niko Single Surface Mounting Box for All Flush Mounting Devices Instructions
- June 4, 2024
- niko
Table of Contents
niko Single Surface Mounting Box for All Flush Mounting Devices
100-77100
The single surface-mounting box in Niko Original Cream is intended to install
a flush-mounting function in certain circumstances, for example, when the
thickness of the walls is insufficient. Can be used for all functions except
the time switch.
Technical data
Single surface-mounting box for all flush-mounting devices from the Original
series, Cream.
surface-mounting box for 1 device. The box is mounted directly on the wall.
5/8” or 3/4” conduit entries can be mounted. The devices (switches, push
buttons, signal lamps, no timers) are screwed into the box, the screws are
provided. The box is made of impact-resistant, dust-resistant, halogen-free,
self-extinguishing ABS. The base material is coloured in the mass, cream
(approximately RAL 1013). Dimensions: 87 x 87 x 37mm. CE marked.
- Number of mechanisms: 1
- Protection degree: See the protection degree of the mounted function
- Marking: CE