ANKER A2620 USB Plug Charger User Manual
- June 15, 2024
- Anker
Table of Contents
ANKER A2620 USB Plug Charger
Product Information
Specifications
- Input: 100-240 V ~ 0.5 A 50-60 Hz
- USB Output: 5.0 V 2.4 A
- Average active efficiency: 12.0 W (2.4 A Max Per Port)
- Efficiency at low load (10%): 83.4%
- No-load power consumption: 0.066 W
Product Usage Instructions
Step 1: Connecting the Product
Plug the PowerPort mini into a power outlet using the provided cable.
Step 2: Charging Devices
Connect your devices to the USB-A ports on the PowerPort mini using their
respective charging cables. You can charge up to two devices simultaneously.
Step 3: Powering On and Off
The PowerPort mini does not have a power button. It automatically powers on
when connected to a power outlet and powers off when disconnected.
Step 4: Troubleshooting
If you encounter any issues or component defects with the product, please
refer to the FAQs section or contact our customer service for assistance.
FAQ
-
Q: Where can I find more information and FAQs about the product?
A: For FAQs and more information, please visit our support page at https://www.anker.com/support. -
Q: How can I contact customer service?
A: You can reach our customer service through the following contact information:- Email: support@anker.com
- US Phone: +1 (800)988 7973 (Mon-Fri 6:15 – 17:00 PT)
- UK Phone: +44 (0) 1604 936200 (Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00)
- Germany Phone: +49 (0) 69 9579 7960 (Mo-Fr 6:00 – 11:00)
- Japan Phone: +86 400 0550 036 (9:00 – 18:00)
- Korea Phone: 03 4455 7823 (9:00 – 17:00)
-
Q: Are my rights under applicable consumer laws affected by the warranties?
A: No, your rights under applicable consumer laws remain unaffected by the warranties provided in this Limited Warranty.
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Attention
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during use of the appliance must not exceed 35°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2620 is in
compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH | Georg-Muche-
Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited | GNR8, 49
Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2620 is in
compliance with Electrical Equipment (Safety) Regulations 2016 &
Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010.
The full text of the GB declaration of conformity is available at the
following internet address: https://www.anker.com.
Specifications
- Input: 100-240 V ~ 0.5 A 50-60 Hz
- USB Output:
- 5.0 V 2.4 A 12.0 W
- (2.4 A Max Per Port)
- Average active efficiency: 83.4%
- Efficiency at low load (10%): 81.6%
- No-load power consumption: 0.066 W
Customer Service
-
Lifetime technical support
-
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
-
18-month limited warranty *
-
(US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)
-
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00
For FAQs and more information, please visit: anker.com/support
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>