SmallRig Vibe P96 LED Video Light User Manual

SmallRig Vibe P96 LED Video Light User Manual

Foreword

Thank you for purchasing Small Rig’s product.

Warnings

• Please read this User Manual carefully.
• Do not use the product in water because it is not dust or water proof.
• Do not let the product fall to the ground, be hit or suffer violent impact.
• Do not use the product in the completely closed environment, or it may lead to rise of internal temperature, which causes product failure, ignition or other accident
• Do not look straight at the LED bead in use from close range, or it may cause visual impairment.
• Do not place the product nearby any combustible or volatile solution, or it may cause a fire disaster or smog
• Be sure to power the product off when it is not in use. • Never remove the non-detachable lithium battery without permission.
• Do not pick up the camera by grabbing the holder of the filling light.
• When the battery is not in use for a long time, please charge and discharge the battery every 6 months, and provide it with about 60% of the electric quantity to prolong its use life.
• Since there are some hazardous substances in the battery, please do not discard it. Instead, dispose of the product that is damaged or will never be used according to the waste management measures.

Please do not disassemble the product or change its battery. If you have any question, please contact the seller to apply after-sales service.

Intended Use

• Please read this User Manual carefully, especially the “Warnings”.
• Please use or store the product in the environment mentioned herein.
• It will be regarded as an improper use when the users are not correctly follow the user manual or use the product under the specific working condition.

In the Box

• Vibe P36 LED Video Light 1

• US8-C Charging Cable 1

• User Manual 1

Specifications

Light: 240Chromatic
Light: 240
Color Rendering Index| ≥95
Maximum Power Consumption| 5W
Battery Specification| 2200mAh/3.7V/8.14Wh
Compensatory Range| ≤5m
Lamp Beads| 96
Volume| 72x89x31.6mm
Operating Temperature| -10°C~50°C
Input| 5V m 1A

Product Details

1. On/Off Button
2. The Indicator Light
3. Adjust/Press the Knob Button
4. Charging Port
5. Fixed Screw Hole (1/4 inch)
6. Hot Boot Interface

Note: the brightness and color temperature of the light can be adjusted when the non-polar knob s clockwise/counterclockwise. When the key is pressed toggle the color temperature or brightness adjustment.

Installation Instructions for LED Video Light

‘When the fil-up light is installed on the camera, SLR, and tripod

1. Insert the cold shoe adapter of the LED video light directly into the camera mount and tighten it clockwise.
2. Tighten the screw hole at the joint of the screws on the tripod, then the cold shoe connection at the bottom of the light and adjust the proper Angle of the light for light filling operation.

Product introduction

“This product Vibe P96 LED video light adopts 2700K ~ 6500K LED liht source. Click to adjust the color temperature, knob switch can adjust the brightness.

Product function description and characteristics

1. This product is made of LED lamp beads with 2 kinds of color temperature (48 for each). Large power, small heating, long service lfe.
2. Infinite brightness adjustment, adjust the brightness of it the us ofli ght more professional
3. Double color temperature adjustable, can set different atmospheres effect, such as sunrise and sunset
4. Built-in high capacity 2200ma lithium battery et you use more durable, more convergent       .
5. Projection different lighting effects in different environments to add more fun to your shooting.

Directions for use

1. Switch/lighting button
   press the button to switch the machine on and off, Long press to enter the lighting state (maximum brightness)

2. Indicator lights
   5 LED indicator lights (1 green and 4 white):
   White light:

3. 4 white indicator lights show power

4. 4 lights on, the battery is 100%

5. 3 lights on, the battery is 75%

6. 2 lights on, the battery is 50%

7. 1 light on, charge is 25%
   low power indication, the last white light flashing full of 4 white lights always on
   Green light: the green light flashes, when the mode is to adjust the color temperature state, The green light is always on, when the mode is in the brightness state.

8. Lighting mode
   long press the switch button to enter the lighting mode directly under the power-on state. In this mode, all LED lights reach maximum brightness.

9. Color temperature adjustment
   press the knob button, rotate the knob button to adjust the color temperature of the supplement light. The adjustable range is 2700K-6500K.

10. Brightness adjustment
    press the knob button and rotate the knob button to adjust the brightness of the filling light.

Service Warranty

Please keep your original receipt and quarantee card. Be sure the dealer has written on it the date of purchase and SN of the product. These are required for warranty service.

After-sale warranty terms:

1. 7 Days DOA Return Policy. Within 7 days from the date of the package receipt, return or replacement can be done if the item received is malfunctioning or physical damaged (not caused by human abused), return shipping cost will be on Small Rig’s charge. 2
2. SmallRig products are entitled to warranty services as of the date of payment.
   • Electronic products: 1-year warranty, 1-year free warranty service.
   • Non-electronic products: 2-year warranty, 2-year free warranty service.
     Note: In case of any conflict between our warranty period policy and applicable laws and regulations of the country/region where the products are sold, the latter shall prevail.

This warranty does not cover:

1. Defect caused by users’ violation of the “Warnings” and “Intended Use”.

2. The product identification or SN label is removed or defaced in any way.

3. Product damage caused by problems not attributable to the quality of the products such as improper
   use of the products.

4. Product damage caused by unauthorized modification, disassembly, repair and other acts.

5. Product damage caused by fires, floods, lightning and other force majeure factors.

Warranty Mode:

• For the products within the scope of warranty, Small Rig will repair or replace them on the basis of specific failures, the repaired/replaced products/parts are entitled to the remaining part of the original warranty period.

Contact Information:

• You’re advised to contact the online customer service personnel of corresponding shopping platform and submit a repair service application.
• You may also apply for repair service through Small Rig’s service email.

Service Email: support@smallrig.com
For more support information: www.smallrig.com/support

Guarantee Card

• 1D No.
• ltem Name
• Purchase Date
• User Name
• Mobile
• Address
• Receipt

Prolin GmbH
Brehmesir 56,40239 Dusseldorf Germany
eumeuiinkeu

Prolin Globl LTD
270 Gloucester Street London WCTNIAX, UK
eugeuiinkey

Manufacturer: Shenzhen Leqj Network Technology Co, Lid ‘Add: Rooms 103, 501 and 601, Buiding 5, Fenghe Industrial Park, Nos. 1301-50 Guanguang Read, Longhua District, Shenzhen, Guangdong, China

Consignor: Shenzhen LC Co., Ltd. Add: Rooms 602, Building 5, Fenghe Industrial Park, No. 1301-50 Guanguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.

www.smallrig.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>