JOURNEY JWCS16DB Nexa Laptop Sleeve with Wireless Charging User Guide

JOURNEY JWCS16DB Nexa Laptop Sleeve with Wireless Charging User Guide

Package Contents

• NEXA Laptop Sleeve with Wireless Charging

• USB-C Cable

• User Manual

Connecting the USB-C Cable

• For optimal performance, use with a USB-Cwall charger, power bank or any USB-C power source with 20W or higher. Wall charger not included.
  

Place your devices on the charger

Specifications

• Model: JWCS16DB
• Dimensions: 390(L) x 290(W) x 25(H) mm
• Weight: JWCS16DB
• Material: Polyester, Polyethylene, ABS
• Input: USB-C DC 12V/2.5A
• Output: Wireless Charging for Phones – 15W (Max) (MagSafe Compatible) Wireless Charging for Earbuds/AirPods/Pro – 5W(Max)
• Warranty: 1 Year

Troubleshooting

• Move the device slightly around the charging surface. Align the center of the device roughly with the circular charging area.
• Ensure that your device supports wireless charging.

Wireless device stops charging|

• Ensure device is aligned at the centre of wireless charging area.
• Thick cases can interfere with wireless charging – if using a case try removing your device from the case while charging
• Use a USB-C Power Source of appropriate output. Must be 20W and above.

Warnings

• This device uses inductive charging. Do not place metallic objects (aside from devices which support wireless charging) on top of the charging pad.
• Avoid placing phone cases which include metallic portions on the charger. In rare cases it may not be possible to detect smaller metallic objects, such as foil logos on phone cases, and the charger may continue to operate. In these cases, the metallic object will heat up and may cause damage to the device being charged over time.
• This device is designed for indoor use only.
• Do not deliberately damage the device or expose it to damp, direct sunlight, or high temperature conditions.
• It is normal for the device to be slightly warm to touch during operation. Provide adequate ventilation and do not cover the device while in operation.
• Disassembling or failing to properly use and care for your device will void the warranty on the product.
• Do not use the product if it becomes damaged as this could pose a risk of causing damage to connected devices.
• Journey bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care. Journey will not be held liable for repair or replacement of the device or other damages in these circumstances.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Responsible Party – U.S. Contact Information

ALOGIC USA LLC
37524 Marsten DR,
Newark CA 94560 USA

EU Declaration of Conformity

Hereby, ALOGIC Corporation declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address by clicking on the Compliance Documentation link: journeyofficial.com

Innovation, Science and Economic Development Canada Statement (ISED)

This device complies with RSS-216 of the Industry Canada Rules. Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:

The product complies with the Canada portable RF Exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user’s body or the device is set to a lower output power if such a function is available.

This digital apparatus complies with CAN ICES-003(B)/NMB-003 (B).

© JOURNEY. All rights reserved. Reproduction in whole or in part without permission is prohibited.
All other trademarks are the properties of their owners.
JOURNEY is the trademark of ALOGIC Corporation

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>