EDIMAX BT-8500 Bluetooth 5.0 Plus EDR Adapter Installation Guide

: May 16, 2024
: EDIMAX

Table of Contents

Product Information& Safety Information
Hardware Installation
Driver Installation
Adding Devices
Uninstall A Driver
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BT-8500
Quick Installation Guide
03-2021 / v1.1

Product Information& Safety Information

The Edimax BT-8500 dual mode (BR/EDR + LE) real Bluetooth 5.0 is a Nano USB adapter that supports data rate maximum 3 Mbps.
The BT-8500 is a portable ultra-small design USB adapter with USB 2.0, you can plug into any USB port and enjoy incredible high-speed Bluetooth 5.0.
Please install the unit with the safety restrictions outlined below:
– Do not place the USB adapter in or near hot/humid places, such as a kitchen or bathroom.
– There are no user-serviceable parts inside the USB adapter. If you experience problems with the USB adapter, please contact your dealer and ask for help.
– The USB adapter is an electrical device, if it becomes wet for any reason, stop using it immediately.
You can find all supporting documents from the link below or via QR Code: https://www.edimax.com/download

https://www.edimax.com/download

(Once you’ve visited the Edimax official website, please enter model no.
“BT-8500” into the search box to search for your product.) EDIMAX BT 8500
Bluetooth 5.0 Plus EDR Adapter - Information 1 I-1. Package Contents EDIMAX BT 8500 Bluetooth 5.0 Plus
EDR Adapter - Information 2 I-2. System Requirement
– Windows 8.1/10 32bit/64bit or above
– Linux: kernel 2.6.32~4.15, suggest 4.4 (after)
– 1 x USB 2.0 Type A
I-3. Hardware Interface

No.	Description
1	Case
2	USB 2.0 Type A

Hardware Installation

Please follow the steps below to install your Bluetooth USB adapter,

Turn on your PC.
If your PC or laptop has Bluetooth capability, please disable Bluetooth before using the Bluetooth USB adapter.
Insert the USB adapter into an available USB port of your computer.

EDIMAX BT 8500 Bluetooth 5.0 Plus EDR Adapter - Interface
1 Never use force to insert the USB adapter.

Driver Installation

Please follow the steps below to install the driver,

Go to Edimax website (https://www.edimax.com/edimax/global/).
Enter model no. “BT-8500” into the search box to search for your product, and Go to Download, and download the driver.
Open the folder and double click to install the driver.
Click “Next” to continue and follow the instructions on-screen until installation is complete.
Select restart your computer now or later and click “Finish”.

Adding Devices

Please follow the steps below to add the Bluetooth devices,

Go to Windows Bluetooth settings by using the search bar, or by right clicking the Bluetooth icon in the task bar and choosing Add a Bluetooth Device.
Select your Bluetooth device and click Pair and then confirm the passcode.
Your device is now ready to use when it shows “Connected”.

Uninstall A Driver

Please follow the steps below to uninstall a driver for your USB adapter,

Open Control Panel using the Start menu or Search function.
Select Uninstall a program under the Programs category.
Select Edimax BT-8500 (or similar) and Edimax Bluetooth 5.0 (or similar) and click Uninstall.
Click Yes to continue.
Select restart your computer now or later and click “Finish”.

COPYRIGHT
Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio technician for help.

FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body.
RED Compliance Statement
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

Frequency range (MHz)	Max. Transmit Power (dBm)
2412-2472	9.97

A simplified DoC shall be provided as follows: Article 10(9)
Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type Bluetooth 5.0 USB Adapter is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not Intended for Use
None
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body.
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. WEEE Directive & Product Disposal
** At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives.
Equipment: Bluetooth 5.0 USB Adapter
Model No.: BT-8500
The following European standards for essential requirements have been followed:
Directives 2014/53/EU
Spectrum : EN 300 328 V2.2.2 (2019-07)
EMC : EN 301 489-1(Class B) V2.2.3 (2019-11) EN 301 489-17 V3.2.2 (Draft) (2019-12)
EMF : EN 62479:2010
Safety (LVD) : IEC 62368-1:2014 (2nd Edition) and/or EN 62368-1:2014+A11:2017
Edimax Technology Europe B.V. a company of:
Fijenhof 2, Edimax Technology Co., Ltd.
5652 AE Eindhoven, No. 278, Xinhu 1st Rd.,
The Netherlands
Neihu Dist., Taipei City, Taiwan
Printed Name: David Huang
Title: Director Edimax Technology Europe B.V. **Date of Signature: July, 2020
Signature: Printed Name: Albert Chang
Title: Director Edimax Technology Co., Ltd.

Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan
Email: support@edimax.com.tw
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven, The Netherlands
Email: support@edimax.nl
Edimax Computer Company
530 Technology Drive Suite 100, Irvine, CA 92618, USA
Email: support@edimax.us