innocn 27A1S 4K Monitor Installation Guide
- June 15, 2024
- INNOCN
Table of Contents
27A1S
Quick Installation Guide
Before using this product, please read this User Manual carefully and keep it well
Precautions
- Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
- Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
- Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
- Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
- The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
- If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
- Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or electric shock.
- Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
- Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
- Do not pull or twist the power cable forcedly.
- There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.
Installation of base
Wall-mounted Installation
Adjustment of monitor
| |
---|---|---
Tilting angle (-5°- +20°)| Height adjustment (0- 120mm)| Rotation angle
(-22.5°- +22.5°mm)
Cable connection
- The bottom interface configuration at the back of the monitor varies with products.
- Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.
Language Selection
When booting for the first time, you need to set the default language of the monitor menu. Press buttons ( ▲▼) to select the language to be set, and press the OK button to confirm.
Description of buttons
| Button | Function |
|---|---|
| 1 | Power Button: Turn monitor off/on. |
| 2 | ◄ Press Rocker to the left: Exit / quickly switch input signals of the |
port.
3| ▼Press Rocker down: Select downwards/minus. It is crosshair shortcut
button.
4| ► Press Rocker to the right: Main Menu / Ok.
5| ▲ Press Rocker up: Select upwards/plus. It is scene mode shortcut button.
Explanation of indicator light
6. Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source , no horizontal or vertical signal has been detected or power is low. Please ensure your computer is on and all video cables are fully inserted and / or connected.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Home Page: www.innocn.com
Contact Us
Europe Customer Service: support-eu@innocn.com
U.S. Customer Service: service@innocn.com
Japan Customer Service: service-japan@innocn.com
Home Page| 
Wechat
---|---
|
http://weixin.qq.com/r/PjkZAULEvh-BrQZi92ws
Home Page: www.innocn.com
Contact Us
Global Customer Service: service@innocn.com
Japan Customer Service: service-japan@innocn.com
INNOCN 400-6690-119
INNOCN JP Hotline 815050509696
Line| 
Facebook
---|---
https://lin.ee/k9yzL0J|
http://facebook.com/InnocnOfficial
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3(B)
Pour en savoir plus: www.quefairedemesdechets.fr
References
- INNOCN | Portable Monitors & Desktop Monitors, 4K Monitors, Ultrawide
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>