COLORKINETICS Blast Powercore gen5 eW Instruction Manual
- June 9, 2024
- COLORKINETICS
Table of Contents
Blast Powercore gen5 eW
Instruction Manual
4000 K, 100 – 277 VAC, 60° spread lens, Black housing
Blast Powercore gen5 eW
Exterior customizable luminaire with single temperature white light
Blast Powercore gen5, eW high-performance LED luminaires provide a high- intensity wash of white light with simplified installation. Blast Powercore gen5 offers a range of accessories that allow for customizable beam angles for floodlighting, spotlighting, wall washing, and grazing, along with the efficiency and costeffectiveness of Powercore technology in a rugged die-cast aluminium housing.
- Expands customization with a wide range of new accessory options. In addition to the native 6° lens, five different spread lenses can customize the luminaire to produce 20°, 40°, 60°, 80°, and 10° x 40° (asymmetric) beam angles. Three housing color choices (black, gray, and white)—plus the option to add or combine a louver, rock guard, full glare shield, and half glare shield—create new aesthetic possibilities for designers and architects.
- Meets ASTM B117 standard for > 1,500 hours of corrosion resistance and ANSI C136.31-2010 standard with a 3G vibration rating.
- Improves durability with new flat lens that prevents water from pooling into the luminaire, keeping the LEDs protected and secure over the course of a luminaire’s lifetime.
- Integrates patented Powercore technology that controls power output to luminaires directly from line voltage—rapidly, efficiently, and accurately.
- The Color Kinetics Data Enabler Pro merges line voltage with control data and delivers them to luminaires over a single standard cable, dramatically simplifying installation and lowering total system cost.
- Universal power input range of 100 to 277 VAC.
- Precision Dimming—Smooth dimming down to 1% with optional Data Enabler Pro and digital control interface.
- Works seamlessly with the complete Color Kinetics line of controllers, including ColorDial Pro, iPlayer 3, and Light System Manager – as well as third-party controllers.
For detailed product information, please refer to the Blast Product Guide at https://www.colorkinetics.com/global/products/essentialwhite/blastpowercore- gen5-ew
Specifications
Due to continuous improvements and innovations, specifications may change without notice.
| Output | 4000 K |
|---|---|
| Color Temperature* | 60° |
| Beam Angle | 2,861 |
| Lumens † | 62 |
| Efficacy (lm/W) | 81.7 |
| CRI |
Electrical
Input Voltage| 100 to 277 VAC, auto-ranging, 50/60 Hz
Power Consumption
(Maximum at full output, steady state)| 46.2 W
Power Factor
Surge Limits
¶| 0.9 @ 120 VAC, 0.85 @ 277 VAC
2 kV maximum differential (L to N)
4 kV maximum common (L to Gnd or N to Gnd)
For additional Surge Protection Requirements for LED Lighting Systems, please
refer to www.colorkinetics.com/KB/surge-protection.
Certification and Safety
| Approbation | UL/cUL, FCC Class B, CE, PSE, CQC, RCM, EAC, UA |
|---|---|
| Environment | Dry/Damp/Wet Location, IP66 |
For additional Energy Efficiency Class Information, please refer to https://colorkinetics.helpdocs.io/article/cviis2p8qq.
- Correlated color temperature (CCT) complies with ANSI C78.377-2008 for the chromaticity of solid state lighting products.
- Correlated color temperature (CCT) complies with ANSI C78.377-2008 for the chromaticity of solid state lighting products.
† Lumen measurement complies with IES LM-79-08 testing procedures.
‡ Refer to https://colorkinetics.helpdocs.io/article/to07h0er3f for more information about dimming.
§ Lxx = xx% lumen maintenance (when light output drops below xx% of initial output). All values are given at B10, or the median value where 90% of the LED population is better than the reported or calculated lumen maintenance measurement.
¶ Minimum surge limits per IEC 61547, tested in accordance with IEC 61000-4-5.
†† When mounting to a junction box, the Color Kinetics wiring compartment accessory must be used to maintain a 3G vibration rating.
¶¶ Lumen maintenance figures are based on lifetime prediction graphs supplied by LED source manufacturers. Whenever possible, figures use measurements that comply with IES LM-80-08 testing procedures. In accordance with TM-21-11, Reported values represent the interpolated value based on six times the LM-80-08 total test duration (in hours). Calculated values represent time durations that exceed six times the total test duration.
Dimensions
Photometrics 4000 K, 60° spread lens
Photometric data is based on test results from an independent NIST traceable
testing lab. IES data is available at
www.colorkinetics.com/global/support/ies.
| Beam Angle | 60° |
|---|---|
| LED | 4000 K |
| Lumens | 2,861.00 |
| Efficacy (lm/W) | 62 |
Luminaire and Accessories
| Luminaire | Item Number | Item 12NC |
|---|
Blast Powercore gen5, eW, 4000 K, 100 – 277 VAC, Black housing
Luminaire only. Values in this specification sheet represent both the luminaire
and spread lens
combined. Spread lens available below in Associated Part.| 523-000110-05|
9.124E+11
Associated Parts| |
60° Spread lens
Trim Ring required for mounting. Must be ordered separately.| 120-000185-10|
9.124E+11
Accessories
Trim Ring, Black| 120-000185-01| 9.124E+11
Louver, Black| 120-000185-05| 9.124E+11
Rock Guard, Black| 120-000185-07| 9.124E+11
Half Glare Shield, Black| 120-000185-14| 9.124E+11
Full Glare Shield, Black| 120-000185-03| 9.124E+11
Wiring Compartment UL/cUL, Black| 106-000011-30| 9.10504E+11
Wiring Compartment CE, Black| 106-000011-40| 9.10504E+11
Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst
Architectural, and Vaya Flood. Short, gray| 120-000206-00| 9.124E+11
Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst
Architectural, and Vaya Flood. Medium, gray| 120-000206-01| 9.124E+11
Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst
Architectural, and Vaya Flood. Long, gray| 120-000206-02| 9.124E+11
Power Supplies
Data Enabler Pro (required to digitally dim unit), 3/4 in / 1/2 in NPT (U.S.
trade size conduit)| 106-000004-00| 9.10504E+11
Data Enabler Pro (required to digitally dim unit), PG21/PG13 (metric size
conduit)| 106-000004-01| 9.10504E+11
© 2022 Signify Holding. All rights reserved. Specifications are subject to
change without notice.
No representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed.
Color Kinetics
https://www.colorkinetics.com/global/products/essentialwhite/blast-powercore-
gen5-ew
References
- IES Files | Color Kinetics
- Understanding Surge Protection For LED Lighting Systems - Knowledgebase
- Installation Tools | Color Kinetics
- Color Kinetics Energy Label information - Knowledgebase
- Thermal protection and Color Kinetics luminaires - Knowledgebase
- Dimming of Essential White (eW) luminaires - Knowledgebase
- Color Kinetics Official Website | Homepage
- Blast Powercore gen5, eW | Color Kinetics
- Blast Powercore gen5, RGBW | Color Kinetics