Pulsar Monocular 3×20 B 71014 Attachment for Krypton And Proton Night Master User Manual
- June 15, 2024
- Pulsar
Table of Contents
Pulsar Monocular 3×20 B 71014 Attachment for Krypton And Proton Night
Master
Specifications
Model| SKU| Magnification| Lens Diameter (mm/inch)| Field-of-view (deg)| Eye
Relief (mm/inch)| Eyepiece Focusing Range (Diopter)| Dimensions (mm/inch)|
Weight (kg/oz)
---|---|---|---|---|---|---|---|---
3×20 B| 71014| 3x| 20/0.79| 15| 20/0.79| –| 95x45x51 / 3.74×1.77×2| 0.1 / 3.53
Package Contents
- Monocular Pulsar 3×20 B
- Carrying Case
- Neck Strap
- Quick Start Guide
- Warranty Card
- Lens-Cleaning Cloth
- Allen Key
Monocular Installation
- Align the protrusions on the monocular(1) on the side of its lens with the grooves of the mount (2) of the thermal imaging module.
- Turn the monocular clockwise to secure it on the thermal imaging module. The recommended position of the clamping screw (3) is at the bottom.
- Turn on the thermal imaging module.
- Adjust the eyepiece diopter ring (4) until the symbols in the display are sharp.
- Loosen the screw(3) with an Allen key S3.
- Align the display to the centre of the image in the monocular by tilting the thermal imaging module in the required directions.
Legal Compliances and Disclaimers
- The manufacturer reserves the right at any time, without mandatory prior notice to the Customer, to make changes to the package contents (subject to the applicable laws, if any), design and characteristics that do not impair the quality of the Product.
- For technical support, please contact support@pulsar-vision.com.
FAQ
- Q: Where can I find answers to frequently asked questions about the devices?
- A: You can find answers to frequently asked questions about the devices in the FAQ section.
Description
- The Monocular Pulsar 3×20 B converts Krypton and Proton devices into handheld thermal imaging monoculars with 3x magnification.
- The monocular is installed on the thermal imaging module without the use of an additional adapter.
Specifications
Model 3×20 B
- SKU: 71014
- Magnification, х: 3
- Lens diameter, mm/inch: 20/0.79
- Field-of-view, deg: 15
- Eye Relief, mm/inch: 20/0.79
- Eyepiece Focusing Range, Diopter: ±5
- Dimensions, mm/inch: 95x45x51 / 3.74×1.77×2
- Weight, kg/oz: 0.1 / 3.53
Package Contents
- Monocular Pulsar 3×20 B
- Carrying Case
- Neck Strap
- Quick Start Guide
- Warranty Card
- Lens-Cleaning Cloth
- Allen Key
Monocular Installation
- Align the protrusions on the monocular(1) on the side of its lens with the grooves of the mount (2) of the thermal imaging module.
- Turn the monocular clockwise to secure it on the thermal imaging module. The recommended position of the clamping screw (3) is at the bottom (see Figure).
- Turn on the thermal imaging module.
- Adjust the eyepiece diopter ring (4) until the symbols in the display are sharp.
- Loosen the screw(3) with an Allen key S3.
- Align the display to the centre of the image in the monocular by tilting the thermal imaging module in the required directions.
- Lock the monocular in the chosen position by tightening the screw(3) until it stops (clamping force – 2.5 Nm/ 22.13 in-lbs).
- To remove the monocular, turn it counterclockwise and disconnect from the thermal imaging module.
Legal Compliances and Disclaimers
- The manufacturer reserves the right at any time, without mandatory prior notice to the Customer, to make changes to the package contents (subject to the applicable laws, if any), design and characteristics that do not impair the quality of the Product.
- For technical support please contact support@pulsar-vision.com.
- Answers to frequently asked questions about the devices can also be found in the FAQ section.
References
Read User Manual Online (PDF format)
Loading......