ProBreeze PB-08 20L Dehumidifier Instruction Manual
- June 10, 2024
- ProBreeze
Table of Contents
- ProBreeze PB-08 20L Dehumidifier
- Product Information
- Model PB-08 20L Dehumidifier
- Product Usage Instructions
- IMPORTANT INSTRUCTIONS
- SAVE THESE INSTRUCTIONS!
- SPECIFICATIONS
- DEHUMIDIFIER BENEFITS
- FEATURES
- CONTROLS
- CLEANING & STORAGE
- DEFROSTING
- FCC STATEMENT
- RECYCLING AND DISPOSAL
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ProBreeze PB-08 20L Dehumidifier
Product Information
Model PB-08 20L Dehumidifier
- For indoor use only
- Normal, Low-power, High-power, and Laundry Modes
- Control Panel with various buttons and indicator lights
- Water tank with a capacity of 20L
- Continuous draining option with the water hose connector
- Humidity indicator light and temperature indicator
- Child Lock for safety
Product Usage Instructions
- Read the entire user manual carefully before using the dehumidifier.
- Place the dehumidifier in the desired location where it has access to a power outlet.
- Press the Power button to turn on the dehumidifier. The control panel will light up.
- Select the desired mode using the Mode button. Normal mode allows you to manually set both fan speed and target humidity percentage. Low-power mode automatically sets the fan speed to low, while High-power mode automatically sets it to high. Laundry mode is specifically for use in a laundry room when drying clothes. Use the Set % button to set the desired relative humidity (RH) between 30%-80% during normal dehumidification mode. The
%
indicator light will flash when changes are being made. The dehumidifier will turn off when the room reaches this target RH%. - Use the Speed button to set the dehumidifier power to high or low speed when in Normal Mode.
- Use the Timer button to set a turn-on or shut-off timer between 1-24 hours.
- Use the Child Lock button to lock the controls for child safety. Press and hold the button for 3 seconds to lock and unlock.
- If you want to use the dehumidifier without the dehumidifying function, press the Fan button. This will only run the fan.
- Monitor the humidity level using the Humidity Indicator light. This will give you an indication of the current air humidity.
- If you want to connect a hose for continuous draining, follow these steps: Remove water tank, insert the hose into the water hose connector, ensuring it is connected properly, ensure the hose end has a suitable drainage outlet (e.g. a drain or bucket), and slot the tank back in carefully.
- When the water tank is full, the Water Tank Full indicator light will turn on. Turn off and unplug the dehumidifier, remove the water tank, and empty it before replacing it back into the unit.
- When not in use, press the Display button to send the display to sleep. The unit will continue working but the lights will turn off.
- Save the user manual for future reference.
Note: For more information and advice on dehumidifiers and how to get the best use out of your unit, visit Pro Breeze’s Advice Blog at www.probreeze.com.
Thank you for choosing to purchase a product from Pro Breeze. Please read the entire manual carefully prior to first use and keep in a safe place for future reference.
IMPORTANT INSTRUCTIONS
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
When using electrical appliances, basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to persons,
including the following:
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE, OR INJURY TO PEOPLE, ALWAYS TURN THE APPLIANCE OFF, UNPLUG THE POWER CORD FROM THE ELECTRICAL OUTLET AND EMPTY THE WATER TANK BEFORE HANDLING, CLEANING OR SERVICING THE APPLIANCE.
- Read all instructions before using this appliance.
- Do not cover the appliance whilst in use.
- Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to person.
- Always unplug the appliance when not in use.
- Do not expose the appliance to direct sunlight, heat sources or extreme cold.
- Keep the appliance out of reach of children and pets.
- Do not leave children alone or unattended in the area where the appliance is in use.
- Children should be supervised to ensure that they do not play with the appliance.
- Cleaning and user maintenance shall not be made by children unless continuously supervised.
- Dispose of water held by the appliance. This water is not drinkable
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- When moving the appliance, ensure it is kept in an upright position.
- The appliance must have a minimum 50cm clearance around all sides.
- Never leave the appliance unattended while in use. Always turn the appliance off and disconnected from the power supply when not in use.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- Place the appliance on a flat, stable and dry surface and always keep the appliance in an upright position. Operating the appliance in any other position could cause a hazard.
- Never place anything on top of the appliance.
- Ensure that the mains supply (including voltage, frequency and power) complies with the rating label of the appliance.
- There may be trace of odour during the first few minutes of initial use. This is normal and will quickly disappear.
- Do not place the appliance against a wall or other appliances.
- Do not cover the appliance or restrict the air flow of the inlet or exhaust grills whilst in use.
- Do not cover, obstruct or push objects into the vents and opening of the appliance as this may cause an electric shock, fire or damage the appliance.
- Do not operate the appliance with wet hands.
- Do not use this appliance near water or in the immediate surroundings of a bath, shower or a swimming pool. Never place the appliance where it may fall into a bathtub or other water container.
- Do not allow water or other liquids to run into the interior of the appliance, as this could create a fire and/or electrical hazard.
- Do not use mechanical devices to accelerate the appliances defrosting process.
- Do not place the continuous drainage hose outside when the temperature falls below 1°C.
- This appliance is intended for indoor household use and similar applications. Do not use outdoors.
- Do not use the appliance near petrol, paints, flammable gases, ovens, or other heating sources.
- The mains cable should not hang down from the surface on which the appliance is placed in order to prevent the appliance from being pulled down.
- To avoid a circuit overload when using this appliance, do not operate another high-wattage appliance on the same electrical circuit.
- Always plug the appliance directly into a wall socket. Avoid using extension leads where possible as they may overheat and cause a risk of fire.
- Do not use this appliance with an external programmer, timer switch or any other device which would switch the appliance on automatically unless this has already been pre-built into the appliance by the manufacturer.
- Do not pull on the power cord. Never move, carry, or hang the appliance by the power cord.
- Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.
- Do not operate the appliance with the water tank removed.
- Ensure the mains cable is fully extended before use and arrange it so that it is not in contact with any part of the appliance.
- Do not operate the appliance with any safety guards removed.
- Do not operate the appliance if there are signs of damage to the appliance, power cord, or any of the accessories supplied. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
- Do not attempt to repair or adjust any electrical or mechanical elements in the appliance. Doing so may be unsafe and will void your warranty.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the appliance.
- Household use only.
SPECIFIC INFORMATION REGARDING R134A REFRIGERANT GAS
WARNING: THE APPLIANCE MUST BE INSTALLED, OPERATED AND STORED IN A ROOM WITH A FLOOR AREA LARGER THAN 4M2.
- This appliance contains 0.1kg (100g) of R134A refrigerant gas.
- R134A is a refrigerant gas that complies with the European directive on the environment.
- Do not puncture any part of refrigerant circuit.
- Be aware R134A refrigerant is odourless and does not have the odour normally associated with natural gas and propane tanks.
- Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
- The appliance must be placed in an area without any continuous sources of ignition such as open flames, gas, or electrical appliances in operation.
- Do not puncture and do not burn.
- If the appliance is installed, operated or stored in a non-ventilated area, the room must be designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
- The appliance must be stored in such a way as to prevent mechanical failure.
- Individuals who operate or work on the refrigerant circuit must have the appropriate certification issued by an accredited organisation that ensures competence in handling refrigerants according to a specific evaluation recognised by associations in the industry.
- Maintenance and repairs that require the assistance of other qualified personnel must be performed under the supervision of an individual specified in the use of flammable refrigerants.
SAVE THESE INSTRUCTIONS!
SYMBOLS EXPLAINED
SPECIFICATIONS
- • Product dimension: 12.6″ x 7.87″ x 22.8″
• Net Weight: 31.08lb
• Operating Capacity: Approx 50 pints per day at 30°C (86°F), 80%
• Cooling Element: Thermo-Electric Peltier Module
• Fan: Brushless Motor
• Power: 100-240~
• Max Tank Capacity: 5.5L
DEHUMIDIFIER BENEFITS
For advice on the benefits of dehumidifiers and how to get the best out of your unit, visit our Advice Blog at www.probreeze.com.
FEATURES
- Control Panel
- Water Tank
- Wheels
- Air Inlet
- Handle
- Water Hose Connector
- Air Outlet
- Power Connector
- Filter
- Humidity Indicator Light
CONTROLS
Indicator Lights
- Water Tank Full
- Defrost in Progress
- Fan Speed Low
- Fan Speed High
- Timer Set
- Temperature Indicator
- Humidity Set
These images are for reference only, please refer to your product. If you find
you’re missing any parts from your order, please contact our customer care
team by emailing help@probreeze.com for fast and
friendly help.
Power Button: Turns the dehumidifier on and off. Set %: Sets the desired
relative humidity (RH) between 30%-80% during normal dehumidification mode.
The ‘%’ indicator light will flash when changes are being made. The
dehumidifier will turn off when the room reaches this target RH%. To see the
current room temperature press and hold the SET % button for 5 seconds until
the temperature indicator light is on (°C).
Mode: Select between Normal, Low-power, High-power, and Laundry Modes.
Normal Mode: Allows manual setting of both fan speed and target humidity
%.
Low Power: Automatically sets the fan speed to low. The target humidity %
is disabled and the dehumidifier will run continuously.
High Power: Automatically sets the fan speed to high. The target humidity
% is disabled and the dehumidifier will run continuously.
Laundry: For use in a laundry room when drying clothes. The target
humidity % is disabled and the dehumidifier will run continuously.
Speed: Sets the dehumidifier power to high or low speed when in Normal
Mode.
Timer: Set a turn-on or shut-off timer, between 1-24 hrs.
- Setting a Turn-On timer: When the dehumidifier is off, tap the timer button until you reach the desired number of hours before you want it to turn on. The ‘Hr’ light will light up when a timer is set.
- Setting a Turn-Off timer: When the unit is on, tap the timer button until you reach the desired number of hours required before it turns off. The ‘Hr’ light will light up when a timer is set.
Child Lock: This button will lock the controls for child safety. Press
and hold the button for 3 seconds to lock and unlock.
Fan: Turns off the dehumidifying function so that only the fan runs.
Display: Press this button to send the display to sleep. The unit will
continue working but the lights will turn off.
Defrosting Light: Indicates when the unit is defrosting.
Humidity Indicator light: T his is an indicator of the current air
humidity:
- Red: Humidity more the 70%
- Green: Humidity between 50% -70%
- Blue: Humidity below 50%
CONNECTING THE WATER HOSE FOR CONTINUOUS DRAINING
For long-term use it is recommended to connect a hose for continuous drainage.
- Remove water tank.
- Insert the hose into the water hose connector, ensuring it is connected properly.
- Ensure the hose end has a suitable drainage outlet (e.g. a drain or bucket).
- Slot the tank back in carefully.
REMOVING AND EMPTYING THE WATER TANK
When the water tank is full the red indicator light will flash and the product will make a beeping sound. The dehumidifying function will automatically stop. Press the ON/OFF button to turn off the dehumidifier before removing the water tank.
- Gently pull the water tank out from the back of the dehumidifier.
- Use handle to empty the water tank.
- Once empty, slot the tank back in carefully.
CLEANING & STORAGE
WARNING: ALWAYS TURN THE APPLIANCE OFF, AND UNPLUG THE POWER CORD FROM
THE ELECTRICAL OUTLET BEFORE HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE INTERIOR OF
THE APPLIANCE, AS THIS COULD CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR SOLVENTS, AS THIS CAN DAMAGE
THE APPLIANCE.
- Do not attempt to clean the appliance in any other way than that detailed by the manufacturer.
- Clean the exterior surface of the appliance by wiping it with a soft, damp cloth. Dry the appliance with a soft, clean cloth.
- Always empty the water tank, and clean and dry the appliance when not in use to prevent mold.
Cleaning the water tank
- Remove and empty the water tank as per the instructions above.
- Clean the water tank with warm tap water and mild detergent (e.g. washing up liquid). Note: Do not use boiling water to clean the water tank.
- Ensure to remove any scale or deposits that have formed inside the water tank.
- Wipe all surfaces dry before placing the water tank back into the appliance.
Storage
- To store your product, we recommend using the original or a similar-sized box.
- Store the appliance in a safe, clean and dry place, away from direct sunlight and out of reach of children when not in use.
- The unit may need defrosting in temperatures less than 23°C – This will happen automatically and last up to 5 minutes. During this time, the dehumidifying function will stop and the defrost indicator will light up. Do not switch off while the unit is defrosting.
DEFROSTING
The unit may need defrosting in temperatures less than 16°C. This will happen automatically and last up to ten minutes. During this time, P1 will show on the display panel and the compressor will stop collecting water but the fan will continue to run at its prior setting. Do not switch off while the unit is defrosting.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RECYCLING AND DISPOSAL
Waste electrical and electronic products (WEEE), batteries, accumulators, and packaging should not be disposed of with general household waste. This is to prevent possible harm to the environment and human well-being, and to help conserve our natural resources. Most electrical products with a plug, battery, or cable can be recycled. Contact your local council, household waste disposal service, or the store where you purchased the product for information regarding the collection schemes in your area.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>