Hamaton HTS-2400 Clamp In Fitment User Guide
- June 13, 2024
- Hamaton
Table of Contents
Clamp-In Fitment Instructions
Caution
- Any maintenance or repair work must be carried out by trained experts
- Read the installation and safety instructions carefully before installing the sensor.
- When the tyre bead is broken, ensure the valve is on the opposite side of the wheel from the bead breaker blade.
- You must service/replace the valve each time the tyre is removed to uphold the sensors warranty.
- It is very important to tighten the nut to the correct torque of 5 Nm.
Exploded View
-
Break the tyre bead, ensuring the valve is on the opposite side of the wheel from the bead breaker blade. When the tyre is dismounted the valve must be located at 1 o’clock to the tyre fitting head.
-
Place the valve through the valve hole, ensuring the rubber grommet makes good contact with the valve hole all around
-
Screw the nut onto the sensor valve by hand.
-
Use a 12 mm socket and torque tool to tighten the nut S5.0Nm.
-
When remounting the tyre on to the rim ensure that the valve starts on the opposite side of the rim from the tyre fitting head
Read User Manual Online (PDF format)
Loading......