hyco OP1200 Holster Style Hair Dryer Instruction Manual

hyco OP1200 Holster Style Hair Dryer

Product Information

Specifications

Overview

Thank you for purchasing an Opal Holster Style Hair Dryer. This hair dryer is a compact solution designed for hotels and light commercial applications. It is important to note that it is not suitable for heavy usage applications such as public swimming baths
and sports facilities. Please read and follow the instructions below to ensure a simple and safe installation and operation.

Important Safety Points

1. This appliance should only be installed and maintained by a competent person in accordance with any local electrical regulations.
2. The appliance is only intended for fixed installations.
3. This appliance is not designed for outdoor use.
4. If desired, concealed cable entry can be used. Refer to Diagram 1 and Diagram 2 for more information.

Electrical Connection

To connect the hair dryer to the electrical supply:

1. Connect the brown live wire to the terminal marked ‘L’.
2. Connect the blue neutral wire to the terminal marked ‘N’.

Operation

Ensure that the hair dryer is properly connected to the electrical supply before use.

Cleaning and Maintenance

Regular cleaning and maintenance will help keep the hair dryer in good working condition. Follow these steps:

1. Make sure the hair dryer is unplugged and cooled down before cleaning.
2. Use a soft, damp cloth to wipe the exterior surfaces of the hair dryer.
3. Do not use abrasive cleaners or solvents.

Guarantee and Service Policy

A standard parts or replacement warranty covers this product for a period of 12 months from the date of purchase. If there is a manufacturing defect within the warranty period, we will send spare parts, repair and return the unit, or provide a replacement product at our discretion. Please note that incorrect installation and failure to follow correct operating instructions are excluded from the warranty. Consequential costs such as labor charges or damage to surroundings are also excluded.

Contact Us

If you experience any problems with this product, please contact our service department at 01924 225 200 before taking any further action. Our experience has shown that many issues can be resolved without the need to return or uninstall the product.

Information for Correct Disposal

To dispose of this product correctly, please follow the European Directive 2012/19/EU. Do not dispose of this equipment as household waste. Take it to a local authority waste collection center or a dealer providing this service. Disposing of electrical and
electronic equipment separately allows for the recovery and recycling of its components, resulting in significant savings in energy and resources. Look for the crossed out dustbin symbol on the product to indicate the duty to dispose of it separately.

FAQ

• Q: Can this hair dryer be used in public swimming baths or sports facilities?
  A: No, this hair dryer is not suitable for heavy usage applications such as public swimming baths and sports facilities. It is designed for hotels and light commercial applications.

• Q: What should I do if I experience a problem with the product?
  A: If you experience any issues, please contact our service department at 01924 225 200 before taking any further action. They will assist you in resolving the problem.

Overview

Thank you for purchasing an Opal Holster Style Hair Dryer. A compact solution for hotels and light commercial applications. Not suitable for heavy usage applications such as public swimming baths and sports facilities.
Please read and follow these instructions to ensure that installation and operation are as simple and safe as possible.

Important Safety Points

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This appliance should only be installed and maintained by a competent person in accordance with any local electrical regulations.
• The appliance is only intended for fixed installations.
• This appliance is not designed for outdoor use.
• Only connect the appliance to an electrical supply that meets the specification detailed on the rating label.
• The appliance must be permanently connected to the electrical supply through an appropriately rated isolating switch with a contact separation in all poles.

Wall Mounting

• This appliance should only be installed and maintained by a competent person in accordance with any local electrical regulations.
• The appliance is only intended for fixed installations.
• This appliance is not designed for outdoor use.
• When installed, the hand-held part of this appliance, when fully extended, must be out of reach of a person taking a bath or shower.
• If concealed cable entry is desired fully read instructions before commencing wall mounting.
• Select a suitable mounting location for the appliance considering the reach of the handheld section of the appliance.
• Secure the mounting bracket to the wall using one each of the supplied wall plug and screws.
• Align the corresponding hole at the rear of the appliance just above the bracket and slide it down to engage into the bracket.
• Locate the lower securing screw hole beneath the handheld section of the appliance and mark the position on the wall.
• Remove the appliance from the wall by sliding it up and clear of the bracket.
• Drill the marked hole and insert the final wall plug.
• Return the appliance to the bracket as per the previous instruction and secure the appliance to the wall using the remaining screw.
• Insert the large white cap to conceal the screw hole before replacing the handheld section to complete the mounting

Concealed Cable Entry – If Desired

• Remove the hair dryer from the holster and locate 2 screws (see diagram 1).
• Remove both screws and pull the cover away.
• Remove the power cord from the wiring terminal (see diagram 2).
• Push to remove the circular plastic piece to create wire hole (see diagram 2) and place your prepared power cord through this hole.
• Make electrical connection to the wiring terminal as per the electrical section of these instructions.
• Refit the cover by reversing the above steps.
• Fit supplied small white cap into the original cable entry hole.

Electrical Connection

Only connect the appliance to an electrical supply that meets the specification detailed on the rating label.
The appliance must be permanently connected to the electrical supply through an appropriately rated isolating switch with a contact separation in all poles.

• Electrical connection should be made via a 13A switched fuse spur.
• Make connections as below;
  • Brown live wire to the terminal marked ‘L’
  • Blue neutral wire to the terminal marked ‘N’

Operation

• Remove the hair dryer from the holster.
• Ensure the on / off switch on the holster is in the on position.
• Use the sliding switch to select ‘high’ or ‘low’ temperature.
• Press and hold the power button to activate.
• Release power button to cease operation.
• Place appliance in holster when not in use.

Cleaning and Maintenance

• Ensure the appliance has cooled down before performing any maintenance task.
• Isolate the appliance from the electrical supply before performing any maintenance task.
• Do not use abrasive chemicals to clean this appliance.
• Use a soft damp cloth when cleaning, avoid excessive use of liquids.
• Ensure any future maintenance or modifications to the appliance comply with the guidelines in these instructions.

Use a soft brush or vacuum cleaner to gently remove dust or debris that could adversely affect the airflow through and around the appliance.

Specification

Guarantee and Service Policy

A standard parts or replacement warranty covers this product for 12 months from the date of purchase.
If there is a manufacturing defect within the warranty period we will send spare parts, repair and return the unit or, at our discretion, supply a replacement product. Incorrect installation and failure to follow correct operating instructions are excluded. Consequential costs such as labor charges or damage to surroundings are expressly excluded.

Contact Us
If you experience a problem with this product you should first contact our service department on 01924 225 200 before taking any further action. Experience has shown that issues can often be resolved without the need to return or uninstall the product.

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT BY THE EUROPEAN DIRECTIVE 2012/19/EU.
At the end of its working life this equipment must not be disposed of as household waste. It must be taken to a local authority waste collection center or to a dealer providing this service. Disposing of electrical and electronic equipment separately enables its components to be recovered and recycled to obtain significant savings in energy and resources. To underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.

Hyco Manufacturing Ltd Normandy Court Express Way Castleford, WF10 5NR
hyco.co.uk
T 01924 225 200 E sales@hyco.co.uk

References

• Water Heater, Hand Dryer & Quartz Heater Experts | HYCO Manufacturing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>