Qingdao KT68 Smart Screen User Guide
- June 15, 2024
- QINGDAO
Table of Contents
- START UP
- WIRELESS CONNECTION
- BATTERY SETTINGS
- RESET FUNCTION
- LIGHTING EFFECTS SWITCHING
- SLEEP STATE
- SYSTEM SWITCH
- COLUMN SLIDER SWITCH SETTINGS
- THE FUNCTION OF KNOB
- F-KEY FUNCTIONS
- SMART LED SCREEN USE DIRECTION
- FUNCTION BUTTON DESCRIPTION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KT 68 Smart Screen
MECHANICAL KEYBORD
START UP
Cable
| Wireless
---|---
****|
Wired Mode| Wireless Mode
Wired mode requires a data cable to connect the device
WIRELESS CONNECTION
For BLUETOOTH connection, you need to press FN+Z/X/C button together, wait for
3 seconds to enter the pairing mode.
For 2.4GHZ connection, you need to press the FN+V button for 3 seconds to
enable the pairing mode, and then insert the 2.4GHZ receiver to the PC.
BATTERY SETTINGS
Low Power/ Low Power Off Value:
- Low power indicator starts to flash once per second when the battery voltage < 3.5V.
- The keyboard will automatically shut down when the battery voltage < 3.2V
Charging·
Red light on when charging;
Red light off when fully charged;
The charging voltage supports up to 5V.
RESET FUNCTION
Press and hold for 3 seconds to restore factory settings
LIGHTING EFFECTS SWITCHING
Main Keyboard lighting Mode: 19 RGB lighting effects; Use the driver to set the light effect to synchronize with the music rhythm.
SLEEP STATE
The keyboard will enter sleep state without operation for 10 minutes(AII LED lights off)
SYSTEM SWITCH
| Switch to MAC OS
---|---
Switch to WIN OS
COLUMN SLIDER SWITCH SETTINGS
Default Setting: Back To Desktop (supports custom macro settings in the driver)
THE FUNCTION OF KNOB
Twist up: Volume Up
Twist down: Volume Down
Press to Mute
F-KEY FUNCTIONS
The 12 keys from FN+’1′ key to ‘+’ key correspond to the functions of F1-F12 respectively.
SMART LED SCREEN USE DIRECTION
Scan the QR Code to access the user manual of KT68 Smart Screen
FUNCTION BUTTON DESCRIPTION
CAUTIONS
Keyboard Buttons Not Responding:
-
Check whether the connection method and driver connection version are correct.
-
In the connected state, please check the power of the keyboard and whether the keyboard is connected to the computer.
If you encounter a problem that cannot be solved, please do not disassemble it by yourself, and you should contact your dealer immediately. -
Please be sure to choose a compliant charger produced by a regular manufacturer or a computer USB for charging, and the charging specification is 0C5V.
-
When charging the keyboard, be sure to choose a compliant adapter for charging, so as to avoid damage to the keyboard not caused by the quality of the product itself.
-
When the screen is turned on, it is recommended to use the wired mode to enhance the battery life; in the case of a wireless connection, it is recommended to lower the screen brightness to ensure the battery life.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.