Hamaton Truck 1.0 Sensor Clamp In Fitment Instructions
- June 15, 2024
- Hamaton
Table of Contents
Clamp-In Fitment Instructions
(Truck 1.0 Sensor)
Caution
- Sensor maintenance must be carried out by a skilled technician.
- Read through these instructions before sensor installation.
- Ensure that no contact takes place between the bead breaker blade and the valve assembly, avoiding any potential damage to the sensor or valve.
- You must service/replace the valve each time the tyre is removed to uphold the sensor warranty.
- Secure the valve to the sensor with the screw and torque of 5Nm.
- Secure the sensor to the wheel with the nut and a torque of 12-15Nm.
Sensor & Valve Exploded View
Pictured valve is for demonstration purposes only. The correct valve
to be installed will be determined by the wheel fitter based on the wheel
requirements.
- Secure the valve to the sensor with the screw and torqu to 5Nm.
- Put the valve through the valve hole, ensuring the rubber grommet makes good contact all around. Attach the nut to the valve by hand. Then, tighten the nut with a torque tool to 12-15Nm.
- Remount the tyre to the rim, ensuring the valve is opposite the tyre fitting head.
- Place the tyre in an inflation safety cage and inflate the tyre to the required pressure value.
Read User Manual Online (PDF format)
Loading......