Waterdrop G2FCT-GD Drinking Water Faucet Installation Guide
- June 15, 2024
- Waterdrop
Table of Contents
G2FCT-GD Drinking Water Faucet
Installation Guide
Parts List
Installation Steps
NOTE: Please check on whether there is an existing hole available in
which to install the faucet. If there is not, drill a hole in accordance with
the following steps. It’s highly recommended that you watch the YouTube video
“How to Drill Faucet Holes” to better understand the process. There is also a
sticker for your reference to drill the hole.
Step 1. Insert the faucet stem into the hole on the countertop.
Step 2. Under the sink, put the mounting washer on the faucet stem. Slip on
the wing nut and tighten it.
Step 3. Choose the right accessory package according to the size of your PE
tubing. Put the black seal ring on the bottom of the fittings.
Step 4. Screw the quick-connect fitting tightly onto the faucet stem.
Step 5. Insert the tubing into the push-in fitting and secure it with the blue
clip. Make sure the tubing is fully inserted.
Step 6. Turn on the water purification system to flush the faucet for 1
minute. At the same time, check for leaks. 
WARRANTY:
We offer a 30-day money-back guarantee, a 2-year manufacturer warranty, and
lifetime technical support for all our products. Failure to follow
instructions and operating specifications will void your warranty. Further,
the manufacturer assumes no responsibility or liability for damages arising
out of misuse of the product.
Manufacturer Technical Support
Tel: 1-888-352-3558 (U.S.)
E-mail: service@waterdropfilter.com
Made in china
Qingdao Eco pure Filter Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>