Mr. Coffee IDS57-RB Electric Coffee Grinder Operating Instruction

June 9, 2024
Mr. Coffee

Mr.Coffee-logo

Mr. Coffee IDS57-RB Electric Coffee Grinder

Mr.Coffee-IDS57-RB-Electric-Coffee-Grinder-Product

Enjoy these Features

  • Round stainless steel grinding chamber grinds more evenly than oval chambers.
  • Spacious chamber grinds enough beans for 12 cups of coffee.
  • Carefully designed Safety Switch protects you by preventing operation unless the lid is properly in place.
  • Convenient Deep Lid lets you transfer freshly ground coffee directly to your brewer.

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed including the following:

  1. READ ALL INSTRUCTIONS.
  2. To protect against the risk of electrical shock, do not put the coffee mill in water or other liquid.
  3. Close supervision is necessary when any appliance is used by or near children.
  4. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
  5. Check the stainless steel bowl for the presence of foreign objects before using it.
  6. Do not contact moving parts.
  7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, is dropped, or is damaged in any manner. Return the appliance to the nearest authorized service center for examination, repair, or electrical or mechanical adjustment.
  8. The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electrical shock or injury.
  9. Do not use outdoors.
  10. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
  11. This product is designed FOR HOUSEHOLD USE ONLY, not for commercial or industrial use.
  12. PRECAUTIONS
    • Do not remove the Cover until the blade has Complehiy stopped.
    • Do not attempt operation without the cover being in place.
    • Do not immerse the motorized base or blade in liquid, or place in the dishwasher.
    • Damage to the unit will occur if submerged in liquid. Only the transparent top cover may be immersed.
    • Do not operate this machine continuously for more than 4 batches. Allow the machine to cool down for 10 minutes after every 4 batches.
    • Do not attempt to chop ice.
      This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

Diagram of Parts

FIGURE A

Introduction

Unlock the fresh ground flavor of roasted new MR. COFFEE coffee mill. For the best results, please read the following instructions before you begin using this appliance.

  1. Before you plug in your coffee mill, wipe the stainless steel grinding bowl, and blades and cover it with a lint-free cloth.
  2. Use this coffee mill to grind only coffee beans. Residue from grinding other foods will combine with the delicate oils of the coffee beans and affect the flavor of your coffee.

How to Grind The Beans

Remove the cover and fill the grinding bowl with coffee beans according to the following chart:

COFFEE MEASUREMENT CHART

BEAN QUANTITY = GROUND COFFEE = CUPS OF COFFEE
tablespoons/coffee  scoops in tablespoons 5 oz. cups
3 tbls.              1 l/2 scoops 3 tbls. 2 cups
5 tbls.                 2 1/2 scoops 5 tbls. 4 cups
6 tbls.                   3 Scoops 6 tbls. 6 Cups
8 tbls.                4 scoops 8 tbls. 8 Cups
10 tbls.                5 scoops 10 tbls. 10 cups
11 tbls.            5 l/2 scoops 11 tbls. 12 cups
  1. Note: This coffee mill grinds up to 11 tablespoons of whole coffee beans.

  2. Place the cover on the coffee mill.

  3. Plug-in unit

  4. Hold the cover firmly into place (Figure B.) Be sure that the safety switch is in its track to operate this unit.

  5. Press down on the safety switch according to the following grind time chart

  6. When the desired grind has to be obtained, release the safety switch and wait 10 seconds for the blades to stop. DO NOT REMOVE THE COVER UNTIL THE BLADES COME TO A COMPLETE STOP

  7. Unplug the unit. With one hand securing the cover, turn the coffee mill upside down and tap the cover lightly to insure that all of the coffee grounds have fallen into the cover.

  8. While the unit is still upside down, carefully remove the cover filled with the ground coffee and transfer the ground to your coffeemaker.

TIME CHART FOR GRINDING COFFEE BEANS

TYPE OF GRIND LEVEL  TABLESPOON GRIND TIME
Perc/Regular     Grind 11 9 seconds
Drip Grind 11 15 seconds
Espresso Grind 6 12 to 15 seconds

For smaller batches of beans use less grind time.

Grinding Tips

  1. You’ll need no more than 30 seconds to produce any coffee grind you desire

  2. Your coffee mill needs to cool off after 60 seconds of use. This cooling-off period protects your ground coffee from becoming overheated before it’s brewed

  3. Coffee grounds left in your coffee mill can become stale and affect the flavor of freshly ground coffee. Avoid this by removing any leftover coffee grounds from the
    grinding bowl.

  4. Don’t grind the coffee too fine. Paper coffee filters can clog and cause the water and grounds to overflowing.

  5. Vary the grinding time to suit your tastes and the type of beans you grind.

Cleaning

  1. Unplug your coffee mill.
  2. DO NOT PLACE THIS COFFEE MILL IN WATER. DO NOT IMMERSE THE BLADES OR MOTOR BASE IN WATER.
  3. Remove the coffee mill cover and wash in warm sudsy water. The cover IS not dishwasher safe.
  4. Use a clean cloth or paper towel to remove any remaining grounds from the grinding bowl.
  5. Be sure to clean your coffee mill completely after each use.
  6. Do not try to oil or sharpen the blades. The blades are permanently lubricated and never need sharpening.
    ANY SERVICING OF THIS APPLIANCE SHOULD BE PERFORMED ONLY BY AN AUTHORIZED MR. COFFEE SERVICE CENTER

If Service is Required

Please do not return this appliance to your store. For additional service information, please call 1-800-MR COFFEE (l-800-672-6333; U.S.A. and Canada) Our office hours are 8:30 AM – 5:00 PM Eastern Time Zone Monday thru Friday Please include the model number in all communications.

Limited Warranty

Mr. Coffee warrants to the purchaser that the Coffee Mill by Mr. Coffee”, (except for the cord set) is free from manufacturer’s defects in material and workmanship for one year from the date of original purchase when used in compliance with directions as outlined in the manufacturer’s instructions, which will constitute reasonable and necessary maintenance by the purchaser.

In case of manufacturer defects in material or workmanship, Mr. Coffee agrees to repair (remedy) a defective coffee mill without charge. The purchaser’s exclusive remedy against Mr. Coffee shall be for the repair or replacement of a defective Mr. Coffee product.

All repairs must be made by an authorized Mr. Coffee Service Center. To locate a Mr. Coffee Service Center, call l-800-MR COFFEE (l-800-672-6333). Mr. Coffee shall not be responsible for any repairs performed at any facility which is not an authorized Mr. Coffee Service Center.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Any implied warranty is limited in duration to the one year provided in this, the only, expressed warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

In no event shall Mr. Coffee be responsible for incidental or consequential damages; damage due to misuse or the use of any unauthorized attachment; nor damage caused by the use of an electrical circuit not specified on the Mr. Coffee product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

FAQs

How Long Do You Grind Coffee Beans?****

It usually takes less than 30 seconds to grind coffee beans in an electric grinder. However, the secret to perfectly ground coffee isn’t time but a combination of grind size and uniform grounds.

How Long Does a Coffee Grinder Last?****

The life expectancy of your coffee grinder depends on the brand, coffee beans used, roast degree, and how often you grind coffee in it. A good quality grinder that is used regularly should last you for about 5-10 years.

Should you wash the electric coffee grinder?****

If you don’t clean your grinder, the first thing you’ll notice is that rancid taste, which will get worse over time. But eventually, grinders that continue to collect oils and old grounds can clog or slow down the speed of your burrs.

How often do you clean an electric coffee grinder?****

You can clean a blade grinder weekly if you use it every day. You can clean a burr grinder once a month. If you wipe down the grinder with a cloth after every use, this will make your deep cleaning of the grinder much easier

Why do we use an electric grinder?****

The primary purpose of an angle grinder is to grind metal. It achieves this with the use of abrasive grinding discs that come in a range of materials, like aluminum, carbide, and diamond-tipped discs. Attach a grinding disc and turn on the grinder to start the disc spinning rapidly.

How do you grind coffee without electricity?****

You can use a blender or food processor if you don’t want to grind them by hand. To grind beans by hand, use a hammer, mortar and pestle, hand mincer, or rolling pin. With each of these methods, you can make the grind as fine or coarse as you want.

How many watts should a coffee grinder be?****

Most coffee grinders are advertised with a power rating listed in watts. Generally speaking, premium coffee grinders usually come in at around 300 watts. By contrast, more affordable grinders are typically closer to 150 watts. Nevertheless, it is important to remember that power isn’t the be-all and end-all.

How hot does a coffee grinder get?****

At the start of service, it can be as low as 10ºC (68ºF), while peak times can produce grind temperatures over 50ºC (122ºF). Grind temperature matters largely due to its impact on espresso shot times. As grind temperatures increase, shot times shorten, which accelerates the coffee’s extraction.

How do you maintain an electric grinder?****

Keep your equipment clean. After each use of the grinder, disconnect the power and brush or wipe off dust and sludge (if grinding wet or using a built-in misting system). Tip back the grinder, remove the tooling, and wipe off the heads. Inspect plates and shroud, and make sure screws and bolts are in place and tightened.

How do you clean an electronic coffee grinder?****

Run the cleaning tablets through the grinder until it is empty. Then run all the coffee through the grinder on the same setting. Use the barely damp side of the rag to wipe out any yellow specks from the hopper, bin, and body of your machine. Then use the dry side of the rag to dry it.

Download The PDF Link;Mr. Coffee Electric Coffee Grinder pdf

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals