IMOU QSG Cell Go Solar Kit Buitencamera User Guide
- June 12, 2024
- imou
Table of Contents
IMOU QSG Cell Go Solar Kit Buitencamera
Installation Instructions
Safety Instructions
- This Imou solar panel is only applicable to Imou products.
- Transport, use and store the device under the allowed humidity and temperature.
- Do not install the solar panel parallel to the ground or in places with any objects blocking sunlight.
- Avoid install the device in places with strong electromagnetic radiation.
- Do not disassemble or bend the solar panel in any way.
- Make sure that the panel is clear of dust, dirt, and any type of debris.
- Regularly wipe the solar panel to remove dust or debris.
- Keep the panel away from any liquid to avoid damage to the internal components.
- Do not heat the solar panel or put it into tire.
- Do not puncture, hit, or put heavy load on the solar panel.
- The operating temperature range of the mounting bracket is from -20 °C to +65 °C (-4 °F to+ 149 °F).
Troubleshooting
Q: Why does the solar panel stop charging the battery-powered cameras?
A: If the solar panel is not keeping your camera charged, follow the
steps below:
- Unplug the charging cable and reinsert it into the solar panel to ensure the connection between both devices is stable.
- Make sure that your solar panel is aimed toward the sun and is not obstructed by buildings, plants or other objects.
- Make sure that your camera is not in temperatures below O °C (32 °F) or above 45 °C (113 °F).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>