Rowley NS13LN Long and Short Nose Upholstery Air Stapler Instructions

Rowley NS13LN Long and Short Nose Upholstery Air Stapler

Product Information

The Long & Short Nose Upholstery Air Stapler (NS13LN & NS13) is a versatile tool designed for upholstery and window treatment applications. It is capable of fastening various materials such as cornice boards, headboards, sofas, chairs, ottomans, upholstered walls, and dust boards for window treatments. The NS13LN model features an air exhaust, trigger safety trigger, air inlet, magazine cover latch, and a nose for staple discharge. The NS13 model is equipped with a short nose for specific applications.

Specifications:

• Operating Power: Compressed air with pressure: 60 ~100 psi equipped with filter
• Hose Length: Up to 16 ft (or 5M)
• Fastener Type: 22 gauge fine wire 71 series staples
• Compatible Fasteners: NS32/E, NS33/E, NS34/E, NS35/E

The product manual contains important safety warnings, operation instructions, maintenance guidelines, parts lists, and diagrams. It is essential to read and understand the manual before using the Air Stapler to ensure safe and optimal usage.

Product Usage Instructions

Safety Instructions:

1. Please read the instruction manual carefully before use.
2. Always wear ear and eye protectors.
3. Do not exceed the maximum operating air pressure of 110 psi (or 8kGf/sqcm).
4. Always disconnect the tool from the air supply before loading staples, clearing a jam, or servicing.
5. Always disconnect the tool from the air supply when not in operation. Never leave the tool unattended while connected to the air supply.
6. Do not point the tool at yourself or any person.
7. Do not use oxygen, flammable gas, or any other type of gas as a power source. Use regulated and filtered compressed air only.
8. Keep hands or any body parts away from the stapler nose area when the tool is connected to compressed air.
9. Keep the tool out of reach of children.

Operation Instructions:

STEP 1. Load Staples:

1. Slide the slider unit back.
2. Lift the click lever to open the magazine.
3. Insert a set of staples with the square feet of staples facing up.
4. Close the magazine by pressing down the click lever.

STEP 2. Shooting Staples:

Follow the specific instructions for shooting staples based on your application. Refer to the diagram in the manual for visual guidance.

STEP 3. Maintenance:

Regular maintenance is essential to maximize the service life of your stapler. Keep all parts clean, dry, and free from debris or air leakage. Refer to the manual for detailed maintenance guidelines.

Limited Warranty:

The product comes with a limited warranty. Refer to the manual for warranty terms and conditions.

IMPORTANT:
Drop 1-2 drops of oil into the stapler air inlet BEFORE first use. See page 3.
Please read the safety, operation and maintenance instructions BEFORE using the Air Stapler.

SPECIFICATIONS

• Operating Power: Compressed air with pressure: 60 ~100 psi. equipped with filter.
  Hose length should be no greater than 16 ft (or 5M).

• Keep all parts clean, dry, no debris, no air leaking.

• Fastener type: 22 gauge fine wire 71 series staples.

• NS13 and NS13LN staplers use the same fasteners Rowley Company sells (Item #s: NS32/E, NS33/E, NS34/E, NS35/E).

IMPORTANT:
This manual contains safety warnings, operation, maintenance, parts lists and diagrams. Keep the manual in a safe place for future reference. The instructions will help you maximize the service life of your stapler.

APPLICATIONS

• For upholstery: cornice boards, headboards, sofas, chairs, ottomans, upholstered walls, etc.
• For Window treatment: covering dust boards, mounting soft treatments to dust boards, etc.

SAFETY INSTRUCTIONS

1. Please read the instruction carefully before use.
2. Always wear ear and eye protectors.
3. Do not exceed the maximum operating air pressure of 110 psi (or 8kGf/sqcm).
4. Always disconnect the tool from the air supply before loading staples, clearing a jam or servicing.
5. Always disconnect the tool from the air supply when not in operation. Never leave tool unattended while connected to air supply.
6. Do not point the tool at yourself or at any person.
7. Do not use oxygen, flammable gas, or any other type of gas as a power source. Use regulated and filtered compressed air only.
8. Keep hands, or any body parts away from the stapler nose area when the tool is connected to the compressed air.
9. Keep tool out of reach of children.

OPERATION INSTRUCTIONS

STEP 1. Load Staples

• Disconnect the stapler from air supply.
• Turn upside down. Depress the magazine lever (Fig. 1) and pull open the magazine slide (Fig. 2).
• Drop in a strip of staples with staple legs pointing up (Fig. 2).
• Push the magazine slide forward until the magazine lever catches securely (Fig. 3).

STEP 2. Shooting Staples

• CAUTION: Always wear safety glasses and earplugs.
• Connect the stapler to the air supply.
• Regulate air pressure to 70 psi.
• Keep the drive guide downward and stick against the object before pulling the trigger.
• If staples do not penetrate deep enough, especially when stapling into hardwood or if the stapler misfires occasionally, or the piston does not return to full-up position at the end of the cycle, the air pressure may be too low. Adjust the regulator to increase air pressure gradually and try again.
• WARNING: Do not exceed the maximum operating pressure of 100 psi.
• After use, always disconnect stapler from air supply and unload the staples.

STEP 3. Maintenance

• Stapler requires lubrication before each use. Disconnect stapler from air supply. Drop 1-2 drops of oil into the air inlet. Wipe off excess.
• If tool is not working properly, contact customer service for repair.

Limited Warranty

• 90 days warranty period from the date of purchase.
• The warranty covers material and workmanship defects of the Long and Short Nose Upholstery Stapler sold by Rowley Co. only.
• During the warranty period, replacements or repairs (at Rowley Co.’s discretion) of the tool will be made free of charge.
• The warranty does not cover damages by accident, misuse or due to using staples not recommended by Rowley Co. Unauthorized repair or modification of the tool will void the warranty.
• After warranty period expires, customers can still receive repair services from Rowley Co. The customer will be charged the labor and parts cost.
• To receive the repairs or replacements under warranty or to obtain repair services after warranty period expires, the tool must be returned to Rowley Co. at the customer’s expense.
• The user of the tool must read and understand the safety, operation, and instructions. Rowley Co. is not liable for any personal injuries or material damages associated directly or indirectly with using this tool.

EXPLODED VIEW AND PARTS LIST

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>