EDiMAX GS-1005BE 5 Port 2.5 Gigabit Switch Installation Guide

: June 9, 2024
: EDIMAX

Table of Contents

EDiMAX GS-1005BE 5 Port 2.5 Gigabit Switch
Product Information
Hardware Installation
COPYRIGHT
Federal Communication Commission Interference Statement
EU Declaration of Conformity
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EDiMAX GS-1005BE 5 Port 2.5 Gigabit Switch

Product Information

The Edimax GS-1005BE equipped with five 2.5 Gigabit Ethernet ports is easy to setup and with no configuration or no Software needed. Additionally, if your network has a mix of legacy and modern computing capabilities, each port allows for 100Mbps standard Ethernet, 1000 Mbps Fast Ethernet, or 2.5G Gigabit Ethernet connections. This switch provides high-speed and reliable data transfer ideal for network connectivity in the home, small office, small-and- Medium business and enterprise environments. You can find all supporting documents from the link below or via QR Code: https://www.edimax.com/download

(Once you’ve visited the Edimax official website, please enter the model no. “GS-1005BE” into the search box to search for your product.)

Download
To select your product and find related download materials, enter the model number into the search box on the right side or follow the simple steps below: Feel free to contact us anytime if you need help or if you can’t find your product.

Package Contents
Before start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s):

Hardware Overview

No.	Description
1	LED (PWR, Link/ACT)
2	LAN Ports X5
3	Power Jack
Function	Color
---	---

LINK/ACT

| ****

Green /Amber

| On| Port is connected
Off| Port is disconnected or link failure
Flashing| Sending or receiving data.

PWR

| ****

Green

| On| Power on
Off| Power off

Note: LNK/ACT,

Green= Link at 2.5G
Amber= Link at 100/1000M

Hardware Installation

This section will guide you through the steps to set up the GS-1005BE.

Plug power adapter into a wall outlet.
NOTE : Ensure the “PWR” LED lights on Green.
Plug an Ethernet cable from the LAN port to the router.
NOTE : Ensure the “LAN” LED lights on Green or Amber.
Plug an Ethernet cable from the LAN port to any devices that have Ethernet port.

COPYRIGHT

Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes. The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

R &TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENTAND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.

EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.

EU Countries Not Intended for Use
None

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU

WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.

Declaration of Conformity

We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives.

Equipment : 2.5GbE 5-Port Gigabit Switch
Model No.: GS-1005BE

The following European standards for essential requirements have been followed:

Directives 2014/30/EU