firmware of the camera.

If a new firmware is available, you can download it from our website or you can update the firmware through the LOOKING CAM APP.

Setting the date & time.

When you connect to Wi-Fi, the date & time will auto update, so you don't need to set it manually.

Why can't I use a 64G or 128G memory card?

When you are using a 64G or 128G memory card, you need to format the memory card first to get the right FAT32 format. After formatting the card you can use it without any problem. Please check page 3 to learn how to format the memory card by pressing the key button.