CHAUVET DJ 4BAR Flex Q ILS LED Wash Light User Manual

CHAUVET DJ 4BAR Flex Q ILS LED Wash Light

Before You Begin

What Is Included

• 4BAR Flex Q ILS
• Power cable
• Carrying bag
• Wireless footswitch
• IRC-6 Remote
• Quick Reference Guide

Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

electrical damage to the product, accessories, or the user.
****| Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
 | Important installation or configuration information. The product may not function correctly if this information is not used.
 |  |  | Useful information.
 |

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetdj.com.

Intellectual Property

The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Chauvet, Chauvet DJ, the Chauvet logo, and 4BAR Flex Q ILS are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.

Safety Notes

• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• The product is not intended for permanent installation.
• The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never attempt to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
  Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document.

Introduction

Product Overview

WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause damage to the product.

Setup

AC Power
The 4BAR Flex Q ILS has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
  Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
5. Insert the fuse holder back in place and reconnect power.

Disconnect the product from the power outlet before replacing the fuse.

Power Linking
The product provides power linking via the outlet located in the back of the product. See the diagram below for further explanation.

Power Linking Diagram

It is possible to power link up to 6 4BAR Flex Q ILS products on 120 VAC or up to 13 4BAR Flex Q ILS products on 230 VAC.
The power linking diagram corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local Chauvet distributor as power linking connectors and requirements may differ in your country or region.

Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation
The 4BAR Flex Q ILS may be mounted in any position; however, make sure adequate ventilation is provided around the product.

Rigging

• Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the product’s weight. (see the Technical Specifications)
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

Mounting Diagram

Operation

Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel.

menu option
< UP>| Press to scroll up the list of options or to find a higher value
< DOWN>| Press to scroll down the list of options or to find a lower value
< ENTER>| Press to activate a menu option or a selected value

Menu Map

Refer to the 4BAR Flex Q ILS product page on www.chauvetdj.com for the latest menu map.

DMX Mode

| 4Ch|

d 1–509

| 4-channel DMX mode
6Ch| 6-channel DMX mode
19Ch| 19-channel DMX mode
ILS Mode| iLS| iLS1–4| Sets ILS mode

Static Colors

|

C- –

| C 1–15| Static colors
C 16| 3000K color temperature
C 17| 4500K color temperature
C 18| 5600K color temperature
Programs| P- –| P 1–8| Automatic programs
Auto Speed| S- –| S. 1–100| Program speed for P 1–8
Dimmer| d- –| L. 1–255| Dimmer
Sound Mode| Snd| Snd1–8| Sound-active programs
Sensitivity| SEnS| u 0–100| Sets sound sensitivity

Custom Color Mixing

|

u- –

| r. 0–255|

Custom static colors

Combine red, green, blue, and amber

G. 0–255
b. 0–255
A. 0–255
S. 0–100| Strobe rate

Control Mode

|

SEt

| ir| on| Turns infrared on or off for footswitch or IRC-6 control
oFF
out| SLAV| Enable Master/Slave with other 4BAR Flex Q ILS products
dMX| Enable Master/Slave with legacy 4BAR products

DMX Linking
The 4BAR Flex Q ILS works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Configuration (DMX)
Set the product in DMX mode to control with a DMX controller.

1.  Connect the product to a suitable power outlet.
2.  Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.

DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If the starting address is set too high, access to some of the product’s channels could be restricted.
The 4BAR Flex Q ILS uses up to 19 DMX channels in a 19-Ch DMX mode, which defines the highest configurable address to 494.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:

1. Press repeatedly until 4Ch, 6Ch, or 19Ch shows on the display.
2. Press and d 1–509 will show on the display.
3. Use or to select the starting address.
4. Press .

D-Fi USB Connectivity
The 4BAR Flex Q ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet DJ. Simply set the product’s DMX Personality and DMX Address, set the DIP switch
D-Fi receiving/transmitting channel, plug it into the D-Fi USB port then set the product’s DMX Personality and DMX Address.

WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control / menu buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:

1. D-Fi USB
2. Wired DMX
3.  IRC-6 Remote Control
4.  Manual Digital Display/Menu Buttons

D-Fi USB Compatibility
The D-Fi USB can receive a DMX signal from the D-Fi Hub, the FlareCON Air 2, and other D-Fi USB products.

Configuration (D-Fi USB)

1. Set the DMX Personality and DMX address on the 4BAR Flex Q ILS.
2. Use the Chart provided to set BOTH:
   • the Channel, and then
   • The Receiving or Transmitting option.

D-Fi USB DIP Switch Channels

DMX Channel Assignments and Values
4Ch /6Ch/ 9Ch

–

| ****

–

| ****

1

| ****

Automatic Programs

| 000 ó 009| No function
010 ó 029| Auto program 1
030 ó 049| Auto program 2
050 ó 069| Auto program 3
070 ó 089| Auto program 4
090 ó 109| Auto program 5
110 ó 129| Auto program 6
130 ó 149| Auto program 7
150 ó 169| Auto program 8
170 ó 189| Auto program 9
190 ó 209| Auto program 10
210 ó 229| Auto program 11
230 ó 249| Auto program 12
250 ó 255| Sound-active program
–| –| 2| Dimmer| 000 ó 255| 0–100%
–| –| ****

3

| Strobe

(when Ch. 1 is 000 ó 009 )

| 000 ó 009| No function
010 ó 255| Strobe, slow to fast

–

| ****

–

| Program speed

(when Ch. 1 is 010 ó 249 )

| 000 ó 255| Program speed, slow to fast
Sound sensitivity

(when Ch. 1 is 250 ó 255 )

| 000 ó 010| Sound sensitivity off
011 ó 255| Sound sensitivity, low to high
1| 1| 4| Red 1| 000 ó 255| 0–100%
2| 2| 5| Green 1| 000 ó 255| 0–100%
3| 3| 6| Blue 1| 000 ó 255| 0–100%
4| 4| 7| Amber 1| 000 ó 255| 0–100%
–| –| 8| Red 2| 000 ó 255| 0–100%
–| –| 9| Green 2| 000 ó 255| 0–100%
–| –| 10| Blue 2| 000 ó 255| 0–100%
–| –| 11| Amber 2| 000 ó 255| 0–100%
–| –| 12| Red 3| 000 ó 255| 0–100%
–| –| 13| Green 3| 000 ó 255| 0–100%
–| –| 14| Blue 3| 000 ó 255| 0–100%
–| –| 15| Amber 3| 000 ó 255| 0–100%
–| –| 16| Red 4| 000 ó 255| 0–100%
–| –| 17| Green 4| 000 ó 255| 0–100%
–| –| 18| Blue 4| 000 ó 255| 0–100%
–| –| 19| Amber 4| 000 ó 255| 0–100%
–| 5| –| Dimmer| 000 ó 255| 0–100%
–| 6| –| Strobe| 000 ó 009| No function
010 ó 255| Strobe, slow to fast

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.

Static Colors
To run the 4BAR Flex Q ILS in Preset Color mode, follow the instructions below:

1. Press repeatedly until C– shows on the display.
2. Press .
3. Use or to select C 1–18.
4. Press .

Automatic Programs
To run the 4BAR Flex Q ILS in Automatic mode, follow the instructions below:

1. Press repeatedly until P– shows on the display.
2. Press .
3. Use or to select P 1–8.
4. Press .

Automatic Speed
To change the auto program speed, do the following:

1. Press repeatedly until S– shows on the display.
2. Press and S. _ will show on the display.
3. Use or to increase or decrease the speed.
4. Press .

Dimmer
To adjust the total output, do the following:

1. Press repeatedly until d– shows on the display.
2. Press and L. _will show on the display.
3. Use or to select from L. 1–255.
4. Press .

Sound-Active Mode
To run the 4BAR Flex Q ILS in sound-active mode, do the following:

1. Press repeatedly until Snd shows on the display.
2. Press .
3. Use or to select Snd1–8.
4. Press .

Custom Color Mixing
To custom mix a color, do the following:

1. Press repeatedly until u– shows on the display.
2. Press and one of the following will show on the display:
   • r. _ (red)
   • G. _ (green)
   • b. _ (blue)
   • S. _ (strobe rate)
3. Press to cycle through the color settings.
4. When the desired color shows on the display, use or to increase or decrease the color value.
5. Repeat steps 3 and 4 until the product outputs as desired

Wireless Footswitch Operation

The included wireless footswitch provides quick access to preset colors, color-change programs, and sound-activation through the 4BAR Flex Q ILS microphone.
To use the footswitch:

1. Connect the 4BAR Flex Q ILS to power. Turn the wireless footswitch on.
2. Press repeatedly until SEt shows on the display, and press .
3. Use or to select ir, and press .
4. Use or to select on, and press .
5. Press repeatedly until P– shows on the display, and press .
6.  Press pedal #3 to activate static color controls. When working, all the lights will begin in a static color and FOOt will appear on the Menu display.
7.  Use the chart below to activate the desired function.
   Pedal| Action| Function
   ---|---|---
   1

(Auto Programs)

| Tap pedal to activate, then tap to navigate to desired function| Auto programs 1–8
2

(Sound Mode)

| Press and hold| Sound-active programs

3

(Static Colors)

|

Tap

| Static colors C1–18
Auto snap program
Auto fade program
Press and hold| Auto fade program
4

(Blackout)

| Tap| Blackout
Press and hold| Fade to blackout

The 4BAR Flex Q ILS footswitch will work properly in any mode, with a maximum
unobstructed distance of 100 ft (30.5 m). You must turn on the ir setting from the 4BAR Flex
Q ILS and navigate to Auto mode before using the footswitch.

Footswitch Battery
The wireless footswitch uses a 9-volt battery located under the battery cover on the bottom of the product, which can be replaced when necessary.

Battery Replacement
To replace the battery in the wireless footswitch:

1. Turn the power switch to the Off position.
2. Remove the battery cover by removing 2 screws with a Phillips-head screwdriver.
3. Remove the old battery from the housing and unplug it from the leads.
4. Replace with a new 9-volt battery, ensuring that the positive (+) and negative (-) leads correspond to the correct electrodes on the battery.
5. Place the battery into the housing and cover with the battery cover.
6. Secure the battery cover with the 2 Phillips-head screws.
   Do NOT over-tighten the screws!

IRC-6 Infrared Remote Control

The 4BAR Flex Q ILS can be operated with the CHAUVET IRC-6.

6= C20

| 2= C16

7= C2

| 3= C17

8= C22

| 4= C18

9= C23

| 5= C19

0= C8

< +>| Increases values for controls as described above
< - >| Decreases values for controls as described above

The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is pressed, try pressing . You may have
inadvertently activated Black Out.

Master/Slave Mode (D-Fi USB)
The D-Fi USB allows a single 4BAR Flex Q ILS product (the “master”) to control the actions of one or more 4BAR Flex Q ILS products (the “slaves”) without the need of a DMX controller or DMX cables. The master (transmitter) product will be set to operate in standalone mode, while the slave (receiver) products will be set to operate in DMX mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.

Slave products:

1. Press repeatedly until 4-Ch shows on the display.
2. Press .
3. Use or to set the starting address to d 1.
4. Press .
5. Set the D-Fi USB to receive on a specific channel, 1–16.
6. Plug in the D-Fi USB.
7. Finish setting and connecting all the slave products.

Master product:

1. Set the master product to operate in standalone mode.
2. Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving on.
3. Plug in the D-Fi USB.
   • All products must be set to the same DMX personality, DMX address, and D-Fi channel.
   • Configure all the slave products before configuring the master to transmit.
   • Never connect a DMX controller to a D-Fi channel configured for Master/Slave operation because the controller may interfere with the signals from the master.

ILS Mode
ILS (Integrated Lighting System) provides 4 modes that synchronize with the GigBAR MOVE+ILS: Modes 1 and 3 synchronize with side 1 of the GigBAR MOVE+ILS, whereas modes 2 and 4 synchronize with side 2 of the GigBAR MOVE+ILS. When linked, effects will sync with the most similar effect on the selected side of the GigBAR MOVE+ILS: Kinta effects will sync with one of the kintas, moving heads will sync with one of the moving heads, and wash effects will sync with one of the pars. Laser effects will sync with the laser, and strobe effects will sync with the strobe effects regardless of ILS mode.
This product will synchronize with the par effects of the GigBAR MOVE+ILS, regardless of ILS mode. To set the 4BAR Flex Q ILS to respond to an ILS signal:

1. Press repeatedly until iLS_ shows on the display.
2. Use or to select from iLS1-4.
3. Press .

Maintenance

Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:

1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
   Always dry the transparent surfaces carefully after cleaning them.

Technical Specifications

Dimensions and Weight

(5.5 kg)

Note : Dimensions in inches rounded to the nearest decimal digit.

Power

Power cord plug

Light Source

| Edison (U.S.)| Local plug
Type| Color| Quantity| Power| Current| Lifespan
LED| Quad-color RGBA| 28| 3.5 W| 1.3 A| 50,000 hours
Photometrics|  |  |  |  |
Strobe Rate| Beam Angle| Field Angle| Illuminance @ 2 m
0 to 20 Hz| 14°| 23º| 2,353 lux (per pod)
Thermal|  |  |
Maximum External Temperature                Cooling System|

DMX

Returns

In case you need to get support or return a product:

• If you are located in the U.S., contact Chauvet World Headquarters.

• If you are located in the U.K. or Ireland, contact Chauvet U.K.

• If you are located in Benelux, contact Chauvet Benelux.

• If you are located in France, contact Chauvet France.

• If you are located in Germany, contact Chauvet Germany.

• If you are located in Mexico, contact Chauvet Mexico.

• If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetdj.com for distributors outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico.
  If you are located outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor of record and follow their instructions on how to return Chauvet products to them. Visit our website www.chauvetdj.com for contact details.

• Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.

• Before sending the product, clearly write the following information on a piece of paper and place it inside the box:

  • Your name
  • Your address
  • Your phone number
  • RMA number
  • A brief description of the problem

• Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended.
  Chauvet reserves the right to use its own discretion to repair or replace returned product(s).

Contact Us

• Chauvet World Headquarters

  • Address: 3360 Davie Rd. Davie, FL 33314
  • Voice: 954-577-4455
  • Fax: 954-929-5560
  • Toll Free: 800-762-1084
  • Voice: 844-393-7575
  • Fax: 954-756-8015
  • Email: chauvetcs@chauvetlighting.com
  • Website: www.chauvetdj.com

• Chauvet U.K.

• Address: Unit 1C

  • Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT
    Voice: +44 (0) 1773 511115 Fax: +44 (0) 1773 511110

  • Email: UKtech@chauvetlighting.eu

  • Website: www.chauvetdj.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>