Wholesale Y-QB01 Portable Car Air Pump User Manual
- June 15, 2024
- Wholesale
Table of Contents
Wholesale Y-QB01 Portable Car Air Pump
Power button
Long press to power on/off, short press to start/stop inflation after power
on, 3 minutes After not using automatic shutdown
Mode switch
This product provides four inflatable modes for you to choose. It is
convenient for you to switch between different situations.
The four modes are: “Car”, “Motorcycle”, “Bicycle”, and “Ball”. You can use
the mode key C’ to select and choose, and the default value Of the air
pressure will automatically change after the selection.
Unit switching
This product provides four pressure units for you to choose. It is convenient
for your local usage habits and you can switch between them.
The four units are: “PSI”, “BAR”, “KPA”, “kg / cm2”. You can switch with the
unit key.
Set value adjustment
- This product is set with a default air pressure value, but if it does not meet your needs, you can also manually adjust the air pressure value from the main, press to increase or decrease the number (short press is to increase or decrease 0.01 value each time, long press
- It is a quick adjustment, and it is also a quick adjustment in units of 0.01.) After adjusting to the value you want, wait for 3 seconds to complete the automatic setting.
- At this time, the air pump air pressure setting value has changed to the number you set. At this time, directly press the key to start the air pump.
Product description
- Inflating Tube Socket
- Flash Light 6
- Type-C
- LED Display
- Button Plat
- USB
Product parameters
- Storage Temperature: -20 600C
- Product Size:
- Input: 5V/2A 9V/2A; Output: 5V/2A
- LED Lighting : I LED lighting
- Working Temperature: -10 45 oc
- Inflating Tube Size: 200mm trachea extraction length (including air nozzle)
LED Flash Light
This product is equipped with LED lighting function, which can help you use
it when working in dark places. Long press the- button to turn on the LED
light, short press to switch the SOS function, long press again to turn off
the LED light.
Product charging, mobile charging
-
Product charging for Type-C interface;
input: 5V/2A; 9V/2A; Support QC fast charging protocol -
USB-A interface for the charger.
Output: 5V/2A
Notice
- This product is forbidden to be used alone by children.
- Children must be accompanied by an adult.
- Never insert the trachea into the mouth, ears, nose or eyes of a human or animal to inflate!
- Do not use this product as a toy product.
- Do not use this product near flammable and explosive liquids and gases (such as gas stations, gas stations)
- Inflating will cause physical heating phenomenon of high-pressure operation. Be careful when you remove the air pipe.
- After 15 minutes of continuous use, it is recommended to continue using after 5-10 minutes.
Frequently Asked Questions
If you have other questions, please contact customer service for help.
The outlet of the air pump and screw it tightly. After attaching the air
nozzle to the ball needle (or two other conversion nozzles), press down the
handle. After confirming whether the air pump mode is correct, press the key
to start air pump. Stop when it reaches the set value.
There are four pressure units for you to choose from:
PSI / Bar / Kpa / Kg/cm2
Default values of tire pressure in various modes
0.6 2.2 2.5 Kg/cm2
-
Step 1
Connect the air hose to the product. -
Step 2
Connect the air nozzle to the tire and turn the product on
-
step 3
Select the car inflation mode -
Step 4
Just press the start button for inflation
Cases not covered by warranty service
- Apply After the warranty period
- Without Warranty card, valid invoice or other valid sales certificate;
- The warranty card voucher model does not match or is altered;
- Damage caused by failure to use, maintain, maintain or use non-original accessories by the instruction manual;
- Unauthorized repairs, alterations, misuse, collisions, drops, crushing, fluid penetration, corrosion;
- Torn, altered, or illegible product labels, seals, and serial numbers (SN)
- Damage caused by irresistible floods, fires, lightning strikes, etc .,
- Defects caused by normal wear and tear of the product;
- Products not sold in mainland China.
Paid service guarantee
If the product does not meet the warranty service conditions but requires
maintenance, the appropriate maintenance cost will be calculated according to
the parts and labor costs, and a quote will be provided to you. After
obtaining your consent, we will provide you with product maintenance services.
Contacts
Email: HMF20200@hotmail.com