Anker Prime 100W GaN Wall Charger 3 Port User Manual
- June 15, 2024
- Anker
Table of Contents
Live Charged.
Anker Prime
100W GaN Wall Charger (3 Ports)
USER MANUAL
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2343 is in
compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that the product type A2343 is in
compliance with Electrical Equipment (Safety) Regulations 2016 &
Electromagnetic Compatibility
Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for
Energy-Related Products Regulations 2010. The full text of the GB declaration
of conformity is available at the following internet address:
https://www.anker.com.
For tutorial videos, FAQs, manuals, and more
information, please visit:
https://support.anker.com
Or scan the QR code below:
https://rainbowbridge.anker.com/qrscan?key=anker-221202
Indoor use only
**** This symbol indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK
matters)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Specifications
Input
JP: 入力| 100V-240V~50/60Hz 2.1A
---|---
Output
JP: 出力| Use 1 Port Output
USB-C1/C2:5V 3A/9V 3A/12V 3A/15V 3A/ 20V 5A (100W Max)
USB-A:4.5V 5A/5V 4.5A/5V 3A/9V 2A/ 12V 1.5A/10V
****2.25A(22.5W Max)
Use 2 Ports Output
USB-C1+USB-C2: 100W Max
USB-C1+USB-A: 100W Max
USB-C2+USB-A: 100W Max
Use 3 Ports Output/ 100W Max
Total Output /100W Max
PPS| Support PPS
Average active efficiency| 79.20%
Efficiency at low load (10%)| 59.18%
No-load power consumption| 0.27W
Operating temperature| 0℃-25℃/32℉-77℉
Note: To ensure electrical safety and product performance, the output
power may fluctuate based on the ActiveShield™ safety mechanism when the
ambient temperature is between 26-35°C(78.8-95°F)with a high output load.
*ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.
Customer Service
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
24-month limited warranty *
Lifetime technical support
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
PAP 22
Raccolta XCarta
Product Number: A2343
51005003932 V01