MAVERICK 150500-006 RC Vehicle Atom Monster Truck User Guide
- June 1, 2024
- Maverick
Table of Contents
- MAVERICK 150500-006 RC Vehicle Atom Monster Truck
- Product Information
- FAQ
- Safety Precautions
- Overview
- Charging Battery
- Transmitter Battery Installation
- Operating Procedures
- Maintenance after driving
- Further Information
- Guarantee
- FCC STATEMENT
- Trouble Shooting
- Parts List
- Exploded View
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MAVERICK 150500-006 RC Vehicle Atom Monster Truck
Product Information
Specifications
- Model: Maverick RC
- Volume: 1
- Part Number: 150500-006
FAQ
- Q: Is it safe to run RC models near people or animals?
- A: No, it is not safe to run RC models near people or animals as it can cause serious accidents or injuries.
- Q: What should I do if I encounter an error while charging the battery?
- A: If you encounter an error while charging the battery, ensure correct connections and refer to the manual for troubleshooting steps.
Thank you Danke
- Thank you for selecting this Maverick RC product! HAVE FUN! But please read this first !!
- We know you will have great fun with your model, but to get the best from your purchase please read this information BEFORE you operate the model.
Website Download
- You can download a digital copy of the manual at the following URL, or by scanning the QR code.
- www.maverick-rc.com/instructions.
Safety Precautions
- This product is an authentic radio-controlled vehicle (RC vehicle) and it is not a toy.
- Read and understand this instruction manual thoroughly before running the model.
- If you are not familiar with RC vehicles, we recommend that you ask someone familiar with RC vehicles for advice.
- Never connect the rechargeable drive battery in the reverse polarity or disassemble the battery. If the drive battery is used in the wrong way, a high current can be generated and it is very dangerous.
- Never run RC models near people or animals, or on public streets or highways. This could cause serious accidents, personal injuries, and/or property damage.
- Make sure the mains power socket when using a charger is readily accessible and never left plugged in when not in use.
- If you are using Rechargeable AAs for the Transmitter please make sure you also purchase a suitable charger for this battery type.
Overview
Components
Equipment Needed
Getting Started
Charging Battery
- Only use the included charger to charge the battery pack.
- Do not leave the battery back unattended whilst charging.
- Do not use damaged or leaking batteries and chargers.
- Children should not charge the battery without adult supervision.
- Always disconnect the battery from the ESC and remove it from the vehicle when you are not using it.
- Please fully charge the battery before each use.
- Do not leave the battery uncharged for a long time.
- Do not fully discharge the battery while driving the vehicle.
- Do not charge the battery in wet or humid conditions. Charge only in dry conditions.
The USB Charger requires a USB Adaptor with an output of at least 2A (Not included)
- Connect the charging socket to the supplied battery pack’s power plug. The connectors are sided and have a clip to secure it in place. Do not force together and always check you have the connection the right way round.
- The charger will automatically start to charge your battery pack. The USB charger will stop charging when it detects the battery pack is at full charge.
Error: Voltage out of charging range. If this is reoccurring your battery pack may be damaged and need replacing.
Setup Before Starting
Transmitter Battery Installation
- Open the battery holding tray to expose the empty battery slots. Insert 3 AA batteries into the marked spaces.
- Please note the correct direction of the batteries. Incorrect battery insertion could damage the transmitter.
Battery installation
- You need to insert the battery pack in the open section for the battery. Use the straps provided to secure the battery in place.
- Once fastened and secured please connect the battery plug to the speed controller plug noting the correct polarity. Red to red, black to black.
Operating Procedures
Transmitter Information
- Steering Wheel
- Throttle Trigger
- Steering Trim
- Throttle Trim
- Power Indicator
- Power Switch
Switch On Radio
-
Turn on the transmitter first and then turn on the receiver.
-
Turn on the transmitter switch and the LED battery indicator will light up.
-
The Red LED will continuously show if the installed AA batteries have sufficient charge.
-
The Red LED will flash if the batteries need replacing.
-
The Green LED will flash to indicate the transmitter is ready for pairing.
-
Then press the button on the ESC/Receiver to power on the car.
-
The Green LED on both the Transmitter and Receiver will continuously show once the pairing is complete.
Transmitter Operation
Reverse operation: Forward → Brake Twice → Reverse
Steering Trim Setup
Throttle Trim
- The Throttle Trim is a throttle limiter.
- Turning the switch down reduces the top speed to 40% of the maximum speed.
- Turning the switch up increases the speed up to 100%.
Practice Turning
- When the car is running toward the driver, the directions of the steering wheel are reversed.
- Once you become comfortable driving your RC car, practice driving on a track with cones.
- Allow the car to cool down for 15 minutes between each run.
Cautions
- Do not run in water or sand.
- Do not run on public streets or highways. This could cause serious accidents, personal injuries, and/or property damage.
Turning R/C Unit Off
- Turn off the receiver first, then turn off the transmitter.
- If you switch off the transmitter first before the R/C car, you may lose control of the R/C car.
Cautions
- Disconnect the battery when you are not running the vehicle.
- The vehicle may run out of control or the battery can overheat and cause a fire.
Maintenance after driving
- Proper maintenance is very important.
- After running, clean the chassis and check all moving parts for damage.
- If any parts are broken or damaged, repair or replace them before the next run.
- Regular maintenance is necessary to prevent damage to the car and maintain its performance.
- Completely remove all dirt and debris from the vehicle, especially in the suspension, drive shafts and steering parts.
- Inspect each part and screw for loosening, missing parts or damage.
- For the maintenance schedule, refer to the bottom chart.
Further Information
Driving in wet conditions
This vehicle is designed to provide water protection for the on-board radio
system components so it can be driven in wet conditions. The vehicle is not
designed to be completely submerged in water. Driving in wet conditions will
require additional maintenance.
Notes
- Never drive the vehicle in stormy conditions where lightning could be present. The transmitter is not waterproof, always keep it protected from rain and water.
- Remove all water/mud and dry the vehicle completely after driving. Check the vehicle for trapped water in the tyres, transmission etc. Some metal parts like bearings and hinge pins will need lubrication after driving in wet or damp conditions.
- The electric motor is not designed to be submerged in water. If water gets inside it can reduce the life of the motor. Most battery packs are not designed to operate in wet conditions.
- After running in water, dry off any water from the ESC and connectors.
Guarantee
90 Day Component Guarantee
This product is covered by a 90 day component guarantee from date of purchase.
If any part of the product fails as a result of faulty manufacture during this
period then we will repair or replace that part at our discretion. We do not
operate a new for old guarantee once the product has been used. Please note
this product is not a toy and it is recommended that children 14 and under are
supervised by an adult. It is the responsibility of the parent or guardian to
ensure minors are given appropriate guidance and supervision. If you suspect
there is a problem with the product, for whatever reason, it is the user’s
responsibility to investigate and take steps to rectify the problem before
further damage occurs.
Not Covered By Guarantee
This is a sophisticated, high performance model and should be treated with
care and respect. Every effort has been made to make this product as strong
and durable as possible, however due to the nature of this product, it is
still possible to break or damage parts through crashing or extreme use.
Components damaged as a result of crash damage, improper use, lack of
maintenance or abuse are not covered by the guarantee.
How to Claim Against your Guarantee
For guarantee claims please contact your supplying retailer. Do not return the
product to your retailer without their prior approval. You may not need to
return the product in full, only the damaged component along with a copy of
your purchase receipt. In many cases it is faster and more cost effective for
the user to fit the replacement part(s) to the product & therefore we reserve
the right to supply parts in these instances. Any returned component that is
inspected by your retailer and found to have an invalid guarantee claim may be
subject to an inspection and handling fee before it can be returned. Any
repairs required as a result of neglect or misuse will be charged before any
work is carried out on the product. If you decide not to have any work carried
out the retailer reserves the right to charge a handling and a shipping fee.
Please attach your proof of purchase in the manual as you may need it again in
the future.
Legal Information
- Do not dispose of electrical components in household waste. Please use local waste disposal centre.
- The radio equipment type in this product transmits within the frequency range 2.4 to 2.485 GHz with a maximum power of 20dBm and is in compliance with EU Directive 2014/53/EU. The full text of the Declaration of Conformity is available at http://ce.blackzon.com/.
FCC STATEMENT
FCC Compliance
This device transmits within the range 2.4 to 2.485 GHz and has been tested to
comply with the limits for a Part 15 Class B device of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. Any change or modification to the device not expressly
approved by the manufacturer may void the user’s authority to operate the
equipment. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Trouble Shooting
If you encounter any other fault whilst operating the vehicle please contact your local hobby shop.
Parts List
Parts # Description
- 150504 Main Chassis
- 150505 Upper Chassis Set
- 150506 Chassis Parts Set
- 150507 Front Bumper & LED
- 150508 Rear Bumper & Wheelie Bar
- 150509 Shock Tower & Body Post Set
- 150510 Front Suspension Arm Assembly
- 150511 Rear Suspension Arm Assembly
- 150512 Steering Arm Set
- 150513 Hinge Pin Set
- 150514 Steering Linkage Set
- 150515 Servo Horn & Screw
- 150516 Rear Driveshaft and Axle Set (2pcs)
- 150517 Front Universal Driveshaft Set (2pcs)
- 150518 Shock Absorber Set (Blue/4pcs)
- 150519 Shock Absorber Set (Red/4pcs)
- 150520 Shock Absorber Set (Orange/4pcs)
- 150521 Shock Absorber Set (Green/4pcs)
- 150522 Complete Differential
- 150523 Centre Drive Shaft
- 150524 Diff Pinion Gears (2pcs)
- 150525 Spur Gear
- 150526 Ball Bearing 6x10x3mm (4pcs)
- 150527 Bushing 8x12x3mm (4pcs)
- 150528 12mm Wheel Hex Hub Set (4pcs)
- 150529 Flanged Lock Nut M3 (4pcs)
- 150530 Hardware Set (Atom)
- 150531 Assembled Bodyshell (Blue)
- 150532 Assembled Bodyshell (Red)
- 150533 Assembled Bodyshell (Orange)
- 150534 Assembled Bodyshell (Green)
- 150535 Assembled Wheel & Tyre (2pcs)
- 150536 Wheel Washers (Blue/4pcs)
- 150537 Wheel Washers (Red/4pcs)
- 150538 Wheel Washers (Orange/4pcs)
- 150539 Wheel Washers (Green/4pcs)
- 150540 Maverick MTX-200 2.4GHz 2Ch Transmitter
- 150541 MSRS-200 2in1 ESC/Receiver 2.4GHz
- 150542 MM-200 Motor w/Pinion
- 150543 MS-200 Servo
- 150544 Maverick Element 7.4V 1300mAh Li-Ion Battery Pack
- 150545 USB Charger
- 150546 Body Clips (4pcs)
- 150547 Heat Sink (Blue)
- 150548 Heat Sink (Red)
- 150549 Heat Sink (Orange)
- 150550 Heat Sink (Green)
- 150551 Transmitter Wheel Foam & Decals (Blue)
- 150552 Transmitter Wheel Foam & Decals (Red)
- 150553 Transmitter Wheel Foam & Decals (Orange)
- 150554 Transmitter Wheel Foam & Decals (Green)
- 150530 Hardware Set (Atom)
- a Pan Head TP. Screw 2.6x8mm
- b Pan Head TP. Screw 2.6x6mm
- c Step Screw 3x8mm
- d Flanged Screw 2.5x8mm
- e Flanged TP. Screw 2.3x5mm
- f Flat Head Screw 2.5x6mm
- g Flat Head TP. Screw 2.6x5mm
- h Pan Head TP. Screw 2.3x6mm
- i Flat Head TP. Screw 2.6x8mm
- j Pan Head TP. Screw 1.7x7mm
- k Flanged TP. Screw 2.6x6mm
- l Pan Head Screw 3x12mm
- m Pivot Ball Screw
Optional Parts
Parts # Description
- 150555 Aluminum Oil-Filled Shock Absorber Set (Blue/4pcs)
- 150556 Aluminum Oil-Filled Shock Absorber Set (Red/4pcs)
- 150557 Aluminum Oil-Filled Shock Absorber Set (Orange/4pcs)
- 150558 Aluminum Oil-Filled Shock Absorber Set (Green/4pcs)
- 150559 Steel Rear Driveshaft and Axle Set (2pcs)
- 150560 Steel Front Universal Driveshaft Set (2pcs)
- 150561 Steel Drive Cup Set (2pcs)
Exploded View
Exploded View
CONTACT
- HPI RACING A/S
- Jegindoevej 21
- 8800 Viborg, Denmark
- Email: info@hpiracing.com.
- WWW.MAVERICK-RC.COM.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>