rizoma ZVP026 Front Mudguard Crest User Manual
- June 12, 2024
- rizoma
Table of Contents
ZVP026 Front Mudguard Crest
Product Information
Welcome to Rizoma! This user manual provides essential instructions for the installation and usage of our products. For any doubts or questions regarding installation and usage, please contact an authorized RIZOMA dealer (visit www.rizoma.com).
To ensure correct installation, all fastenings should be done after positioning the accessories correctly. Avoid forcing any movable parts once they are locked to maintain product integrity and proper functioning
Please note that Rizoma products may not be compatible with your motorcycle or other previously installed aftermarket accessories. For your safety, we recommend contacting your trusted authorized dealer.
O.E.M. refers to original equipment manufacturer components.
Descriptions preceded by the warning symbol contain critical information, instructions, or procedures that, if not followed, may lead to death or serious injury
Regular inspection and maintenance are required for your RIZOMA products. We advise inspecting them more frequently with increasedriding. If you notice any leaks, bends, deformations, cracks, chips, or wear, no matter how slight, have a RIZOMA dealer inspect the products before riding again. Never attempt to repair or modify Rizoma products or their components; always replace them with Rizoma original components.
Product Usage Instructions
- Carefully read, understand, and follow these instructions as they are an essential part of the product.
- If you have any doubts regarding installation or usage of your RIZOMA product, consult your authorized RIZOMA dealer (www.rizoma.com).
- For correct installation, tighten all fastenings after positioning the accessories correctly. Avoid restricting the movement of parts to ensure proper functioning.
- After installing any Rizoma product, check that all related components of the motorbike (e.g., brakes, throttle, clutch, lights, and steering) are functioning properly. Repeat these checks periodically, especially after long trips or prolonged periods ofnot using the bike.
- Regularly inspect and maintain your RIZOMA products. The more you ride, the more often you should inspect them. If any leaks, bends, deformations, cracks, chips, or wear are observed, no matter how slight, have a RIZOMA dealer inspect the products before riding again.
- Rizoma products may not be compatible with your motorcycle or previously installed aftermarket equipment. Contact your RIZOMA dealer for safety.
- Do not use detergent, aggressive products, or abrasive sponges to clean your product as they can damage or scratch it. Use only neutral detergent with cold water.
Product Details
Cresta parafango Mudguard crest
Part Number: ZVP026
Check the completeness of the kit on the part list. The difficulty level and time of assemblage shown do not include the removal of OEM components. Warning: Ensure your motorbike is standing firmly before starting work to avoid damage or injury.
- Difficulty Level: Simple
- Time of Assemblage: 5-10 minutes
- Installation: Install Crest (Part Number: ZVP026)
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performedby skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only. Tighten
all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer O.E.M.: original equipment manufacturer.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others. WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Warning : don’t change the grub screw tightening. 
Attention: clean and degrease the contact surface.
Attention: remove the original crest, apply with bi-adesivo the Rizoma
crest and finally tighten the nut complete spacer. 
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions. Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor. Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.