JOURNEY JREMWCVM Rapid Express Magnetic Wireless Car Charger User Manual
- June 15, 2024
- Journey
Table of Contents
User Manual
JREMWCVM Rapid Express Magnetic Wireless Car Charger
Rapid Express
Magnetic Wireless Car Charger
Package Contents
i. Magnetic Wireless Car Charger
ii. 2 in 1 USB-C/A to USB-C Cable
iii. Support Bracket
iV. Car Air Vent Holder
v. Adhesive Dash Mount
vi. User Manual
vii. Magnetic Ring
viii. Quick Start Guide
- MagSafe Wireless Charging Surface
- Nut
- Rotatable Ball Joint
- Locking Knob
- Adjustable Hook
Loosen the nut 2 by turning it anticlockwise and connect the Ball Joint of the mount.
Air Vent Mode
Fasten the nut 2 by turning it clockwise to tighten. Loosen Locking Knob 4 by
turning it anti-clockwise and adjust the Hook 5. Push the Hook 5 forward into
the air vent outlet of the car and fasten it with the Locking Knob 4.
Circular Vent Mode
Insert the Air Vent Mount into the Support Bracket iv for extra stability
when attaching to circular air vent.
Adhesive Dash Mount
Make sure the surface you want to mount the dash mount on is clean and dry.
Peel off the protective film, align the mount to the desired location and
firmly press it onto the surface, allow the adhesive to cure for 24 hours.
Use the included cable to connect the car USB ports / power adapter to Rapid
Express Charger’s USB-C Port.
Mount your MagSafe-compatible device by placing it on the centre of the
JOURNEY Logo.
The charger’s magnet will align the phone for optimal charging.
- If you don’t have MagSafe-compatible phone case for your device, please attach the included Magnetic Ring to the back of your phone case to make your phone case MagSafe-compatible. This is may not work for cases thicker than 2mm.
Troubleshooting
| Symptom | Solution |
|---|---|
| Phone doesn’t stick on the charging sruface | • |
| Charging start & stop | |
| Charging speed is slow | |
| Not able to mount on the vent |
Warnings
- This device uses inductive charging. Do not place metallic objects (aside from devices which support wireless charging) on top of the charging pad.
- Avoid placing phone cases which include metallic portions on the charger. In rare cases it may not be possible to detect smaller metallic objects, such as foil logos on phone cases and the charger may continue to operate. In these cases, the metallic object will heat up and over time may cause damage to the device being charged.
- This device is designed for in-car use only.
- Do not deliberately damage the device or expose it to damp, direct sunlight, or high temperature conditions.
- It is normal for the device to be slightly warm to touch during operation. Provide adequate ventilation and do not cover the device while in operation.
- Disassembling or failing to properly use and care for your device will void the warranty on the product.
- Do not use the product if it becomes damaged as this could pose a risk of causing damage to connected devices.
- Journey bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care. Journey will not be held liable for repair or replacement of the device or other damages in these circumstances.
Specification
| Model | JREMWCVM |
|---|---|
| Dimensions | 70(L) x 61(W) x 81(H) mm |
| Weight | 72gms |
| Input | USB-C DC 5V/2A, 9V/2A, 12V/1.5A |
| Output | MagSafe Wireless Qi Charging (15W Max) |
| Warranty | 1 Year |
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment of and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Responsible Party – U.S. Contact Information
ALOGIC USA LLC
3730 Parish Ave
Fremont CA 94536 USA
DESIGNED IN AUSTRALIA
© JOURNEY. All rights reserved. Reproduction in whole or in part without
permission is prohibited.
All other trademarks are the properties of their owners.
JOURNEY is the trademark of ALOGIC Corporation