Mr Coffee 202160 Single Serve Frozen Iced and Hot Coffeemaker User Manual

Mr Coffee 202160 Single Serve Frozen Iced and Hot Coffeemaker

Product Information

Specifications

• Product Number: 202160
• Product Type: Single Serve Frozen, Iced and Hot Coffeemaker
• Website: www.mrcoffee.com

Introduction

The Single Serve Frozen, Iced and Hot Coffeemaker is designed to provide you with a convenient way to brew your favorite coffee beverages. This user manual will guide you through the proper usage and important safety precautions to ensure a safe and enjoyable experience.

Important Safeguards

When using electrical appliances, it is important to follow these safety precautions:

1. Read all instructions before using the coffeemaker.
2. Do not touch hot surfaces. Use handles or knobs to avoid burns.
3. To protect against electric shock, do not place or immerse the cord, plugs, or appliance in water or any other liquid.
4. This appliance is not intended for use by children or individuals with reduced physical, sensory, or mental capabilities. Close supervision is necessary when using the coffeemaker near children.
5. Always turn the appliance OFF and unplug it from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, firmly grasp the plug and pull it from the outlet. Never pull on the power cord.
6. Do not operate the appliance if the cord or plug is damaged or if the appliance malfunctions. Contact an Authorized Service Center for examination, repair, or adjustment. Do not attempt to replace or splice a damaged cord.
7. The use of attachments, including canning jars, is not recommended and may cause injury.
8. Do not use the coffeemaker outdoors.

Product Usage Instructions

Step 1: Preparing the Coffeemaker

1. Ensure the coffeemaker is placed on a stable and heat-resistant surface.
2. Check that the detachable power supply cord matches or exceeds the electrical rating of the appliance.
3. If the appliance is grounded, use a grounding type 3-wire cord for extension.

Step 2: Brewing Coffee

1. Fill the water reservoir with the desired amount of water.
2. Insert a coffee pod or ground coffee into the designated compartment.
3. Select the desired brewing strength and temperature settings, if applicable.
4. Close all lids securely.
5. Press the power button to start the brewing process.
6. Wait for the brewing cycle to complete.
7. Carefully open the lid and remove the brewed coffee.

Step 3: Cleaning and Maintenance

1. Always turn off and unplug the coffeemaker before cleaning.
2. Allow the appliance to cool down before cleaning.
3. Wipe the exterior surfaces with a damp cloth and mild detergent.
4. Remove and clean any removable parts, such as the brew basket, drip tray, and water reservoir.
5. Use a non-abrasive brush or sponge to clean stubborn stains.
6. Rinse all parts thoroughly and dry them before reassembling.

INTRODUCTION

Hey! Welcome to the Mr. Coffee Product Family and congratulations on the purchase of your new Mr. Coffee Frappe™ Coffeemaker. Your coffeemaker brings the coffeehouse home with the ability to make frozen, iced and hot coffee all in one machine. Easily create frozen coffee with the step-by-step guide and integrated measuring system on the blender. Then press Blend and a perfectly frosty frappe is ready in no time. To create refreshing iced coffee, use the tumbler to measure water and ice, and the scoop to measure coffee grounds.

The perfect ratio of hot, concentrated coffee is brewed over the ice, leaving you with flavorful iced coffee that’s never watered down. Your coffeemaker can also make single servings of pod-free hot coffee, giving you better taste and reducing waste. As always, Mr. Coffee creates the great tasting coffee and you make it special – add in your favorite flavorings and mix-ins to customize exactly how you like it!

Our number one goal is to give you great-tasting coffee every time. If you have any questions about your new Mr. Coffee Frappe™+ Coffeemaker, please contact us at 1-800-MRCOFFEE (1-800-672-6333) or visit us at www.mrcoffee.com.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock, do not place or immerse cord, plugs, or appliance in water or other liquid.
4. This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance. Keep the appliance and its cord out of reach of children.
5. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to an Authorized Service Center for examination, repair or adjustment. Do not attempt to replace or splice a damaged cord.
7. The use of attachments, including canning jars, is not recommended by the manufacturer and may cause a risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Always attach plug to appliance first, then plug cord into the wall outlet (for appliances with detachable cords). To disconnect, turn any control to the off position, then remove plug from wall outlet.
12. Do not use appliance for other than intended use.
13. All lids should be closed during use.
14. Scalding may occur if the lid is removed or brew basket door is opened during or immediately after the brewing cycles. Contents may be hot. Allow to cool before opening the lid.
15. Avoid contacting moving parts.
16. Flashing light indicates ready to operate (models with stand-by mode). Avoid any contact with blades or moveable parts.
17. For appliances with markings on plug blade: This appliance has important markings on the plug blade. The attachment plug or entire cordset (if plug is molded onto cord) is not suitable for replacement. If damaged, the appliance shall be replaced.
18. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
19. Blades are sharp. Handle carefully, especially when emptying the container and during cleaning.
20. Always hold container while operating the appliance. If the container should turn when the motor is turned ON, switch appliance OFF immediately and tighten the container in the threaded bottom.
21. Always operate blender with cover in place. Always wait until all moving parts have stopped before removing any lid or cover.
22. Do not blend hot liquids.
23. Always use appliance on a dry, stable, level surface. Never fill beyond the MAX fill line.
    • For appliances with service panels:
24. WARNING: To reduce the risk of fire or electric shock, do not remove this cover. no user–serviceable parts inside. repair should be done by authorized service personnel only.

SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

Polarized plug

This appliance has a polarized plug, (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature or modify the plug in any way. If the plug fits loosely into the AC outlet or if the AC outlet feels warm do not use that outlet.

• The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance;
• If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord; and
• The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over unintentionally.

POWER CORD INSTRUCTIONS

A short power-supply cord (or detachable power-supply cord) may be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If a long detachable power- supply cord or extension cord is used: Do not pull, twist or otherwise abuse the power cord.

PRODUCT NOTICES

1. Place the appliance on a hard, flat, level surface to avoid interruption of airflow underneath the coffeemaker.
2. Glass decanters only: Discard the decanter immediately if it is ever boiled dry.
3. Glass decanters only: Protect the decanter from sharp blows, scratches or rough handling.
4. Do not operate the appliance with an empty water tank.
5. Keep the area above the appliance clear during use, as hot steam will escape the appliance.

GET TO KNOW

GET TO KNOW YOUR SINGLE SERVE COFFEEMAKER & BLENDER

1. Dip tray: helps keep countertop tidy and free from mess. Clean after a few uses to prevent any overflow
2. Dip tray cover:  hand wash only
3. Over ice button: press to brew refreshing single servings of iced coffee
4. Hot brew button : press to brew flavorful single servings of hot coffee
5. Blender mount: with locking system to ensure blender is secure
6. Brew spout
7. Lid
8. Showerhead
9. Reusable coffee filter:  is dishwashable (ultra durable gold tone filter available in select units)
10. Brew basket:  insert filter filled with grounds here
    • GET TO KNOW YOUR SINGLE SERVE COFFEEMAKER & BLENDER
11. Blender base:  attaches to blender mount
12. Blender blades
13. Blender jar:  is dishwaher safe
14. Blender lid
15. Blender measuring cap: with 1 oz, 2 oz, 3 oz and ¼ cup measurements for creating delicious frappes
16. Coffee ground scoop:  dual sided for measuring iced or hot coffee grounds
17. Tumbler:  is 22 oz. double-wall insulated and BPA-free, handwash only
18. Tumbler lid: handwash only
19. Tumbler straw:  handwash only

CLEAN COFFEEMAKER BEFORE FIRST USE

Just follow these simple steps:

1. Wash the blender jar, blender lid, blender measuring cap, tumbler, tumbler lid, straw, coffee filter, coffee scoop and brew basket in a mixture of mild detergent and water. Rinse each thoroughly.
2. Fill tumbler with water to the water line and pour into reservoir. Replace brew basket in position and nylon filter (or paper 5-cup basket style paper filter) into brew basket.
3. Position tumbler under brew spout, plug in unit and press HOT BREW.
   • Note: the unit is on when the LED is lit.
4. When brewing is complete, discard water from tumbler and rinse tumbler thoroughly with clean water.
5. You Mr. Coffee Frappe™ Coffeemaker is now ready for use!

DISHWASHER SAFE PARTS OF YOUR COFFEEMAKER

To thoroughly clean your coffeemaker, you can put the following parts into the top-rack of the dishwasher

1. Blender jar
2. Reusable coffee filter
3. Brew basket

CAUTION: THE ELECTRICAL BASE, POWER CORD AND PLUG ARE NOT DISHWASHER SAFE AND SHOULD NEVER BE IMMERSED IN WATER OR OTHER LIQUIDS.

LET’S MAKE COFFEES

LET’S MAKE FROZEN COFFEE!

1. Plug the coffeemaker in. Press power button. It will blink slowly in standby for brew or blend.
2. Fill the blender jar 13 to the “WATER” marking with clean, filtered water.
3. Lift the lid 7 of the unit and pour the water into the reservoir. 6
4. Place the reusable coffee filter 9 (or standard 5-cup basket-style paper filter) into the brew basket. 10
5. Using the ICED side of the coffee scoop 16 pour 2 scoop of grounds into the reusable coffee filter 9 . Close the lid. 7
6. Fill the blender jar 13 with milk to the milk line (about 2 oz of milk).
7. Fill the blender jar 13 with ice cubes to the “ICE” marking.
8. Place the blender jar 13 full of ice and mix-ins under the brew spout 5
9. Press the “OVER ICE” button 3 – ensure the LED is illuminated.
10. Wait 3-4 minutes for brewing to complete. Once dripping slows and stops, grab blender jar 13 from underneath the spout 5 . Note: a few sparse coffee drips may come from the drip spout post brew – the drip tray 1 will catch these and keep your countertop mess free.
11. Pour desired syrups, flavorings or mix-ins into the blender 13 . Sweet tips:
    • Syrup or sugar of some kind greatly impacts the frosty consistency of the frappe. We recommend following one of our favorite recipes in the recipe book!
    • Use the blender cap as a measuring device to measure 1 tbsp, 2 tbsps., 3 tbsps., or 1/4 cup.
12. Place the blender lid 14 on the blender jar 13 . Place the blender jar on the blender mount. Twist handle to the left to lock into place.
13. Press the “BLEND” button. The blender will automatically blend your frappe to the perfect consistency.
14. When blending is complete, remove lid 14 and pour your frappe into the reusable tumbler 17 or separate drinking vessel.
15. Insert the straw 19 in lid, 18 place on tumbler and enjoy!

LET’S MAKE ICED COFFEE!

1. Plug the coffeemaker in. Press power button. It will blink slowly in standby for brew or blend.
2. Fill the tumbler 17 to the “WATER” marking with clean, filtered water.
3. Lift the lid 7 of the unit and pour the water into the reservoir. 6
4. Place the reusable coffee filter 9 (or standard 5-cup basket-style paper filter) into the brew basket. 10
5. Using the ICED side of the coffee scoop 16 , pour 1 scoop of grounds into the reusable coffee filter 9 . Close the lid. Note: if you want a bolder cup of iced coffee, you can use 1 1/2 – 2 scoops of grounds.
6. Fill the tumbler 17 with large ice cubes to the “ICE” marking.
7. Place tumbler full of ice under drip spout 5 and press the “OVER ICE” button – ensure the LED is illuminated.
8. Wait 3-4 minutes for brewing to complete. Once dripping slows and stops, grab tumbler from underneath the spout. 5 Note: a few sparse coffee drips may come from the drip spout post brew – the drip tray 1 will catch these and keep your countertop mess free.
9. Add in your favorite coffee mix-ins for coffee just how you like it.
10. Insert the straw 19 in lid, 18 place on tumbler 17 and enjoy!

NOTE

• Immediately after brewing, the heater thermostat needs to cool down to be ready for the next brew.
• Button indicator light may flash when pressing “HOT BREW” or “OVER ICE;” wait a few more seconds for heater to cool off before pressing again.

LET’S MAKE HOT COFFEE!

1. Plug the coffeemaker in. Press power button. It will blink slowly in standby for brew or blend.
2. Grab desired coffee cup or mug and fill with as much water as you would like coffee.
   • Tip: Taller coffee mugs work best to avoid any splashing during brewing.
3. Pour water into the reservoir 6 . Observe how much water your poured on the water ladder. Note: do not pour above 16 oz. max fill line as water reservoir will overflow.
4. Place reusable coffee filter 9 in brew basket 10 .
5. Using the HOT side of the coffee scoop 16 , measure coffee grounds that correspond to amount of water poured.
6. Pour coffee grounds into reusable coffee filter 9 .
   • Tip: ensure grounds to not spill into water reservoir when filling coffee filter. Removing coffee filter to fill with grounds can help prevent accidental spills into the reservoir 6 .
7. Close the lid 7 . Note: if you prefer bolder hot coffee, you can use an extra 1/2 – 1 scoops of coffee grounds.
8. Place the mug that was used to measure water underthe drip spout 5 . Press “HOT BREVV” button 4 .
9. Add in your favorite coffee mix-ins for coffee just how you like it. Enjoy!

FAQ

Why does the ICED coffee still brew HOT?

The Mr. Coffee Frappe™+ Coffeemaker brews the perfect ratio of hot, concentrated coffee over ice to create flavorful frozen and iced coffee! This process maximizes flavor extraction and leaves you with a refreshing cup of iced coffee every time. Our precise measurements of water, coffee grounds and ice ensure that your iced coffee is always flavorful and never watered down.

My frappe didn’t blend properly, what’s wrong?

Sorry about this! There could be a few causes for this:

1. There might be too much ice. Only add ice to the line on the blender jar. When using smaller sized ice cubes, you may need to use slightly less ice.
2. There might not be enough liquid. Ensure that water is filled to the water line before pouring into the reservoir or try adding more milk to improve consistency.
3. There might not be any sugar to help consistency while blending. We have found that syrup or sugar of some form greatly helps blending texture and consistency. Try one of our favorite recipes in the included recipe book!

The “BLEND” button didn’t blend my frappe all the way, what should I do?

• If you desire additional blending, simply press the “PULSE” button a few times and the blender will pulse as you hold down the button.

My iced or hot coffee isn’t strong enough for my taste – what now?

• No problem – everyone’s tastes are different! Try adding an extra ½ – 1 scoop of coffee grounds to the reusable filter for a bolder cup of coffee.

Is the tumbler dishwasher safe?

• No, the tumbler, lid and straw should be hand-washed only.

Why is there no ice left in my cup after brewing iced coffee?

• Try using bigger ice cubes when making your iced coffee – these will melt slower and give you ice in your drink for longer!
• Also be sure you have filled your tumbler all the way to the “ICE” marking.

Why are there coffee grounds in my coffee?

• You may have over-filled your reusable coffee filter with coffee grounds, and they could have spilled over the top.
• Although this is uncommon, try using a little less grounds next time and that should solve this problem!

Can I use a different tumbler or cup for making iced coffee?

• Sure thing! Just ensure you keep the same ratio of water-ground-ice to create the best tasting iced coffee!

REPAIRS AND WARRANTY INFORMATION

REPAIRS

If your coffeemaker requires service, do not return it to the store where you purchased it. All repairs and replacements must be made by Sunbeam or by an authorized MR. COFFEE® Service Center. If you live in the U.S. or Canada, please call us at the following toll-free telephone numbers to find the location of the nearest authorized service center: U.S. 1-800-MR COFFEE (1-800-672-6333). You may also visit our website at www.mrcoffee.com for a list of service centers.

To assist us in serving you, please have the coffeemaker model number and date of purchase available when you call. The model number is on the bottom of the coffeemaker. We welcome your questions, comments or suggestions. In all your communications, please include your complete name, address and telephone number and a description of the problem. Visit our website at www.mrcoffee.com and discover the secret to brewing the perfect cup of coffee. You will also find a rich blend of gourmet recipes, entertaining tips and the latest information on MR. COFFEE® products.

WARRANTY INFORMATION

1-YEAR LIMITED WARRANTY

Sunbeam Products, Inc warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty from Sunbeam. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt.

Proof of purchase is required to obtain warranty performance. Sunbeam dealers, service centers, or retail stores selling Sunbeam products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than Sunbeam or an authorized Sunbeam service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the Limits on Sunbeam’s Liability?

Sunbeam shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. Sunbeam disclaims all other warranties, or conditions or representations, express, implied, statutory or otherwise.

Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for damages arising from any tort, including negligence or gross negligence, or fault committed by Sunbeam, its agents or employees or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

• If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-672-6333 and a convenient service center address will be provided to you.

USER MAINTENANCE

• This appliance has no user serviceable parts. Any servicing beyond that described in the Cleaning Section should be performed by an Authorized Service Representative only.
• See warranty available online.

SERVICE MAINTENANCE AND WARRANTY

Service Maintenance and Warranty can be found online at www.mrcoffee.com or call us toll-free at the Consumer Service Department, 1-800-MR COFFEE (1-800-672-6333).

2020 Sunbeam Products, Inc. All rights reserved. Distributed by Sunbeam Products, Inc.
Boca Raton, Florida 33431. Made in China. SPR-150221-037P

www.mrcoffee.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>