Maverick TV25 Storm 4 Profile User Manual

June 15, 2024
Maverick

TV25 Storm 4 Profile

Product Information

Specifications

  • Model ID: MAVERICKSTORM4PROFILE

  • Trademarks: Chauvet, Chauvet Professional, Maverick, Maverick
    Storm

  • Copyright: Chauvet & Sons, LLC

  • Document Revision: 4th edition

Introduction

The Maverick Storm 4 Profile is a professional lighting fixture
designed for various applications. This user manual provides
detailed information on safety precautions, installation,
programming, operation, and maintenance of the Maverick Storm 4
Profile.

Description

The Maverick Storm 4 Profile is a high-quality lighting fixture
that offers advanced features and capabilities. It is designed to
provide precise control over lighting effects and create stunning
visual displays.

Features

  • Advanced lighting effects
  • Precision control
  • User-friendly interface
  • RDM compatibility
  • USB software update capability
  • Mounting and rigging options

Product Overview

The Maverick Storm 4 Profile is a compact and versatile lighting
fixture. It is equipped with advanced technologies to deliver
exceptional performance and reliability.

Product Dimensions

The dimensions of the Maverick Storm 4 Profile are as
follows:

  • Width: [insert width]
  • Height: [insert height]
  • Depth: [insert depth]
  • Weight: [insert weight]

Product Usage Instructions

1. Before You Begin

Before using the Maverick Storm 4 Profile, please read through
the entire user manual and follow all safety precautions.
Familiarize yourself with the product and its features to ensure
proper installation, operation, and maintenance.

2. Setup

AC Power

The Maverick Storm 4 Profile requires an AC power source for
operation. Ensure that the power source meets the specified voltage
and frequency requirements.

AC Plug

Connect the AC plug of the Maverick Storm 4 Profile to a
suitable power outlet. Make sure the plug is securely inserted into
the socket.

Fuse Replacement

If the fuse needs to be replaced, follow these steps:

  1. Disconnect the Maverick Storm 4 Profile from the power
    source.

  2. Locate the fuse compartment on the fixture.

  3. Remove the old fuse and replace it with a new one of the same
    rating.

  4. Close the fuse compartment securely.

Remote Device Management (RDM)

The Maverick Storm 4 Profile is compatible with Remote Device
Management (RDM) protocols. This allows for remote monitoring and
control of the fixture’s settings and parameters. Consult the RDM
user manual for instructions on how to utilize this feature.

USB Software Update

To update the software of the Maverick Storm 4 Profile, follow
these steps:

  1. Download the latest software update from the Chauvet
    website.

  2. Connect a USB flash drive to your computer.

  3. Copy the software update file to the USB flash drive.

  4. Disconnect the Maverick Storm 4 Profile from the power
    source.

  5. Insert the USB flash drive into the USB port on the
    fixture.

  6. Reconnect the Maverick Storm 4 Profile to the power
    source.

  7. Follow the on-screen prompts to update the software.

Mounting

The Maverick Storm 4 Profile can be mounted using various
methods. Follow the procedure below for proper mounting:

Orientation

Determine the desired orientation of the fixture (e.g., hanging,
floor-standing, wall-mounted).

Rigging

If rigging the fixture, ensure that all rigging hardware is
properly installed and secured according to safety guidelines and
regulations.

Procedure
  1. Select the appropriate mounting method based on the desired
    orientation.

  2. Follow the manufacturer’s instructions for the chosen mounting
    method.

  3. Ensure that the Maverick Storm 4 Profile is securely fastened
    in place.

FAQ

Q: Can I use the Maverick Storm 4 Profile without reading the

user manual?

A: It is highly recommended to read the user manual before using
the Maverick Storm 4 Profile. This will help you understand its
features, capabilities, and proper usage.

Q: Where can I find the latest version of the user manual?

A: The latest version of the user manual can be found on the
Chauvet Professional website at www.chauvetprofessional.com.

User Manual
Model ID: MAVERICKSTORM4PROFILE

Edition Notes
The Maverick Storm 4 Profile User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Maverick Storm 4 Profile as of the release date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, Maverick, and Maverick Storm are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet. © Copyright 2023 Chauvet & Sons, LLC. All rights reserved. Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetprofessional.com.
Document Revision
This Maverick Storm 4 Profile User Manual is the 4th edition of this document. Go to www.chauvetprofessional.com for the latest version.
Maverick Storm 4 Profile User Manual Rev. 4

Table of Contents

TABLE OF CONTENTS

1. Before You Begin …………………………………………………………….. 1
What Is Included ………………………………………………………………………………. 1 Claims …………………………………………………………………………………………….. 1 Text Conventions ……………………………………………………………………………… 1 Symbols ………………………………………………………………………………………….. 1 FCC Statement of Compliance …………………………………………………………… 2 RF Exposure Warning for North America and Australia………………………….. 2 Expected LED Lifespan……………………………………………………………………… 2 Safety Notes…………………………………………………………………………………….. 3
2. Introduction …………………………………………………………………….. 4
Description ………………………………………………………………………………………. 4 Features ………………………………………………………………………………………….. 4 Product Overview……………………………………………………………………………… 4 Product Dimensions ………………………………………………………………………….. 5
3. Setup ………………………………………………………………………………. 6
AC Power ………………………………………………………………………………………… 6
AC Plug ……………………………………………………………………………………………….. 6 Fuse Replacement ………………………………………………………………………………… 6
Remote Device Management (RDM) …………………………………………………… 6 USB Software Update ……………………………………………………………………….. 7 Mounting …………………………………………………………………………………………. 8
Orientation……………………………………………………………………………………………. 8 Rigging ………………………………………………………………………………………………… 8 Procedure…………………………………………………………………………………………….. 8
Signal Connections …………………………………………………………………………… 9
Control Personalities ……………………………………………………………………………… 9 DMX Linking…………………………………………………………………………………………. 9 Art-NetTM Connection …………………………………………………………………………….. 9 sACN Connection………………………………………………………………………………….. 9 Connection Diagram ……………………………………………………………………………… 9
4. Operation ………………………………………………………………………… 10
Control Panel Description ………………………………………………………………….. 10
Battery-Powered Display………………………………………………………………………… 10
Home Screen …………………………………………………………………………………… 10 Control Panel Lock……………………………………………………………………………. 10
Passcode …………………………………………………………………………………………….. 10
Technician Mode………………………………………………………………………………. 10 Menu Map ……………………………………………………………………………………….. 11 Configuration (DMX, Art-NetTM, sACN) ………………………………………………… 16
Control Mode………………………………………………………………………………………… 16 Control Personalities ……………………………………………………………………………… 16 Starting Address……………………………………………………………………………………. 16
Network Setup………………………………………………………………………………….. 16
IP Mode…………………………………………………………………………………………………………… 16 Universe………………………………………………………………………………………………………….. 16 Manual IP Address……………………………………………………………………………………………. 16 Subnet Mask ……………………………………………………………………………………………………. 16
Control Channel Assignments and Values……………………………………………. 17 Configuration (Settings) …………………………………………………………………….. 21
Pan Reverse ………………………………………………………………………………………… 21

Maverick Storm 4 Profile User Manual Rev. 4

i

Table of Contents
Tilt Reverse ………………………………………………………………………………………….. 21 Screen Reverse ……………………………………………………………………………………. 21 Pan Angle…………………………………………………………………………………………….. 21 Tilt Angle ……………………………………………………………………………………………… 21 Black out on Movement………………………………………………………………………….. 21 Swap Pan and Tilt …………………………………………………………………………………. 21 WDMX Reset ……………………………………………………………………………………….. 21 Display Backlight Timer………………………………………………………………………….. 21 Loss of Data …………………………………………………………………………………………. 22 Fan Mode …………………………………………………………………………………………….. 22 Dimmer Curve ………………………………………………………………………………………. 22 Pulse Width Modulation …………………………………………………………………………. 22 LED Power …………………………………………………………………………………………… 22 Minimum Zoom Focus……………………………………………………………………………. 22 Preset Selection ……………………………………………………………………………………. 22 Preset Synchronization ………………………………………………………………………….. 23 USB Update …………………………………………………………………………………………. 23 Reset Function ……………………………………………………………………………………… 23 Factory Reset……………………………………………………………………………………….. 23
Test Mode ……………………………………………………………………………………….. 23
Auto Test……………………………………………………………………………………………… 23 Manual Test …………………………………………………………………………………………. 23
System Information …………………………………………………………………………… 24 Offset Mode (Zero Adjust)………………………………………………………………….. 24 Web Server ……………………………………………………………………………………… 24 Gobo Wheels …………………………………………………………………………………… 25
Gobo Dimensions………………………………………………………………………………….. 25 Gobo Replacement ……………………………………………………………………………….. 26
5. Maintenance…………………………………………………………………….. 27
Product Maintenance ………………………………………………………………………… 27
6. Technical Specifications ………………………………………………….. 28
Contact Us ………………………………………………………………………….. 29
Warranty & Returns…………………………………………………………………………… 29

ii

Maverick Storm 4 Profile User Manual Rev. 4

Before You Begin

1. Before You Begin

What Is Included

· Maverick Storm 4 Profile · Seetronic Powerkon IP65 power cable

· 2 Omega brackets with mounting hardware · Quick Reference Guide

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate the claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Convention 1­512 50/60
Settings
Symbols

Meaning A range of values A set of values of which only one can be chosen A menu option not to be modified A key to be pressed on the product’s control panel

Symbol

Meaning
Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
Important installation or configuration information. The product may not function correctly if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.

Maverick Storm 4 Profile User Manual Rev. 4

1

Before You Begin
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. · Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity.

2

Maverick Storm 4 Profile User Manual Rev. 4

Before You Begin
Safety Notes
Read all the following safety notes before working with this product. These notes contain important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
· The luminaire is intended for professional use only. · The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than
37.73 ft (11.5 m) is not expected. · If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord
or cord exclusively available from the manufacturer or its service agent. · The light source contained in this luminaire shall only be replaced by the manufacturer or its service
agent or a similar qualified person. · CAUTION:
· This product’s housing may be hot when operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
· When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow the product to fully acclimate to the surrounding environment before connecting it to power.
· Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding notification of strobe use.
· ALWAYS: · Disconnect from power before cleaning the product or replacing the fuse. · When using an IP65-rated product in an outdoor environment, use IP65- (or higher) rated power and data cable. · Replace and secure IP-rated protective covers to all power, data, USB, or other ports when not in use. · Replace the fuse with the same type and rating. · Use a safety cable when mounting this product overhead. · Connect this product to a grounded and protected circuit.
· DO NOT: · Open this product. It contains no user-serviceable parts. · Look at the light source when the product is on. · Leave any flammable material within 20 cm of this product while operating or connected to power. · Connect this product to a dimmer or rheostat. · Operate this product if the housing, lenses, or cables appear damaged. · Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine. · Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not limited to: · Exposure to a marine/saline environment (within 3 miles of a saltwater body of water). · Locations where normal temperatures exceed the temperature ranges in this manual. · Locations that are prone to flooding or being buried in snow. · Other areas where the product will be subject to extreme radiation or caustic substances.
· ONLY use the hanging/mounting bracket to carry this product. · The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher
temperatures. · The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures. · The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures. · To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it. · In the event of a serious operating problem, stop using immediately.
If a Chauvet product requires service, contact Chauvet Technical Support.

Maverick Storm 4 Profile User Manual Rev. 4

3

Introduction
2. Introduction
Description
Maverick Storm 4 Profile brings indomitable long throw performance to even the largest venues. Its ambitious design launches over 60,000 lumens across incredible distances with commanding brightness. Built to outshine, this Maverick brings more to a show than its long throw. Master the art of domination with a sophisticated variable CMY+CTO system that delivers fantastic color rendering. Double down on crisp gobos to create complex looks with two rotating gobo wheels, two prisms, two frost filters, and an animation wheel to add even more texture. Sharp shutter framing, smooth iris and 8.5:1 zoom complete a Maverick that delivers key light and high-energy kinetic effects, in an advanced IP65 alloy body that carries SunShield tech inside to protect optical components from any solar ingress through its audacious 188mm front lens.
Features
· Fully featured, compact, and lightweight IP65 1250 W LED yoke profile fixture, including CMY + CTO color mixing, a four-blade framing shutter system with rotation, a color wheel, 8:1 zoom, two prisms (fivefacet round and linear), two rotating gobo wheels, and integrated sun shield
· 16-bit dimming of master dimmer for smooth control of fades · Variable CMY + CTO color mixing system to create a wide pallet of colors · CRI and CTB filters on color wheel for added flexibility · Two rotating, indexing, and interchangeable slot and lock gobo wheels · An animation wheel for kinetic textured effects · DMX, WDMX, sACN, and Art-Net for full flexibility of control options · RDM control over DMX for fixture reporting · 5.6° to 56.8° zoom range for variable beam sizes · Iris, five-facet round and linear prisms, and two frosts (light and medium) for beam control · TRUE1-compatible power input · Integrated sun shield for protecting the optical path from sunlight when the fixture is off · Three setup menu presets and preset sync for cross- loading to multiple like fixtures for easy shop setup · USB slot for software uploads · Battery backup display with auto-rotate depending on fixture orientation
Product Overview

LCD display

Menu buttons

Carry handles

Antenna
Condensation valve

Ethernet DMX USB C Power Fuse

ports in/out port

in holder

4

Maverick Storm 4 Profile User Manual Rev. 4

Introduction Product Dimensions

21.10 in 536 mm

5.04 in 128 mm
10.82 in 275 mm

24.80 in 630 mm
17.50 in 445 mm

12.04 in 306 mm

18.47 in 469 mm

32.91 in 836 mm

25.54 in 649 mm

11.94 in 303 mm
Maverick Storm 4 Profile User Manual Rev. 4

6.18 in 157 mm
5

Setup

3. Setup

AC Power
The Maverick Storm 4 Profile has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

· Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
· To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug
The Maverick Storm 4 Profile comes with a power input cable terminated with a Seetronic Powerkon A connector on one end and bare wire on the other end (U.S. market). Use the table below to wire a plug.

Connection

Wire (U.S.)

Wire (Europe)

Screw Color

AC Live

Black

Brown

Yellow or Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green/Yellow

Green

Fuse Replacement

1. Disconnect this product from the power outlet. 2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing. 3. Remove the blown fuse and replace with another fuse of the same type and rating (25 A, 750 V). 4. Screw the fuse holder cap back in place and reconnect power.

Remote Device Management (RDM)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The Maverick Storm 4 Profile supports RDM protocol that allows feedback to make changes to menu map options.

6

Maverick Storm 4 Profile User Manual Rev. 4

Setup
USB Software Update
The Maverick Storm 4 Profile allows for software update through USB using the built-in USB port. To update the software using a USB type C flash drive, do the following:
1. Power on the fixture and plug the flash drive into the USB port. 2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed.
Press . If a different message appears on the display, search for the update software in the main menu (Upgrade Firmware) and select from Only This Fixture, Multiple Fixture, or Other Fixture Type. A list of the software update files will be displayed. 3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed. Press .
If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat steps 1-3 using the correct file.
4. If the selected file is correct, the upgrade will start. DO NOT turn off the power or disconnect the USB during the process. USB update can take several minutes to complete.
5. When the update is completed, the fixture will automatically reboot. 6. Go to the Fixture Information on the product’s menu map and confirm the firmware revision 7. When the boot-up process is finished, restart the product.
· Place the .chl format file in the root folder of the USB drive. · The product’s USB port supports up to 32GB capacity and only works with FAT32 file
format.

Maverick Storm 4 Profile User Manual Rev. 4

7

Setup

Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product. · Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes. · Mount the product on a structure or surface that can support the product’s weight. See the Technical Specifications for weight information. · Always use a safety cable when mounting the product overhead. Mount the product securely to a rigging point, whether an elevated platform or a truss. · Use a mounting clamp of appropriate weight capacity when rigging the product onto truss.
Procedure
The Maverick Storm 4 Profile comes with 2 omega brackets. The user can directly attach mounting clamps (sold separately) to these omega brackets. Use at least two mounting points per product. Make sure the clamps are capable of supporting the weight of this product. For the Chauvet Professional line of mounting clamps, go to http://www.trusst.com/products. Mounting Diagram

Mounting clamp (2x)

Safety cable

Omega bracket (2x)

Overhead mounting

Surface mounting

Use the 140-D Omega brackets that is supplied with the fixture when doing an overhead mount.

8

Maverick Storm 4 Profile User Manual Rev. 4

Setup
Signal Connections
The Maverick Storm 4 Profile can receive a DMX, Art-NetTM, or sACN, signal. The product has two Amphenol XLRnet through ports, and 5-pin DMX in and out ports. It is possible to control compatible products individually with a single controller.
Control Personalities
The Maverick Storm 4 Profile uses a 5-pin DMX data connection, WDMX, Art- NetTM, or sACN for its two control personalities: Dmx Mode 38 CH and Dmx Mode 55 CH.
· Refer to the Operation chapter to learn how to configure the Maverick Storm 4 Profile to work in these personalities.
· The Control Channel Assignments and Values section provides detailed information regarding the control personalities.
For more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX primer from the Chauvet website: www.chauvetprofessional.com.
DMX Linking
Use a 5-pin DMX connection or a WMDX connection to link a DMX controller to the Maverick Storm 4 Profile. For more information about DMX, read the DMX primer at: https:// www.chauvetprofessional.com/wp- content/uploads/2016/06/DMX_Primer.pdf.
Art-NetTM Connection
Art-NetTM is an Ethernet protocol that uses TCP/IP that transfers a large amount of DMX512 data using an Amphenol XLRnet RJ45 connection over a large network. An Art-NetTM protocol document is available from www.chauvetprofessional.com. Art-NetTM designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Streaming ACN (Architecture for Control Networks), also known as ANSI E1.31, is an Ethernet protocol that uses the layering and formatting of ACN to transport DMX512 data over IP or any other ACNcompatible network.
Connection Diagram
Switch or Router

Computer/ Controller
(running Art-NetTM or sACN protocol)

Maverick Storm 4 Profile

Maverick Storm 4 Profile User Manual Rev. 4

To other Art-NetTM or sACN devices
9

Operation
4. Operation
Control Panel Description
Button Name Function Navigates upwards through the menu list or increases the value when in a function

Exits from the current menu or function Navigates downwards through the menu list or decreases the value when in a function Navigates leftwards through the menu list Enables the currently displayed menu or sets the selected value into the function Navigates rightwards through the menu list Battery-Powered Display The Maverick Storm 4 Profile has a battery-powered display that enables access to the menu when the product is powered off. Press and hold until the display activates (approximately 15 seconds). Home Screen The Maverick Storm 4 Profile has a home screen that shows the current control protocols, personalities, starting addresses, IP addresses, and universes. To see the home screen, press repeatedly until it shows on the display. From the home screen, touch any of the displayed control settings to immediately jump to that part of the menu, such as the personality, starting address, or universe, or press to reach the main menu. Control Panel Lock The setting locks or unlocks the control panel. 1. Go to the Settings main level. 2. Select the Lock Screen option. 3. Select NO (control panel stays unlocked) or YES (locks control panel). When the control panel lock is activated, the product will prompt for the passcode in order to access the menu. Enter the passcode as described below. Passcode After being prompted to enter the passcode, enter the numbers 0920. Technician Mode The technician mode disables the pan and tilt motors, allowing the output of the product to be aimed by hand. To enable the technician mode of the Maverick Storm 4 Profile, hold and while the product is powering on. When the product is turned off and back on, the pan and tilt will return to normal function.

10

Maverick Storm 4 Profile User Manual Rev. 4

Operation

Menu Map

Refer to the Maverick Storm 4 Profile product page on www.chauvetprofessional.com for the latest menu map.

Main Level Address Network Setup
Personality
Settings

Programming Levels

Description

001­512

Sets the starting address

Manual

Manually set IP address

IP Mode

DHCP

Network sets IP address

Static

Product sets IP address

Universe

000­255 (Art-NetTM) 001­256 (sACN)

Sets the universe

Ip

. . . (000­255) Sets the IP address in Manual mode

SubMask . . . (000­255) Sets the Subnet Mask in Manual mode

Dmx Mode 38 CH Dmx Mode 55 CH

NO YES

Selects the 38-channel mode Selects the 55-channel mode

DMX

Control Mode

ArtNet sACN

Sets the control protocol

WDMX

Pan Reverse

NO YES

Normal pan Reversed pan

Tilt Reverse

NO YES

Normal tilt Reversed tilt

Screen Reverse

NO YES AUTO

Normal display orientation Inverted display orientation Automatic display orientation

540

540° pan range

Pan Angle

360

360° pan range

180

180° pan range

270

270° tilt range

Tilt Angle

180

180° tilt range

090

90° tilt range

BL. O. P/T Move

NO YES

Enable/disable blackout while panning/ tilting

BL. O. ColorMove

NO YES

Enable/disable blackout while color wheel is moving

BL. O. GoboMove

NO YES

Enable/disable blackout while gobo wheels are moving

Lock Screen

NO YES

Lock the buttons Passcode: 0920

Swap XY

NO YES

Do not swap pan and tilt Pan controls tilt, tilt controls pan

WDMX Reset

NO YES

Do not reset WDMX Reset WDMX

30S

Display turns off after 30 seconds

Backlight Timer

1M

Display turns off after 1 minute

5M

Display turns off after 5 minutes

ON

Display stays on

Loss of Data

Hold Close

Holds last signal received Blacks out fixture

Maverick Storm 4 Profile User Manual Rev. 4

11

Main Level

Fans

Programming Levels Auto Full ECO
TV25

Settings (cont.)

TV35

Dimmer Curve
PWM Option
LED POWER Min Zoom Focus Preset Select
Preset Sync USB Update
Reset Function
Factory Settings

Linear Square I Squa SCurve Linear2 600 Hz 1200 Hz 2000 Hz 4000 Hz 6000 Hz 15000 Hz
64­255
NO YES PRESET A PRESET B PRESET C NO

YES

NO
YES Pan/Tilt
Iris/Prism
Color/CMY/ Blade
Gobo/Gobo Rotate Frost/
Animation
All NO
YES

NO YES

Operation
Description Fan speed according to product temperature Fan speed set on high Quiet mode Maintains LED output up to an ambient temperature of 77 °F (25 °C) (TV25) or 95 °F (35 °C) (TV35). When using these fan modes, please set the PWM Options to 6000Hz or 15000Hz to prevent any harmonization noise.
Set the dimmer curve
Sets the Pulse Width Modulation frequency
Sets LED power Enables/disables Min Zoom Focus
Recorded preset menu options
Transfers recorded preset menu options to other Maverick Storm 4 Profile fixtures in the DMX daisy chain Update firmware via USB C
Reset individual functions or all functions from start-up
Reset to factory default settings

12

Maverick Storm 4 Profile User Manual Rev. 4

Operation

Main Level Test

Manual Test

Programming Levels

Auto Test

Pan

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Dimmer Fine

Shutter

Virtual Shaking

Cyan

Magenta

Yellow

CTO

Color

Gobo

Gobo Rotate

Gobo Index

Gobo2

Gobo2 Rotate

Gobo2 Index

Animation

Animation Rotate

Blade1-1

0­255

Blade1-1 Fine

Blade1-2

Blade1-2 Fine

Blade2-1

Blade2-1 Fine

Blade2-2

Blade2-2 Fine

Blade3-1

Blade3-1 Fine

Blade3-2

Blade3-2 Fine

Blade4-1

Blade4-1 Fine

Blade4-2

Blade4-2 Fine

Blade Rotate

Blade. Rota Fine

Focus

Focus Fine

Focus Auto

Zoom

Zoom Fine

Description Auto test all functions
Manually control and test all settings through the control panel

Maverick Storm 4 Profile User Manual Rev. 4

13

Operation

Main Level Test (cont.)
Information

Manual Test (cont.)

Programming Levels

Prism

Prism Rotate

Prism2

Prism2 Rotate

Iris

Frost Frost2

0­255

CMY Macro

CMY Macro Speed

Special Function

Ver

V_

Running Mode


DMX Address


Fixture Temperature Information Fixture Hours


LED Hours


Ip


SubMask

Fan Information

Base Fan1­4
FAN _ (x17)

Speed Speed

Error Information


Frequency

Pan

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Dimmer Fine

Shutter

Virtual Shaking

Cyan

Channel Information

Magenta Yellow

000­255

CTO

Color

Gobo

Gobo Rotate

Gobo Index

Gobo2

Gobo2 Rotate

Gobo2 Index

Animation

Animation Rotate

Description
Manually control and test all settings through the control panel
Shows firmware version Shows current running mode Shows current starting address Shows current product temperature in °C Shows hours product has been on Shows hours LED has been on Shows current IP address Shows current Subnet Mask Shows speed of each fan in rpm Shows any errors, or No Error!
Shows all current values from input signals

14

Maverick Storm 4 Profile User Manual Rev. 4

Operation

Main Level
Information (cont.)

Programming Levels

Blade1- 1

Blade1- 1 Fine

Blade1- 2

Blade1- 2 Fine

Blade2- 1

Blade2- 1 Fine

Blade2- 2

Blade2- 2 Fine

Blade3- 1

Blade3- 1 Fine

Blade3- 2

Blade3- 2 Fine

Blade4- 1

Blade4- 1 Fine

Blade4- 2

Blade4- 2 Fine

Channel Information
(cont.)

Blade Rotate
Blade. Rota Fine
Focus

000­255

Focus Fine

Focus Auto

Zoom

Zoom Fine

Prism

Prism Rotate

Prism2

Prism2 Rotate

Iris

Frost

Frost2

CMY Macro

CMY Macro Speed

Special Function

Description
Shows all current values from input signals

Maverick Storm 4 Profile User Manual Rev. 4

15

Operation
Configuration (DMX, Art-NetTM, sACN)
Use control configurations to operate the product with a DMX, Art-NetTM, or sACN controller.
Control Mode
The Maverick Storm 4 Profile works with wired DMX, WDMX, Art-NetTM, and sACN control signals. To select which protocol to use:
1. Go to the Settings main level. 2. Select the Control Mode option. 3. Select the desired protocol, from DMX, ArtNet, sACN, or WDMX.
Control Personalities
To set the control personality: 1. Go to the Personality main level. 2. Select the desired personality, from Dmx Mode 38 CH or Dmx Mode 55 CH.
· See the Starting Address section for the highest selectable starting address for each personality.
· Make sure that the starting addresses on the various products do not overlap due to the new personality setting.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same starting address will respond in unison. To set the starting address:
1. Go to the Address main level. 2. Select the starting address (001­512).
· The highest recommended starting address for Dmx Mode 38 CH is 475. · The highest recommended starting address for Dmx Mode 55 CH is 458.
Network Setup
The Network Setup settings control the IP address, subnet mask, and universe of the product.
IP Mode
To choose how the IP address is set: 1. Go to the Network Setup main level. 2. Select the IP Mode option. 3. Select the desired IP mode, from Manual (to set a custom IP address), DHCP (the IP address is assigned by the connected network), or Static (the product uses a default, preset IP address).
Universe
To assign an Art-NetTM or sACN universe to the Maverick Storm 4 Profile: 1. Go to the Network Setup main level. 2. Select the Universe option. 3. Set the universe, from 000­255 (for Art-NetTM) or from 001­256 (for sACN).
Manual IP Address
To set the IP address when the IP Mode is set to Manual: 1. Go to the Network Setup main level. 2. Select the Ip option. 3. Set the 4 values of the IP address from 000­255.
Subnet Mask
To set the subnet mask: 1. Go to the Network Setup main level. 2. Select the SubMask option. 3. Set the 4 values of the subnet mask from 000­255.

16

Maverick Storm 4 Profile User Manual Rev. 4

Operation

Control Channel Assignments and Values

38CH 55CH Function

1

1 Pan

2

2 Fine pan

3

3 Tilt

4

4 Fine tilt

5

5 Pan/tilt speed

6

6 Dimmer

­

7 Fine dimmer

7

8 Strobe

8

9 Virtual shaking

9 10 Cyan 10 11 Magenta 11 12 Yellow 12 13 CTO

13 14 Color wheel

14

15

Gobo wheel 1 (see Gobo Wheels)

Value Percent/Setting
000 255 0­100% 000 255 Fine control (16-bit) 000 255 0­100% 000 255 Fine control (16-bit) 000 255 Fast to slow 000 255 0­100% 000 255 Fine control (16-bit) 000 003 Off 004 007 On 008 076 Synchronized strobe, slow to fast 077 145 Pulse strobe, slow to fast 146 215 Random strobe, slow to fast 216 255 On 000 001 No function 002 128 Shaking effect, slow to fast 129 255 Fade effect, slow to fast 000 255 0­100% 000 255 0­100% 000 255 0­100% 000 255 0­100% 000 007 Open 008 015 Color 1 016 023 Color 2 024 031 Color 3 032 039 Color 4 040 047 Color 5 048 059 Color 6 060 187 Color wheel indexing 188 219 Color scroll, fast to slow 220 223 Stop 224 255 Reverse color scroll, slow to fast 001 007 Open 008 015 Gobo 1 (Dots) 016 023 Gobo 2 (Paperclip Party) 024 031 Gobo 3 (Orbital) 032 039 Gobo 4 (Dirty Dirt) 040 047 Gobo 5 (Box Cutter) 048 063 Gobo 6 (Crazy Turns) 064 071 Gobo 6 shaking, slow to fast 072 079 Gobo 5 shaking, slow to fast 080 087 Gobo 4 shaking, slow to fast 088 095 Gobo 3 shaking, slow to fast 096 103 Gobo 2 shaking, slow to fast 104 111 Gobo 1 shaking, slow to fast 112 127 Open 128 191 Gobo scroll, slow to fast 192 255 Reverse gobo scroll, slow to fast

Maverick Storm 4 Profile User Manual Rev. 4

17

Operation

38CH 55CH Function 15 16 Gobo wheel 1 rotate ­ 17 Gobo 1 fine rotate

16

18

Gobo wheel 2 (see Gobo Wheels)

17 19 Gobo wheel 2 rotate
­ 20 Gobo 2 fine rotate 18 21 Animation wheel
19 22 Animation wheel rotate
20 23 Blade 1-1 ­ 24 Fine blade 1-1 21 25 Blade 1-2 ­ 26 Fine blade 1-2 22 27 Blade 2-1 ­ 28 Fine blade 2-1 23 29 Blade 2-2 ­ 30 Fine blade 2-2 24 31 Blade 3-1 ­ 32 Fine blade 3-1 25 33 Blade 3-2 ­ 34 Fine blade 3-2 26 35 Blade 4-1 ­ 36 Fine blade 4-1 27 37 Blade 4-2

Value Percent/Setting

000 063 Gobo index 064 145 Rotation, fast to slow 146 149 Stop 150 231 Reverse rotation, slow to fast

232 255

Alternating clockwise/counterclockwise rotation, short to long

000 255 Fine control (16-bit)

001 007 Open

008 015 Gobo 1 (Pipes & Poles)

016 023 Gobo 2 (Cookie Cutter)

024 031 Gobo 3 (This Way)

032 039 Gobo 4 (Fast Moves)

040 047 Gobo 5 (Laser Rays)

048 063 Gobo 6 (Limbo)

064 071 Gobo 6 shaking, slow to fast

072 079 Gobo 5 shaking, slow to fast

080 087 Gobo 4 shaking, slow to fast

088 095 Gobo 3 shaking, slow to fast

096 103 Gobo 2 shaking, slow to fast

104 111 Gobo 1 shaking, slow to fast

112 127 Open

128 191 Gobo scroll, slow to fast

192 255 Reverse gobo scroll, slow to fast

000 063 Gobo index

064 145 Rotation, fast to slow

146 149 Stop

150 231 Reverse rotation, slow to fast

232 255

Alternating clockwise/counterclockwise rotation, short to long

000 255 Fine control (16-bit)

000 255 0­100%

000 124 Rotation, fast to slow

125 130 Stop

131 255 Reverse rotation, slow to fast

000 255 0­100%

000 255 Fine control (16-bit)

000 255 0­100%

000 255 Fine control (16-bit)

000 255 0­100%

000 255 Fine control (16-bit)

000 255 0­100%

000 255 Fine control (16-bit)

000 255 0­100%

000 255 Fine control (16-bit)

000 255 0­100%

000 255 Fine control (16-bit)

000 255 0­100%

000 255 Fine control (16-bit)

000 255 0­100%

18

Maverick Storm 4 Profile User Manual Rev. 4

Operation
38CH 55CH Function ­ 38 Fine blade 4-2 28 39 Blade rotation ­ 40 Fine blade rotation 29 41 Focus ­ 42 Fine focus
­ 43 Auto focus
30 44 Zoom ­ 45 Fine zoom 31 46 Prism 1
32 47 Prism 1 rotate
33 48 Prism 2
34 49 Prism 2 rotate
35 50 Iris 36 51 Frost 1 37 52 Frost 2 ­ 53 CMY macro ­ 54 CMY macro speed

Value Percent/Setting
000 255 Fine control (16-bit) 000 255 0­100% 000 255 Fine control (16-bit) 000 255 0­100% 000 255 Fine control (16-bit) 000 010 No function 011 030 0-5 meters 031 050 6 meters 051 070 7 meters 071 090 8 meters 091 110 9 meters 111 130 10 meters 131 150 12.5 meters 151 170 15 meters 171 190 17.5 meters 191 210 20-60 meters 211 255 Auto detect distance 000 255 0­100% 000 255 Fine control (16-bit) 000 004 No function 005 255 Prism insert 000 127 Prism index 128 189 Clockwise rotation, fast to slow 190 193 Stop 194 255 Counterclockwise rotation, slow to fast 000 004 No function 005 255 Prism insert 000 127 Prism index 128 189 Clockwise rotation, fast to slow 190 193 Stop 194 255 Counterclockwise rotation, slow to fast 000 063 Big to small 064 127 Auto change, slow to fast 128 191 Slow open, fast close, slow to fast 192 255 Fast open, slow close, slow to fast 000 255 0­100% 000 255 0­100% 000 009 No function 010 255 CMY macro 000 255 Fast to slow

Maverick Storm 4 Profile User Manual Rev. 4

19

38CH 55CH Function

38

55

Control (3 second hold)

Operation
Value Percent/Setting 000 007 No function 008 015 Blackout during pan/tilt 016 023 Blackout while color wheel is moving 024 031 Blackout while gobo wheels are moving 032 039 Blackout during pan/tilt/color wheel 040 047 Blackout during pan/tilt/gobo wheels 048 055 Blackout during pan/tilt/color wheel/gobo wheels
056 No function
057 600 Hz PWM
058 1200 Hz PWM
059 2000 Hz PWM
060 4000 Hz PWM
061 6000 Hz PWM
062 15000 Hz PWM
063 No function
064 Linear dimmer curve
065 Square dimmer curve
066 Inverse square dimmer curve
067 S-curve dimmer curve
068 Linear 2 dimmer curve 069 095 No function 096 103 Pan reset 104 111 Tilt reset 112 119 Color wheel reset 120 127 Gobo wheels reset 128 135 No function 136 143 Prism reset 144 151 Blades reset 152 159 All reset 160 167 Iris reset 168 175 Frost/animation wheel reset 176 183 Zoom reset 184 191 CMY/CTO reset 192 199 Fan mode ECO 200 207 Fan mode Full 208 215 Fan mode Auto 216 220 Fan mode TV25 221 225 Fan mode TV35 226 230 No function 231 235 Pan/tilt swap on 236 240 Pan/tilt swap off 241 245 Min Zoom Focus off 246 250 Min Zoom Focus on 251 255 No function

20

Maverick Storm 4 Profile User Manual Rev. 4

Operation
Configuration (Settings)
Pan Reverse
To set the orientation of the pan: 1. Go to the Settings main level. 2. Select the Pan Reverse option. 3. Select from NO (normal pan motion), or YES (reversed pan motion).
Tilt Reverse
To set the orientation of the tilt: 1. Go to the Settings main level. 2. Select the Tilt Reverse option. 3. Select from NO (normal tilt motion), or YES (reversed tilt motion).
Screen Reverse
To set the orientation of the display: 1. Go to the Settings main level. 2. Select the Screen Reverse option. 3. Select from NO (right-side up), YES (upside-down), or AUTO (automatic orientation).
Pan Angle
To set the maximum angle of the pan: 1. Go to the Settings main level. 2. Select the Pan Angle option. 3. Select from 540 (540°), 360 (360°), or 180 (180°).
Tilt Angle
To set the maximum angle of the tilt: 1. Go to the Settings main level. 2. Select the Tilt Angle option. 3. Select from 270 (260°), 180 (180°), or 090 (90°).
Black out on Movement
To set the product to black out while the pan/tilt, color wheel, or gobo wheels are moving: 1. Go to the Settings main level. 2. Select from the BL. O. P/T Move (black out on pan/tilt movement), BL. O. ColorMove (black out on color wheel movement), or BL. O. GoboMove (black out on gobo wheel movement) options. 3. Select from NO or YES.
Swap Pan and Tilt
To swap the controls for the pan and tilt: 1. Go to the Settings main level. 2. Select the Swap XY option. 3. Select from NO (pan controls pan, tilt controls tilt) or YES (pan controls tilt, tilt controls pan).
WDMX Reset
To reset the WDMX connection: 1. Go to the Settings main level. 2. Select the WDMX Reset option. 3. Select from NO or YES.
Display Backlight Timer
To set how long before an inactive display will turn off: 1. Go to the Settings main level. 2. Select the Backlight Timer option. 3. Select the length of the backlight timer, from 30S (30 seconds), 1M (1 minute), 5M (5 minutes), or ON (always on).

Maverick Storm 4 Profile User Manual Rev. 4

21

Operation
Loss of Data
To set how the product reacts to a loss of in control signal data: 1. Go to the Settings main level. 2. Select the Loss of Data option. 3. Select Hold (holds the last values received before signal loss) or Close (blacks out the product).
Fan Mode
To set the fan speed mode: 1. Go to the Settings main level. 2. Select the Fans option. 3. Select the fan mode, from Auto (fan speed adjusts to product temperature), Full (fan speed at maximum), ECO (quiet mode), TV25 (maintains LED output up to an ambient temperature of 77 °F [25 °C]), or TV35 (maintains LED output up to an ambient temperature of 95 °F [35 °C]).
When using the TV25 or TV35 fan mode, please set the PWM Options (Pulse Width Modulation) to 6000Hz or 15000Hz to prevent any harmonization noise.
Dimmer Curve
To set the dimmer curve: 1. Go to the Settings main level. 2. Select the Dimmer Curve option. 3. Select the dimmer curve, from Linear, Square, I Squa, SCurve, or Linear2.
Pulse Width Modulation
To adjust the frequency of the pulse width modulation: 1. Go to the Settings main level. 2. Select the PWM Option option. 3. Select the frequency, from 600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 15000Hz.
LED Power
To set the power of each LED color: 1. Go to the Settings main level. 2. Select the LED POWER option. 3. Set the LED power from 64­255.
Minimum Zoom Focus
To enable or disable the Min Zoom Focus function: 1. Go to the Settings main level. 2. Select the Min Zoom Focus option. 3. Select NO (manual independent zoom control) or YES (focus adjusts depending on zoom setting).
Preset Selection
To select a preset configuration of menu options: 1. Go to the Settings main level. 2. Select the Preset Select option. 3. Select from PRESET A (default), PRESET B, or PRESET C.
· Changes to settings automatically save to the currently selected Preset. · If no Preset has been selected, changes to settings save to PRESET A. · After selecting a Preset, the product will restart.

22

Maverick Storm 4 Profile User Manual Rev. 4

Operation
Preset Synchronization
To transfer saved Presets from one Maverick Storm 4 Profile to another: 1. Connect the Maverick Storm 4 Profile products to receive the Presets by a DMX daisy chain. 2. Make the Maverick Storm 4 Profile with the Presets to transfer the first in the DMX daisy chain. 3. Power on all of the products. 4. Set all of the products to a Control Mode other than WDMX. (DMX, ArtNet, or sACN) 5. On the Maverick Storm 4 Profile with the Presets, go to the Settings main level. 6. Select the Preset Sync option. 7. Select NO (to cancel) or YES (to transfer the Presets to the connected products).
· All menu configurations are transferred except for the IP address. · ONLY connect Maverick Storm 4 Profile products for this function!
USB Update
To enable or disable software update using USB: 1. Go to the Settings main level. 2. Select the USB Update option. 3. Select NO (disables software update through USB) or YES (enables software update through USB).
See the USB Software Update section for the detailed instructions on how to update the Maverick Storm 4 Profile software using a USB C connection.
Reset Function
To reset specific functions or the entire product: 1. Go to the Settings main level. 2. Select the Reset Function option. 3. Select the functions to reset, from Pan/Tilt, Iris/Prism, Color/CMY/Blade, Gobo/Gobo Rotate, Frost/Animation, or All. 4. Select NO (to cancel) or YES (to reset the selected functions).
Factory Reset
To reset the product to factory settings: 1. Go to the Settings main level. 2. Select the Factory Settings option. 3. Select NO (to cancel) or YES (to reset the product configuration).
Test Mode
Auto Test
To have the Maverick Storm 4 Profile automatically test all functions one after the other: 1. Go to the Test main level. 2. Select the Auto Test option.
Manual Test
To manually test an individual function of the Maverick Storm 4 Profile: 1. Go to the Test main level. 2. Select the Manual Test option. 3. Select a function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer, Dimmer Fine, Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO, Color, Gobo, Gobo Rotate, Gobo Index, Gobo2, Gobo2 Rotate, Gobo2 Index, Animation, Animation Rotate, Blade1-1, Blade11 Fine, Blade1-2, Blade1-2 Fine, Blade2-1, Blade2-1 Fine, Blade2-2, Blade2-2 Fine, Blade3-1, Blade3-1 Fine, Blade3-2, Blade3-2 Fine, Blade4-1, Blade4-1 Fine, Blade4-2, Blade4-2 Fine, Blade Rotate, Blade. Rota Fine, Focus, Focus Fine, Focus Auto, Zoom, Zoom Fine, Prism, Prism Rotate, Prism2, Prism2 Rotate, Iris, Frost, Frost2, CMY Macro, CMY Macro Speed, or Special Function. 4. Increase or decrease the value of the selected function from 0­255 to test it.

Maverick Storm 4 Profile User Manual Rev. 4

23

Operation
System Information
The information section of the menu displays statistics and the current status of the product’s various functions. To view this information:
1. Go to the Information main level. 2. Select from the Fixture Information, Fan Information, Error Information, or Channel
Information options. 3. Use and to view all information.
Offset Mode (Zero Adjust)
The Offset mode provides fine adjustments for the home position of every moving part in the optical path as well as the pan and tilt movements. To adjust these options and prevent borders showing or reduction of the light output:
1. From the main level screen, press and hold

until the passcode screen appears. 2. Enter the passcode: 0920 and press . 3. Select the “zero” position to adjust, from PAN, TILT, COLOR, GOBO, GOBO ROTATE, GOBO2,
FOCUS-GOBO, FOCUS-GOBO2, ZOOM, PRISM, PRISM ROT, IRIS, FROST, FROST2, CYAN, MAGENTA, YELLOW, CTO, DIMMER, MAC4, MAC5, or MAC6. 4. Adjust the “zero” position for the selected function from 000­255.
Web Server
The Maverick Storm 4 Profile Web Server can be accessed by any computer on the same network as the product. It allows network access to system information, settings such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password.
1. Connect the product to power, and set the Control Mode to ArtNet and the IP Mode to Static. 2. Connect the product to a Windows computer with a network cable. 3. On the computer, set the first value of the IP address of the new network to match the first value of
the IP address of the product. The IP address of the product is displayed on the Home Screen. 4. Enter the IP address of the product into the URL bar of a web browser on the computer. 5. Enter both the User Name and Password as admin to log in. Information The Information page on the Web Server displays the current settings and the system information of the Maverick Storm 4 Profile. Setup The Setup page on the Web Server provides options for control, similar to the Setup menu on the product. Click Save Settings to send the new configuration to the product. Manual Test The Manual Test page on the Web Server allows all output functions of the product to be controlled through the browser. To set all functions back to default, click Reset. Firmware Update The Upgrade page on the Web Server allows the product to be updated with the latest firmware. Go to https://www.chauvetprofessional.com to download firmware updates. Security The Security page on the Web Server gives the option to change the password to the connected product’s web server. Enter the old password (admin, by default) and the new password twice, then click Save Settings to change the password.

24

Maverick Storm 4 Profile User Manual Rev. 4

Operation Gobo Wheels
Gobo Wheel 1

Gobo Wheel 2

Gobo Wheel 1

Gobo # 1 2 3 4 5 6

Gobo Dimensions

Description Dots Paperclip Party Orbital Dirty Dirt Box Cutter Crazy Turns

Gobo Wheel 2

30 mm 25 mm

Gobo # 1 2 3 4 5 6

Description Pipes & Poles Cookie Cutter This Way Fast Moves Laser Rays Limbo

IMAGE

Maverick Storm 4 Profile User Manual Rev. 4

25

Operation
Gobo Replacement
The gobos in both gobo wheels are removable from their gobo holder. This operation is quite simple, although it requires the technician to carefully follow the recommended procedure.
· Make sure to disconnect the product’s power cord before replacing a gobo. · Always replace a gobo with a gobo of the same dimensions. · When inserting a glass gobo, always make sure that the shiny side of the gobo (glass base)
faces the light source. This provides a layer of protection against the high temperature from the LED. Procedure 1. Turn the product off and disconnect it from the power outlet. 2. Open the head cover by loosening the screws on the top cover. 3. Separate the gobo holder away from the gobo wheel by pushing it toward the front of the moving head (direction 1 in the diagram). Be careful not to push the gobo out of the gobo holder. 4. Extract the gobo holder by pulling it outward (direction 2 in the diagram). 5. On a flat surface, remove the expansion ring that holds the gobo in place and remove the gobo from the gobo holder. 6. Insert a new gobo and hold it in place with the expansion ring. 7. Slide the tip of the gobo holder under the pressure plate near the center of the gobo wheel. 8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If correctly installed, the gobo holder should easily slide into the gobo wheel slot. Diagram

Locate

Pull Back

Remove
Gobo Holder Gobo Retaining Ring

26

Maverick Storm 4 Profile User Manual Rev. 4

Maintenance
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean all lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below:
1. Unplug the product from power. 2. Wait until the product is at room temperature. 3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents. 4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol. 5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue. 6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Do not spin the cooling fans with compressed air. Damage may result.

Maverick Storm 4 Profile User Manual Rev. 4

27

Technical Specifications

6. Technical Specifications

Dimensions and Weight

Length

Width

Height

18.30 in (465 mm)

11.93 in (303 mm)

32.91 in (836 mm)

Note: Dimensions in inches are rounded. Power

Power Supply Type Switching (internal)

Range 100 to 240 VAC, 50/60 Hz

Weight 110.8 lb (50.3 kg)
Voltage Selection Auto-ranging

Parameter
Consumption Operating Current
Fuse/Breaker

100 V, 60 Hz 1892 W 18.92 A
25 A, 750 V

120 V, 60 Hz 1780 W 15.07 A
25 A, 750 V

208 V, 60 Hz 1740 W 8.70 A
25 A, 750 V

230 V, 50 Hz 1760 W 7.79 A
25 A, 750 V

240 V, 50 Hz 1780 W 7.51 A
25 A, 750 V

Power I/O

U.S./Worldwide

UK/Europe

Power Input Connector Power Cable Plug

Seetronic Powerkon A Bare end

Seetronic Powerkon A Bare end

Light Source

Type

Color

Quantity

Power

Current

Lifespan

LED

Cool White

1

1250 W

4 A

50,000 hours

Photometrics

Beam Angle

Field Angle

Cutoff Angle

Zoom Angle

5.6° to 48°

6.6° to 54.4°

7.1° to 56.8°

5.6° to 56.8°

Illuminance @ 5 m (5.6°)

Illuminance @ 5 m (54.4°)

134,034 lux

4,241 lux

Thermal

Maximum External Temperature

Cooling System

113 °F (45 °C)

Fan-assisted Convection

Control

DMX I/O Connector

Ethernet I/O Connector

5-pin IP-rated XLR

Neutrik IP-rated RJ45

Ordering

Product Name

Item Name

Item Code

Maverick Storm 4 Profile MAVERICKSTORM4PROFILE

08011958

Channel Range 38 or 55
UPC Number 781462223069

UL 1573 CSA C22.2 No. 166 E113093

28

Maverick Storm 4 Profile User Manual Rev. 4

Contact Us

Contact Us

General Information

Technical Support

Chauvet World Headquarters

Address: 3360 Davie Rd.

Voice: 844-393-7575

Davie, FL 33314

Fax: 954-756-8015

Voice: 954-577-4455

Email: chauvetcs@chauvetlighting.com

Fax: 954-929-5560

Toll Free: 800-762-1084

Website: www.chauvetprofessional.com

Chauvet U.K.

Address: Pod 1 EVO Park

Email: UKtech@chauvetlighting.eu

Little Oak Drive, Sherwood Park

Nottinghamshire, NG15 0EB

Website: www.chauvetprofessional.eu

UK

Voice: +44 (0) 1773 511115

Fax: +44 (0) 1773 511110

Chauvet Benelux

Address: Stokstraat 18

Email: BNLtech@chauvetlighting.eu

9770 Kruishoutem

Belgium

Website: www.chauvetprofessional.eu

Voice: +32 9 388 93 97

Chauvet France

Address: 3, Rue Ampère 91380 Chilly-Mazarin

Email: FRtech@chauvetlighting.fr

France

Website: www.chauvetprofessional.eu

Voice: +33 1 78 85 33 59

Chauvet Germany

Address: Bruno-Bürgel-Str. 11 28759 Bremen

Email: DEtech@chauvetlighting.de

Germany

Website: www.chauvetprofessional.eu

Voice: +49 421 62 60 20

Chauvet Mexico

Address: Av. de las Partidas 34 – 3B (Entrance by Calle 2)

Email: servicio@chauvet.com.mx

Zona Industrial Lerma

Website: www.chauvetprofessional.mx

Lerma, Edo. de México, CP 52000

Voice: +52 728-690-2010

Warranty & Returns

For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty- registration.

Maverick Storm 4 Profile User Manual Rev. 4

29

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals