JOURNEY ALTI Wireless Charging Reversible Desk Mat User Guide

JOURNEY ALTI Wireless Charging Reversible Desk Mat

Package Contents

1. Wireless Charging
2. Reversible Desk Mat

OVERVIEW

1. USB-C Port
2. LED Indicator
3. Wireless Phone Charging Surface
4. Wireless Earbuds Charging Surface
5. Desk Mat

POWER

1. Vegan Leather
   

2. Felt

3. 

Specifications

• Model: JWCDMBK/JWCDMLG
• Dimensions: 370()x 780(w) x 4(4) mm
• Weight: 639gms
• Material: Vegan Leather, ABS, Felt
• Input: USB-C DC 9V/3A
• Output: Wireless Charging for Phones- 15w[Max) (Magsafe Compatible)/Wireless Charging for Earbuds/AirPods/Pro-5W(Max)
• Warranty: 1 Year

Instructions

(Refer to the images on the previous pages)
Choose the side of desk mat to use
Choose the side to use. The surface-treated vegan leather side supports precise mouse movement. You can choose to flip your desk mat over to use the soft felt side too.

Setup your wireless charging pad
Magnetically snap both the charging pad and desk mat in place. Attach/detach the charging pad to move and place it as required on the left or right side.

Charge your devices wirelessly

1. Connect the available USB-C Cable to the USB-C port and connect the other end to a 20W USB-C or higher power adapter
2. Place your wireless charging on bold or Mogsafo compatible device on top of the circular charger the integrated magnet will snap the device in place (For MagSafe compatible iPhones only). Look for the charging icon on the Phone to confirm charging has started.
3.  Place wireless charging enabled Earbuds/Air Pods 2/3/Pro on the smaller charging area towards the top of the pad “Place color Lo Lho diagram given below:

LED INDICATE

• LED status Device Behavior
• Solid White Power on
• Breathing White Wireless charging in operation
• Flashing Red Motal or abnormal object detected
• off Power off

Troubleshooting

Warnings

• The device uses inductive charging Do not place metallic objects (aside from Irom devices that support wireless charging) on top of the charging pad. Avoid placing phone cases that include metallic portions on the charger. In rare cases, it may not be possible to detect smaller metallic objects, such as foil logos on phone cases, and the charger may continue to operate. In these cases, the metallic object will heat up and may cause damage Lo the device being charged Overtime
• This device is designed for indoor use only
• Do not deliberately damage the device or expose it to damp direct sunlight or high-temperature conditions.
• it is normal for the device to be slightly warm to the touch during operation. Provide adequate ventilation and do not cover the device while in operation.
• Disassembling or failing to properly use and care for your device will void the warranty on the product
• Do not use the product if it becomes damaged as this could pose a risk of causing damage to connected devices
• Journey bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care, Jouncy will not be held liable for repair or replacement of the device or other damages in these circumstances.

FCC Compliance Statement

This device complies with Port 15 of the FOC RUles. Operation is subject to the following two conditions

1. This device may not cause hamíul interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and it is not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment doos causa harmful information to radio or television captains which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or rere of the following features

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer Or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with installed and operated with a minimum set distance for an uncontrolled radiator and your body This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>